Question about 1993 Pontiac Grand Am

1 Answer

Power door locks won't lock

The botton on the door for the power locks won't lock or unlock the door

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 5,370 Answers

For Doors not getting open with remote or key problem, there are help links provided below. Click the link below to go through its procedure and troubleshoot the problem: ----
Drivers side front door will not open from inside or outside?

http://technoanswers.blogspot.com/2012/01/ford-f-350-crew-cab-drivers-side-front.html

----------

Car door will not close?
http://howtobyme.blogspot.com/2011/11/car-door-will-not-close.html

--------

All power door locks not working?
http://howtobyme.blogspot.com/2011/11/all-power-door-locks-not-working-on_14.html

----------

Repairing car Door lock Actuator?
http://howtobyme.blogspot.com/2011/11/repairing-car-door-lock-actuator.html
---------------
How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

----------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

---------
Truck Door will not close?

http://schematicsdiagram.blogspot.com/2011/12/ford-truck-door-will-not-close.html

-----------
Where is Cars Door control Module located?

http://schematicsdiagram.blogspot.com/2011/12/where-is-cars-door-control-module.html

--------
Power door locks not working?

http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html

-----------
Door ajar light stays on?

http://technoanswers.blogspot.com/2012/01/door-ajar-light-stays-on.html

----------
Door locks not working?

http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html

----------
Front Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/front-door-dis-assembly-diagram-for.html

---------
Rear Door dis-assembly diagram?

http://repairhelpcenter.blogspot.in/2012/02/rear-door-dis-assembly-diagram-for.html

--------
How to test Power door locks?

http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html

--------
Doors will not open with Remote?

http://schematicsdiagram.blogspot.in/2012/02/lexus-doors-will-not-open-with-remote.html

--------

How to replace Door Hatch ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-hatch-on-acura-integra.html

---------

How to remove Doors?

http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-doors-on-acura-integra.html

-------`-

How to Replace Doors?
http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-doors-on-audi-a4-and-vw.html

--------

Remote will not unlock Rear door?
http://schematicsdiagram.blogspot.com/2011/12/remote-will-not-unlock-rear-door-on-gmc.html

--------

Door locks or windows not working on car?
http://schematicsdiagram.blogspot.com/2011/07/door-locks-or-windows-not-working-on.html


----------
Central locking not working?

http://schematicsdiagram.blogspot.in/2012/03/this-is-how-system-operates.html




This will help.

Thanks.

Posted on Mar 02, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: power door lock

check the recall list.

Posted on Oct 23, 2008

tommyboinow
  • 324 Answers

SOURCE: power lock wont lock door on 99 grand am will only unluck them.

it is more than likely your buttons, if one button is bad neither will work.

Try changing the buttons, if that does not work, then it could be one of the motors,
same as the buttons if one is bad neither will work.

to change the buttons, simply remove the screw on the panel, if there is one, if not then insert a small flat head screw driver on the bottom of the panel and gently push down this will pop the panel out.

once you get it out pull the plug off, there is 2 8mm screws holding the switch in, then screw your new one in and plug it back in, do the same on the other side. the panel will just snap right back in.

If this does not work, check the motor, you have to remove the door panel, then the silencer pad, once you get in, it will be inside the door near the back. about half way down, it is round with a rubber boot, it is held in with some rivets. If you need to replace it you will have to drill them out, and replace with nut and bolt.

To test it, if you have a corless drill... pull the plug from the motor, and stick 2 wires into the plug, one for positive and one for negitive, and touch the ends to the battery. if it does nothing then it is your motor, but make sure you switch the wires from one side ot the other to test both up and down.
One wire is for up and one if for down.

If you do not have a cordless drill battery just use long peices of wire and use the car battery.

Don't worry there is not enough power in a car battery to shock you.

Posted on Nov 26, 2008

  • 7 Answers

SOURCE: 2002 Montana power door locks

u r on ur child lock u deactivat ur child lock .

