Question about 2000 GMC Jimmy

1 Answer

Cant remove ignition key

Dash controls do not work

Posted by on

  • scott Feb 09, 2012

    no it is not the ac controlls it is the speedometer odometer and all the other gages quit working and we also cant remove the key

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • GMC Master
  • 691 Answers

Squirt something like WD-40 into the key slot. Make sure shifter is fully in park and NO pressure from the steering gear on the column ie. front tire against curb. Last resort is to lightly tap the key into the slot with a small hammer.

As for dash controls...I assume you are talking about AC/Heat controls, if so, you have a big vacuum leak, under the hood most likely. Start at the vacuum can or ball, and check all vacuum lines attached to the intake manifold and trace them from one end to the other.

Posted on Feb 08, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

On a chevy traverse i cant get the windows to work. i cant get key out of ignition, and right rear blinker doesnt work


Fuse under the right passenger dash. Fifth up on the right (blue 15 amp). It is called BCK/UP/STOP. All the same symptoms short in wiring harness for the trailer package caused the windows not to function, the right rear turn signal had no power, and the key was stuck in the ignition.
7_17_2017_9_57_25_pm.jpg

Dec 02, 2012 | Cars & Trucks

1 Answer

Dash dead ,turn key nothing happens,no click,battery good,ignition switch is new,starter turns over when jumped with screwdriver,lights,horn,acc.work.


It there is a problem with the dash, there is probably no power to the anti theft module in your ignition. The car is in anti theft mode due to not being able to read your key transponder. Basically if it cant read the key, it thinks its being stolen. Either fix the dash lights, or fully bypass the security. All the security info you need is on here including how to bypass it.
http://vatspasslockpasskeysecurityhelp.yolasite.com/

May 03, 2011 | 2000 Chevrolet Cavalier

1 Answer

Cant start. the power to the dash stays on even


Sounds like a bad starter switch at the column there. May need to replace that.

Mar 16, 2010 | 2001 Ford Taurus

2 Answers

Seems like the car is staying in "ACC" (accesory key position)


BFC that body function controller. BFC batt fuse controls .the body function controller .its part of the PCM.the BFC controls anti theft system. your interior lights -drl lights- radio -door locks.if your check engine light is on take it to dealership.because your BFC and PCM works together. your car could shut off. that unsafe.when you on a busy highway.you have electrical problem.not a home fix.

Jun 27, 2009 | 1999 Oldsmobile Alero

2 Answers

Key Stuck In Ignition, 1995 Chevrolet Camaro


well you kn ow the b*tch likes to **** no seriously though try moving the stearing wheel left and right

Jun 02, 2009 | 1995 Chevrolet Camaro

2 Answers

I am seeking location of ignition switch wiring on 2000 olds intrigue.  I have under dash removed.


Disconnect Car Battery
I replaced the ignition switch in my wifes 2000 intrigue. (ignition mounted in front dash). I had to take off the knee bump trim and the trim around the instrument housing and remove the instrument cluster. Leave it connected and just lay it on the dash. You also need to remove the radio to get to one of the screws that hold the ignition switch module. Once you get that loose you can pull it out so you can disconnect the wires going to it.
If you need to replace the ignition module insert the key and turn to accessories, there is a small metal button to push in, then your key and the lock part will fall out to install into your knew ignition module. At that time you can also remove the cruise control cable.
I am not a mechanic and the whole process only took me an hour or so.
I replaced my ignition module to fix the heater and AC operation. It also fixed the cruise control that hadn't worked for a year.

Jan 24, 2009 | 2000 Oldsmobile Intrigue

1 Answer

I cant remove my key from the ignotion 04-05 wrx sti


You are going to have to have you ignition tumbler replaced. (Talk about insult to injury!) It sounds like Repo-man slammed in a new tumbler to snatch your rex and didn't quite get it in right.
Good luck!

Jan 05, 2009 | 2007 Subaru Impreza WRX STI Limited Sedan

1 Answer

A/c compressor not engaging.


The contacts in the ignition key switch have been known to not make contact when the ignition is turned on. Remove the switch contacts. It can be removed from the key lock. Spray some contact cleaner into the contact cluster through some small openings, reassemble the switch and work the key back and forth to clean the contacts. Then see if the AC clutch gets voltage. Note that there is a little light in the AC pushbutton on the AC controls. The light some come on if the circuit to the clutch is complete

Jul 07, 2008 | 2005 Kia Spectra

Not finding what you are looking for?
2000 GMC Jimmy Logo

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...