Question about 1998 Plymouth Neon

1 Answer

Where are all relay that run brake lights - 1998 Plymouth Neon

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 4,977 Answers

These don`t use relays in their systems.they have a fuse,brake switch,and it works with the signal switch system,wiring.you don`t say what your problem is.

Posted on Feb 08, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

93 toyota corolla brake lights stay on when running lights are turn on but when running lights are turn off brake lights work correctly


Short in the electrical system. Work around by pulling fuses specific to brake lights (Exterior) to narrow down the problem. Check relays also.

Aug 22, 2014 | Cars & Trucks

1 Answer

95 Regal Custom, ABS code #95 brake switch circuit and no brake lights. Replaced SLS still no change.


Check the brake light switch (location pedal) unplug the switch & bridge the wires & if the brake lights come on the switch is faulty. all you are doing by bridgeing the wires is bypassing the switch. What is SLS?

Oct 10, 2012 | Buick Regal Cars & Trucks

1 Answer

2004 Cadillac CTS break lights


Hello! There is a relay called the BAS relay (brake assist) that controls both the top brake light and the lower lights...Since the top light works the relay is doing its job...However, the relay output is connected to several White wires that carry the same voltage to all brake lights...One of those White wires (the one that carries voltage to the lower lights is open)...There is a Joint Connector located with the BAS relay in the Left rear fuse block...One White wire coming in from the relay contact and 3 White wires leaving...#1 to the top brake light...#2 left brake light and #3 right brake light...It would appear that the junction of #2 and #3 are open inside the Junction block...Not the easiest fault to find and fix...
If you have a multimeter I'll guide you through the process...Or you can take it to a wiring specialist...Wiring Junction blocks look like hair combs (multi-tooth metal combs that push into a connecter with several wires all the same color...In this instance WHITE WIRES...When someone depresses the brake pedal +12 volts must be on all three white wires...Send a comment...Guru...saailer

Dec 11, 2011 | Cars & Trucks

1 Answer

Where is the relay for the hi mount brake light ona 1996 chevy s10? Brake lights work but hi mount does not. Checked the bulbs, and fuse is good. Manual says there is a relay.


the magic one does all relay or the hiding multipurpose magic relay ,think you will find that the light runs off a loop from one of the back lights .

Dec 23, 2009 | 1996 Chevrolet K1500

2 Answers

Rear turn signals and brake lights out. Front signals and rear tail lights work fine.


the brake lights and the rear turn signals should be the same bulb check the bulbs to make sure they are not blown does your third brake light work if all brake light are out and the bulbs are good check the brake light switch on the brake pedal

Nov 04, 2009 | 1986 GMC C1500

1 Answer

Where is the brake light relay on a 1984 Fiero


Check the brake light switch. It's located under the dash by the brake pedal. Disconnect the electrical connector from the switch. Jump the connector with a paper clip. Be careful not to let the paper clip touch a metal surface. If the brake lights come on then the problem is a faulty brake light switch.

Sep 27, 2009 | 1984 Pontiac Fiero

2 Answers

98 olds bravada brake lights not working


Check the brake light switch under the dash where your break peddle arm rest against when it's not pushed down. Also there is a relay in the glove box, you'll see a panel in the glove box that say relays. There are three relays in there, one for the A/C , the fuel pump and brake  light. I believe the fuel pump is the middle, i can not remember which side is the brake light relay is but if you turn on the a/c while the engine is running you may hear and feel which relay is the a/c when the compressor kicks in.
Good luck and keep me posted.

Jun 01, 2009 | 1998 Oldsmobile Bravada

5 Answers

Chevy s10 brake lights


If the problem is that the brake lights will not turn off, the problem is most likely the CHMSL relay. An easy check is to take the cover off the fuse block mounted on the driver's side fender well and swap the fog lamp relay with the CHMSL relay. If that fixes it, just get a new relay for the fog lamps and you're good to go. Note, my 2002 s10 does not have fog lamps, but it still had the relay populated in the fuse block.

Jul 25, 2008 | 2001 Chevrolet S-10

Not finding what you are looking for?
1998 Plymouth Neon Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...