Posted on Mar 14, 2009

  • 179 Answers

SOURCE: power door lock doesnt work properly, it unlocks but wont lock

check you wires to see how much power is being received

Posted on Jun 04, 2009

  • 104 Answers

SOURCE: power door locks, and power side windows wont owrk

check wiring at drivers door hinge inside protectve loom,should find broken wiring

Posted on Oct 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Expedition driver door won't lock/unlock with remote


This sounds like you may have a bad lock actuator, there is an actuator that controls the lock, it may need replacing, you will need to remove the door panel to gain access to it, then with a testlight you will test to make sure the actuator is getting power and a ground and if it tests good for power and ground then replace it and door lock will start working again, this part is about 30.00 dollars. here is a picture of it. good day3_10_2013_6_17_11_pm.jpg

Mar 10, 2013 | Cars & Trucks

1 Answer

Replaced door lock fuse on 03 Suburban, doors still won't unlock.


You need to replace the Unlock Relay, it should be in the fuse panel on the passanger side.

Dec 03, 2012 | 2003 Chevrolet Suburban

1 Answer

Power door lock switch?


Sounds like the drivers door lock switch is bad an as far as the auto start remote the contacts under the button get dirty and won't make contact, open the remote like changing the battery and you can probably get at the contact button, if it's a little carbon button they can be cleaned with a pencil eraser and then paper tower with a bit of rubbing alcohol, if it's an actual switch you can try spraying some contact cleaner into the switch. let it dry before you put the battery back in.

Nov 11, 2012 | Ford F-150 Cars & Trucks

1 Answer

Nissan 1990 pathfinder doors won't unlock


Door locks are powered through a circuit breaker (location not indicated) which applies 12V to the door lock timer. Insertion of the key causes the door lock actuator to unlock the door ...unless the timer prevents it. It is doubtful that all the doors could have failed lock components

Oct 15, 2012 | 1990 Nissan Pathfinder

1 Answer

My 2006 g35x won't stay locked the unlock botton


check for a short or a bad wire sounds like a bad conection check your conections

Aug 12, 2012 | Cars & Trucks

1 Answer

What's your problem?i have a 1992 chrysler new yorker and the power doors are not working. when you try to use the lock/unlock botton nothing happens, howerver when u go over 15mph it tries the sa


First check the ground wire in the door. Then check the connector on the back of the drivers side lock switch for corrosion. If there is, it is easiest to replace the switch. Everything for the power door lock solenoids routes through that drivers door switch.

You can try jumpering the harness connector cavities with a bent paperclip (hold it with a plier when you do as it can get hot). If the locks pop as they should- replace the switch.

Feb 04, 2012 | 1992 Chrysler New Yorker

1 Answer

The doors will not lock or unlock from the door but will from the remote?


The title suggest the door won't unlock unless the remote is used but during the summer it was the inverse. If while inside the car the doors will not lock or unlock from the door but will from the remote then you have a faulty switch.If while outside the car the key turns while in the lock but the door won't lock or unlock then the linkage at the end of the lock is faulty. You'll need to remove the door inside plate to check this.


.

Dec 07, 2011 | 2004 Infiniti FX45

1 Answer

Power door locks won't lock and unlock with the remote.


the battery in the remote may be flat, if it can replaced replace it & see if that solves the problem,if it can't be replaced you will have to buy a new remote from a Audi dealer......hope this helps......cheers.

Sep 17, 2011 | 2001 Audi A4

2 Answers

2003 Monte Carlo SS, FOBS won't unlock doors (new batterries), use key and open the door with the door open FOB will lock and unlock the door, shut the door and the FOB won't lock the doors. After...


If the passkey is messed up, there will be a light on the dash that says security, or have a picture of a car with a lock thru it. If there is no light when the key is turned forward, then its NOT a passkey problem.



tayjoejoe_35.jpgtayjoejoe_36.jpg

Aug 17, 2011 | 2003 Chevrolet Monte Carlo

2 Answers

I have no power to several fuses on 01 ford expedition


Check in the high amp fuse box under the hood as one of those fuses may be blown causing no power to several accessories.

Mar 23, 2011 | 2001 Ford Expedition

Not finding what you are looking for?
1993 Pontiac Grand Am Logo

1,008 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...