Question about Cars & Trucks

1 Answer

My windscreen washer won't work and there is no noise from the motor.

Posted by on

  • Robert Borland Feb 08, 2012

    Sorry about that, its a Mitsubishi Delica L400 2.8 Diesl, L plate. Hope this helps.


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 5,332 Answers

Normally they are fed power off the same fuse as the wipers. If I new the Year, make, model, and engine size I wouldbe able to help you better!

Posted on Feb 08, 2012

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

SOURCE: Windscreen Washer

If it is the same as some other Chevrolets they have 2 pumps attached to the side of the washer bottle. 1 for rear and 1 for front windscreen

Posted on Jul 31, 2008

  • 409 Answers

SOURCE: Windscreen washer problem

Go and invest in a 12 volt test light. They can be purchased at any parts store. Attach alligator clip of light to a good (any) ground. Have someone activate the washer pump while you pierce the wire with the ice pick end of the test light. One wire is the ground the other is the 12 volt feed to the pump. The ground wire will be black or brown. You might want to just check both wires. If voltage is present the pump motor is bad and will need to be replaced. If there is no voltage you have an open circuit between the fuse and pump motor. Run the test first and let me know what you find.

Posted on Dec 29, 2008

  • 29 Answers

SOURCE: windscreen washer not working - honda ascot innova 1993

the motor is at the bottom of the bottle there should be a couple of screws that you will have to remove and it should then be able to pull it out to replace to motor/

Posted on Mar 06, 2009

  • 490 Answers

SOURCE: Hyundai Santa Fe Windscreen Washer Motor Fault

try taking a pin and cleaning the holes on the squirters and if that does not work check the washer pump it is located on the washer fluid tank

Posted on Apr 17, 2009

SOURCE: windscreen washer not working

The windscreen washer pump is in the washer-fluid tank.


Posted on Sep 12, 2009

Testimonial: "Thanks for the advice, is this easy to get too?"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

Front windscreen wipers stopped working

turn the wipers on fully and try tapping on the wiper motor, sometimes the brushes freeze...

Feb 11, 2013 | 2006 Hyundai Trajet 2.0

1 Answer

Would my windscreen water pump have a dedicated fuse that may have blown?

sorry to hear about your back, back problems and working on cars are never a great combo. This is a simple fix, if you can purchase a simple voltage meter it will help even more. if there is 12v going to the pump then its The Pump. since you say there are no noises coming from the washer jug then that eliminates a broken/disconnected tube. If you think your fuse is blown, well thats an easy fix. But something caused it. So if the fuse is blown look for a "ground fault". Explenation; everything inand on your car must be grounded to the chasis, when you loose that connetion this Will Not blow your fuse, only a corroded/poor connection. This causes heat and heat will pop fuses and sometimes take out the component you are working on. recap: 1. buy a 12v meter - this is your diagnostics tool. 2. check the fuse - if blown/popped do not replace until you check the connection on the motor. if there is no corrosion your good to put the fuse in. 3. if the fuse isnt popped, your meter can test for power to the motor. if power is there the motor is bad. replace it and then check your tubing.
Good luck

Sep 20, 2012 | Cars & Trucks

1 Answer

My windscreen washer won't work. There is no noise from the motor. What should I check first.

Normally they are fed power off the same fuse as the wipers. If I new the Year, make, model, and engine size I wouldbe able to help you better!

Feb 07, 2012 | Cars & Trucks

2 Answers

Windscreen washers stopped working. all fuses ok,wipers working ok.front & back washers not working

Hi, First check that you have wash liquid in tank. second make sure that it will not freeze by putting alcohol in your mix of water and soap. You can buy it already mixed at most service stations. Check pump for corosion on contacts.
Good luck.

Dec 15, 2011 | Honda Cars & Trucks

1 Answer

Windscreen washer bottle is full , When i press the arm to activate the washer no noise is heard and nothing happens.

If no noise is heard the pump is not working, this is most likely to be a blown fuse. check fuse under bonnet usually fuse number 2 which is 10 amp (red).

Jan 13, 2011 | 2005 Jaguar S-Type

1 Answer

2001 S Type Jaguar Sport windscreen washers don't work

make sure hoses are attached to jets somtimes blow off if there has been icy weather

Feb 26, 2010 | 2005 Jaguar S-Type

4 Answers

Windscreen washer does not work on renault megane coupe sports motor works but no fluid comes out do not want to take washer bottle out any ideas please

i Just fixed a problem with a renault megan washer motor. If the motor makes a noise but is not pumping any water & the jets@ the windscreen are clear, then pull the suqirter motor out off the washer bottle( the bottle stays in place ) it just pulls out from underneith the bottom stone tray& may need to remove bottom bolt, inner lower wheeel arch. Right Now where the black & white squirter come out of the motor gentlywith a screw driver pop these off together. ( test motor again) ( put in water ) Then with Snap ring plires & part the white & black outlets apart & you will find a rubber seal that looks like it must of grown. When it grows it blocks both ports off. you need to shorten the rubber & keep it flat as remember its job seems to block off either the front or rear port. if it not a good finish you may get water coming out of the front & the rear ifeg your working the front squirters

Dec 04, 2009 | 1986 Renault Sport

1 Answer

Windscreen washer not working - honda ascot innova 1993

the motor is at the bottom of the bottle there should be a couple of screws that you will have to remove and it should then be able to pull it out to replace to motor/

Mar 04, 2009 | 1996 Ford Taurus

2 Answers

Windscreen washer wont work in my 207 (56 plate)


Jan 04, 2009 | 2006 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides