Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: PCV valve for 2004 Hona CRV
PCV Valve Operation:
A vacuum-controlled metering device that regulates the flow of crankcase fumes in the positive crankcase ventilation system by allowing more flow at high speed than at low speed, and acts as a system shutoff in case of engine backfire to prevent an explosion in the crankcase.
Depending on your engine size, the PCV is a different style and slightly different location.
Usually they are mounted in a hole on your valve cover.... connected by a vacuum tube.
Some are mounted with threads into the engine block (usually by the oil filter)
On the '04 Crv - it is nearly inaccessible behind the AC compressor and beneath what looks like an old vacuum advance. Most PCV valves today do not need to be replaced, unless there is actual valve failure, which I have not seen happen. I would not be concerned about replacing it.
Thanks for using FixYa - a FixYa rating is appreciated!!
Posted on Feb 21, 2009
SOURCE: 2003 Honda Civic -LX Timing belt
I tried to get my timing belt/water pumped changed at 96,000K's and my dealer told me the belt in our 2003 Civic is good for 7 years or 168,000K's. I didn't believe him, so I called another dealer out of town and they told me 7 years or 184,000K's.
Posted on Jun 20, 2008
go to an auto parts store and purchase a repair manual it will clearly tell you how to remove the radio . read and understand the directions carefully if you have questions ask the partscarrier they often can assist you
Posted on Jun 22, 2009
SOURCE: PCV VALVE REPLACEMENT
The pcv valve is usually located on one of the valve covers look for the larger vacuum hose coming from the intake manifold and follow it you should find it that way. changing it is a matter of sometimes using a pair of pliers to remove a small clamp then rotate back and forth the pcv valve while holding the hose and pulling it away and off.
Posted on Jul 02, 2009
Step one Look at the inside door handle. Behind it you should see a little cover, You pop that off and there will be 2 phillips head screws behind it. remove them.
Pop out the door handle, and unplug the power lock plug,
Youll also have to take the door lock rod, by spinning the plastic door handle 90 degrees until u can wiggle it out.
next remove the sail panel( The little triangle shaped piece in the corner of the door on the top, ( may have a tweeter in it) ( it just pops out)
Next take a screwdriver (flat head) and pry off the cover of the door handle, there will be
2 phillips head screw behind it ( remove screws)
Unplug power window connector (big green plug)
Now just start gently pry the door panel off with a screw driver, see if u can peek behind the panel and see where the panel clips are, and pry near those areas
Posted on Apr 03, 2010
Tips for a great answer:
Feb 08, 2012 | 2003 Honda Civic
May 05, 2011 | 2004 Honda Civic
Apr 26, 2010 | 2003 Honda Accord
Jun 29, 2009 | 1993 Honda Civic 4 Door
Apr 19, 2009 | 1990 Honda Civic
Jun 29, 2008 | 1993 Honda Civic 4 Door
201 people viewed this question
Usually answered in minutes!