Question about 2000 Ford Expedition

Open Question

Data link connector not working in 2000 ford exployer

No power to connector

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fixincars
  • 335 Answers

SOURCE: ford exployer 2000 4.0 eng

Do a mechanical oil pressure test to confirm the operation of the oil pump and if its good change the OIL pressure sending unit

Posted on Aug 27, 2008

Ad
michigan man
  • 3533 Answers

SOURCE: can not locate data link connector

for the most part its under the dash on the driver side and sometimes its under the hood on the driver side you can also stop by your local Ford dealership and they be able to print you off pictures and diagrams showing you where it is located wish you the best of luck Michigan Man.

Posted on Dec 03, 2009

saailer
  • 1868 Answers

SOURCE: 2000 FORD EXPLOYER: Power windows,

Hello! In the Central Junction Box is fuse # 26 (10A) which powers the Battery Saver Relay...This relay, in-turn, controls the Power Windows, Electronic Shift Module, Glove compartment Light and Cargo light...If the fuse is good, suspect the relay...The Interior Lamp Relay and the Battery Saver Relay are the same...Either one could be at fault if the fuse proves to be good...See photo of relay below...Relay module Above right of gas pedal or lower left of AC/Heater/radio. It is an ugly place (Behind the center console)...

This is a documented fault if fuse #26 keeps blowing...The wiring on the rear of the relay module has a history of shorted and burnt connections on the socket of the Battery Saver Relay...Keep me posted...................Guru............Saailer



saailer_165.jpgSTANDARD MOTOR PRODUCTS Part # RY612...Cost under $10

Posted on Aug 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have no high beam headlight low works fine have already replace mili switch 2000 ford exployer


Have you checked the fuses and the bulbs to make sure they are ok and check that you have a live feed when switched to main beam .

Feb 02, 2015 | 2000 Ford Explorer

1 Answer

The#34 fuse is the instrument cluster,corm,data link connector,securilock transceiver module and it blows Everytime I try to start the car.


Two things. You have a power wire to the cluster that is shorted to ground or the cluster itself is shorted.

Nov 13, 2014 | 2000 Ford Mustang

1 Answer

Where is the fuel filter


On my 2000 ford exployer the fuel filter is under the car it's self driver side up towards the frame of the car which by the way as far as I am concerned is a real bad place for it hopes this helps

Jan 19, 2013 | 2000 Ford Explorer

1 Answer

2000 ford exployer 4.0 pcv valve location


should be in valve cover on driver side top in middle

Sep 09, 2012 | 2000 Ford Explorer

1 Answer

Deville 2000 DLC does not work


Typically the data link connector gets its power from the cigar fuse. On your vehicle there is a fuse in the underhood fuse block labeled ALDL (assembly line data link).

Aug 23, 2012 | Cadillac DeVille Cars & Trucks

1 Answer

2000 ford exployer 4.0 ,if it isn't started everyday it doesn't want to start


hello you might consider changing your spark plugs these are probably wet gas fouled once you have changed them be sure your battery is charged properly now you suv should start

Jan 09, 2011 | 2000 Ford Expedition

1 Answer

No obd signal


check fuse #17 in the passenger compartment fuse box, it is the power supply for the data link connector

Fuse 17 a 20A (Cigar Lighter, OBD2 Data Link
Connector)

Sep 29, 2010 | 2001 Ford Explorer Sport

1 Answer

Is there a fuse if there is no power to the computer hookup under dash to enter new key code on a 2000 ford expedition


Usually if your DLC (Data Link Connector) is not communicating you should check for a blown fuse on the cigarette lighter circuit, should be a blue 15amp fuse. Also check for any pennies or other foreign matter in your cig. lighter sockets or unplug your accessory charger that is in there. I see that all the time. I also see some DLC's that just don't communicate due to a wiring problem. But check the simple things first.

Sep 23, 2010 | 2000 Ford Expedition

1 Answer

I NEED A PRICE FOR A NEW ENGIN FOR MY 2000 FORD EXPLOYER 4.0 ENGIN


average price for a good used motor installed is around 1100.00

Apr 24, 2009 | 2000 Ford Explorer

1 Answer

Ford exployer 2000 4.0 eng my oil gauge works when it wants to is it the sending unit or the oil pump going


Do a mechanical oil pressure test to confirm the operation of the oil pump and if its good change the OIL pressure sending unit

Aug 26, 2008 | Ford Explorer Cars & Trucks

Not finding what you are looking for?
2000 Ford Expedition Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...