Question about Cars & Trucks

2 Answers

How can I get out of this site I found it quite useless but cannot see a simple unsubscribe tab

Site not to my liking and extremely difficult to unsubscribe from even if you sent message back to sender. quite dissapointing for a site that advertises as helping you solve problems

Posted by on

  • yadayada
    yadayada Feb 07, 2012

    Do you mean the site owes you money?

  • joecoolvette
    joecoolvette Feb 08, 2012

    I would like to ask what the problems were, and what was not to your satisfaction.
    Post back in a Comment.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 75,066 Answers

The experts that answer questions here are not employed by Fixya, we work from home or office or in our free time. We experts are not connected to nor have any say over the business end of Fixya so I can't do anmything about your request. I suggest you use the contact menu selection in the menu at the bottom of this web page to ciontact the staff of Fixya and state your request. Once you do that you will be helped within 24 hours (or so i am told)

Posted on Feb 07, 2012

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 3,640 Answers

If you can not delete this page. you can go to system restore, and you can restore it to before putting page on.go back to just before the page problem in restore. this should fix it ! but if you installed anything since then. it will be lost also.

Posted on Feb 07, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I engine swap my 2004 Infiniti g35 motor with a 2006 Mazda3


I would expect such a swap to be extremely difficult, these engines are quite different, have different mounts, different clutch-plates/transmission connections, different plumbing, and different "brain" requirements. While it might be possible, it would likely be far less expensive to fix whatever is wrong than try such a graft.

Dec 02, 2016 | Infiniti Cars & Trucks

1 Answer

Replace rear O2 sensor


It is quite simple, you un-plug the sensor from the harness, usually there is a plastic lock tab you must remove before you can disconnect the plug. Then you will need a special socket specifically made for O2 sensors. They tend to get corroded into the tailpipe so you might need to use a breakover bar to get the old sensor moving, in extreme cases I have had to get a torch to the bung around where the sensor is threaded in. anyway, once you get the old sensor out make sure you use a bit of anti-seize on the threads when you install the new one.

Apr 21, 2013 | 1996 Geo Prizm

1 Answer

Hello... ou! Does anyone know What to remove to replace head gasket on 2003 chevy trailblazer LT 6cyl 3rd Row seat? please, thanks!


I think the reason no one has answered your request is because the process is extremely hard and difficult to explain on a site like this. This type of repair is not recommended for an inexperienced person, especially because of the overhead cam timing mechanism.

Aug 12, 2011 | 2003 Chevrolet Trailblazer Ext

2 Answers

How to change heater core in 2001 chevrolet blazer


Hi:
I have changed out a heater core on a Blazer like yours and while it isn't extremely difficult, it is quite a job, as you need to remove the dash to do so.

If you need some guidance, I would suggest that you spend about $20 and get a subscription to :
www.alldatadiy.com

It helped me on all of the cars that I had, and has step by step instructions, as well as printable diagrams and pictures.

Dec 18, 2009 | 2000 Chevrolet Blazer

2 Answers

How to get to the fuel pump in a 1992 cadillac eldorado


You will have to drop your fuel tank,the pump is inside the tank

Oct 01, 2009 | 1992 Cadillac Eldorado

1 Answer

1990 Toyota 4Runner fan connection broken?


ita the water pump. quite simple to change

Jun 07, 2009 | 1996 Toyota 4Runner

1 Answer

Windshield wipers stuck upright when off


This is a commoon problem with what is called the "Park pawl stop". The tab is most likely bent and needs to be re-aligned, then the wipers need to be re-timed. This re-timing can be a little difficult, although the re-aligning of the tab is failry simple.

TechJK

Apr 02, 2009 | 2005 Chevrolet Monte Carlo

2 Answers

My back hatch won't open, but my door locks still work also my lighter quit working. Any suggestions or solutions?


Have you taken the little red nozzle that comes with WD-40 and stuck it as far in the key slots as far as you can & soak it good? Spray all around buttons too, trying to get it to work in behind it.

Feb 28, 2009 | 1998 Chevrolet Blazer

1 Answer

NEED HELP HOW TO REPLACE FRONT SHOCKS ON HOOD


These are quite simple. The generally fasten with clips both at top and bottom. Replacements are readily available at general auto stores like O'reilly or Checker.

Have someone help, hold up the hood or prop with a sturdy stick. Unclip both top and bottome slip old shock off and slide new one in. Do for both sides.

Let me know if there are further complications that I'm not considering, but usually this is quite simple. I've also found at some stores like Checker, if you as for some help with these things, the nice man will come out and give you a hand.

Regards,

Doug

Nov 15, 2008 | 2001 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...