Question about 2004 Honda Odyssey

2 Answers

Check Engine light with Po131 o2 circuit low voltage sensor 1 bank 1 reading, what does that mean?

Check engine light came on the reading says Po131 o2 circuit low voltage (sensor 1 bank 1). What does this reading mean?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 170 Answers

- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

Replacing the O2 Sensor 1 usually takes care of the problem

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.

Posted on Feb 07, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

I had same problem, just change the fuel pump.
it solve the prolem.
good luck

Posted on Jun 27, 2013

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 15 Answers

SOURCE: Got a check engine light that has been going on

check your O2 sensor and wires other thinks that can cause that problem is when the engine is running in close loop. u should check if the other codes have to do anything with the coolant system. u should fix the other codes first and see if the p0157 go away.

Posted on Jul 05, 2009

  • 2428 Answers

SOURCE: what does o2 sensour heater circuit bank 1 sensor

It means you have a bad oxygen sensorThe way you know witch one is bank 1 is the cloest o2 sensor to the front of the vehicleits in the y pipe likely on the drivers side that would be bank 1 sensor # 1 if the closest one to the front is on the other side then that would be bank 1 sensor # 1

Posted on Nov 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does po131 keep returning after i replaced bank 1 02 sensor ? i clear codes and en about a week code returns data looks good


See causes
P0131 OBD-II Trouble Code Technical Description

Oxygen O2 Sensor Circuit Low Voltage (Bank 1, Sensor 1)
What does that mean? Essentially the same as P0136 and P0137, a P0131 code refers to the first oxygen sensor on Bank 1.
P0131 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 1 is located in front of the catalytic converter.
Symptoms There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.
Causes A code P0131 may mean that one or more of the following has happened:

  • Faulty o2 oxygen sensor
  • Short to voltage on O2 signal circuit
  • High resistance or open on O2 signal circuit
Possible Solutions
  • Replace faulty sensor
  • Repair short, open, or high resistance on o2 signal circuit

Oct 01, 2015 | Cars & Trucks

1 Answer

PO131 PO151 PO154


codes PO131 PO151 PO154 okay. code PO131 - o2 sensor circuit low voltage bank 1 sensor 1. code PO151 - o2 sensor circuit low voltage bank 2 sensor 1. code PO154 - o2 sensor circuit no activity detected bank 2 sensor 1

May 19, 2013 | 2000 Nissan Xterra

1 Answer

P0131 sabb 93 2001 po121 error codes


P0131 - O2 Sensor Circuit Low Voltage Bank 1 Sensor 1 (sensor is before the catalytic converter)

Possible causes- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
P0132 - O2 Sensor Circuit High Voltage Bank 1 Sensor 1
Possible causes- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Front Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

I am not really sure what is going on here with the same O2 sensor giving these lean and rich codes, if nothing else is apparent and the engine runs well you may have a defective O2 sensor.

Sep 13, 2012 | Saab 9 3 Cars & Trucks

1 Answer

Has any one had problems with bosh oxagen sensor not working properly


Hi there:
Are you buy same or OE part replacement according with the Hyundai part number catalogue? This is important. Keep in midn that you need reset or delete all previous code stored in the car computer.


DTC P0131 - Oxygen O2 Sensor Circuit Low Voltage (Bank 1, Sensor 1)
Essentially the same as P0136 and P0137, a P0131 code refers to the first oxygen sensor on Bank 1. P0131 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 1 is located in front of the catalytic converter.


There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.


A code P0131 may mean that one or more of the following has happened:
- Faulty o2 oxygen sensor
- Short to voltage on O2 signal circuit
- High resistance or open on O2 signal circuit


Possible Solutions:
- Replace faulty sensor
- Repair short, open, or high resistance on o2 signal circuit


Now, about DTC P0135 - Oxygen O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 1)


A code P0135 may mean that one or more of the following has happened:
- O2 Heater element resistance is high
- Internal short or open in the heater element
- O2 heater circuit wiring high resistance
- open or short to ground in the wiring harness


Possible Solutions
Repair short or open or high resistance in wiring harness or harness connectors
Replace oxygen sensor (cannot repair open or short that occurs internally to sensor)


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 17, 2012 | Cars & Trucks

1 Answer

Fault code 151


We guess DTC P0151... essentially the same as P0136 and P0137 and P0131, a P0151 code refers to the first oxygen sensor on Bank 2 . P0151 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 2 Sensor 1 is located in front of the catalytic converter.

There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.

A code P0151 may mean that one or more of the following has happened:
Faulty o2 oxygen sensor
Short to voltage on O2 signal circuit
High resistance or open on O2 signal circuit

Possible Solutions:
Replace faulty sensor
Repair short, open, or high resistance on o2 signal circuit

Sep 07, 2011 | BMW X5 Series Cars & Trucks

2 Answers

Check engine light low voltage o2 sensor 04 chevy ventura


your code must be P0131, a P0131 code refers to the first oxygen sensor on Bank 1. P0131 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 1 is located in front of the catalytic converter.
The solution is you can:
1.Replace faulty sensor.
2.Repair short, open, or high resistance on o2 signal circuit. FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook

Jul 02, 2011 | 2004 Chevrolet Venture Passanger

1 Answer

I have code p0137 coming up on my 2003 jeep grand cherokee laredo what does the code mean?


P0137 - Oxygen O2 Sensor Circuit Low Voltage (Bank 1, Sensor 2)

Essentially the same as P0136, P0137 refers to the second oxygen sensor on Bank 1. P0137 means the O2 oxygen sensor's voltage remained low for longer than 2 minutes. This, is interpreted by the ECM as a low voltage condition and sets the MIL. Bank 1 Sensor 2 is located to the rear of the catalytic converter and should produce an output signal relative to oxygen storage capacity of the catalytic converter. This rear (sensor 2) sensor is less active than the signal produced by the front sensor. However, if the ECM senses the sensor is inactive, this code will set.

Symptoms: There may be no visible symptoms to the driver, other than the MIL (Check Engine / Service Engine Soon) illumination.

Causes: A code P0137 may mean that one or more of the following has happened:
* Faulty o2 sensor Exhaust leak near the rear sensor
* Plugged catalyst
* Short to voltage on O2 signal circuit
* High resistance or open on O2 signal circuit

Possible Solutions:
* Replace faulty sensor
* Repair exhaust leak near the rear sensor
* Check for restriction in catalyst and replace as necessary
* Repair short, open, or high resistance on o2 signal circuit

Hpe hti shelps (remember comment and rated this).

Jul 26, 2010 | 2003 Jeep Grand Cherokee

2 Answers

PO131 and PO 151


P0131=O2 Sensor Circuit Low Voltage Bank 1 Sensor 1
P0151=O2 Sensor Circuit Low Voltage Bank 2 Sensor 1
Marc,
this shows that the oxygen sensor on the left exhaust pipe before converter is bad,
And the front oxygen sensor on the right exhaust infront of converter is bad.

Dec 09, 2009 | 2000 Chevrolet Blazer

4 Answers

Code PO131


Code PO131 is O2 sensor circuit low voltage , bank 1, sensor 1. That sensor I would say is the one in the exhaust manifold. I would check voltage to the sensor from the computer. If the voltage is not 5 volts, then it could be a computer problem or a wiring problem. I have seen factory wiring and connectors give a voltage problem. Check for a damaged or burnt, pinched wire. You need to know for sure that the voltage is correct to the sensor. Intermittent problems are hard to trace , but patience and knowledge helps.

Mar 11, 2009 | 1999 Honda Civic

Not finding what you are looking for?
2004 Honda Odyssey Logo

2,185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...