Question about Hyundai Motor 2004 Sonata

Open Question

How do i change a water pump on a 2004 hyundai sonata six cynlinder

Posted by on

  • 1 more comment 
  • david gomez Feb 07, 2012

    come on why don't I get a answer

  • david gomez Feb 07, 2012

    I want to replace a water pump

  • daleverhagen
    daleverhagen Feb 14, 2012

    david i just replaced the timing belt , water pump , crank shaft sensor, and the tentioner for the timing belt which it is recomemded you replace all of these while you are at it and it is a real *****, you better have a very good set of tools, socket sets with extentions and open end wrenches, a air rachet, a harmonic balance puller, they say just remove the crank shaft pulley, but it is not nearly that easy, you would start by removing the coolant resivoir, and removing the top engine mount on the passenger side then you must remove serpenteen belt and all pulleys that prevent you from removing the timing belt covers both top and bottom, this will include the harmonic balance pulley and the timing belt to get to that you will need to remove the tire on the front passenger side, and you will need to remove the engine mounting essembly from the engine allong with the pulley attached then you will have to put a jack with a piece of wood on top of it under the oil pan and jack the engine up high enough to remove the water pump out after you remove the bolts and put the new one in and the crank shaft senson is a real ***** to find but it is on the drivers side of the engine near the top but again it is very difficult to see and even more difficult to get to without removing a buncb of delicate wires and hoses you better be very determined because this is a major job, good luck!!!

×

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 69 Answers

SOURCE: Removal of Radio in 2004 Hyundai Sonata

Remove the facia plate, and remove the 4 screws that hold the radio in place. It's actually one of the simplest cars you can do.

Posted on May 27, 2009

  • 393 Answers

SOURCE: replacing rear wheel bearings on 1999 hyundai sonata

  1. for drum brakes with sealed hub(all one piece) remove lug nuts and wheel.
  2. spray penetrating oil around studs if there is a big phillips head screw visible remove it with impact driver/if not use big ballpeen hammer ,tap on flat of drum near studs(becareful not to hit them) until drum loosens(your creating a shockwave to loosen rust)
  3. once drum is off there are 4-bolts coming in from behind backing plate, remove them then hub should be able to be removed w/a little persuation from hammer.
with out sealed hub ,
  1. remove wheel
  2. remove dust cap,cotterpin,star washer(if equipped) do not re use cotter pin
  3. remove nut then washer, wiggle brake drum and front bearing will come out.
  4. put nut on shaft tighten 2-3 turns grab drum by sides and pull towards you this should remove drum leaving inner bearing/seal on shaft
  5. to replace reverse procedure making sure to pack new bearings w/grease(take drum and use long punch to remove bearing races, use race/seal installer to install new races
with disk brakes

  1. remove wheel
  2. remove caliper/bracket
  3. remove rotor
  4. remove 4-bolts from behind,tap old hub out
  5. reverse procedure



Posted on Nov 15, 2008

  • 10 Answers

SOURCE: disarm alarm on a 2004 sonata

If you use your keyfob to lock the doors, it will activate the alarm, and you will need to unlock with the keyfob. If you lock the doors with the lock button on the inside of the door, it should not activate the alarm.

Posted on Dec 22, 2009

webbird69
  • 6 Answers

SOURCE: Just changed the Timing Belt on my 2004 Hyundai

Did you line up the marks on all the gears properly?Sounds like the balance shaft mark is off, or the valves got bent and you have a missfire. This is an interference engine

Posted on Dec 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it start, run, die?


hi, you can solve your problem from the reliable store with a service manual
http://www.reliable-store.com/products/2004-hyundai-sonata-workshop-repair-service-manual-pdf-download

Nov 29, 2015 | 2004 Hyundai Sonata

1 Answer

Where is the fuel pump cut off switch for a 04 hyundai sonata


The only manufacturer that uses a resetable fuel pump inertia switch is Ford.

What problem are you having?

Jan 22, 2013 | Hyundai Motor 2004 Sonata

1 Answer

Need a manual to change water pump on hyundai sonata 1994 please ta


I found this site which I am sure help you -

www.youtube.com/watch?v=mo3YHrEKcZc

hope this will help

Feb 08, 2012 | Hyundai Cars & Trucks

1 Answer

How to change a timing belt, replace and install new one for 1999 Hyundai Sonata, six cylinder engine


wouldn't reccomend trying to change it if you have never done one before, it could cost you a helluva lot more.

Sep 07, 2010 | 1999 Hyundai Sonata

1 Answer

How do i change the water pump on 2004 sonata 4 cylinder?


Hyundai Car 1999-05 - Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Drain the cooling system.
  3. Remove or disconnect the following:
    Negative battery cable Accessory drive belts Water pump pulley Timing belt, tensioner and idler pulley Water pump
To install:
  1. Clean all mating surfaces of any residual gasket material.
  2. Install or connect the following:
    Water pump with a new gasket and torque the bolts to 16 ft. lbs. (22 Nm) Tensioner and timing belt and idler pulley Water pump pulley and drive belts Negative battery cable
  3. Fill the cooling system to the proper level.
  4. Start the vehicle, check for leaks and repair if necessary.
c84998b.jpg

Fig. Water pump assembly-1.8L and 2.0L engines

9eb0fb7.jpg

Fig. Exploded view of the water pump assembly and related components-2.0L engines


Hope this help; TY for using Fixya (remember comment and rated this).

Mar 31, 2010 | Hyundai Motor 2004 Sonata

1 Answer

Hyundai sonata 2004 2.4l common problems?


Water pump, thermostat belts and hoses. One these are the cause of most traded cars.

Feb 14, 2010 | Hyundai Motor 2004 Sonata

1 Answer

2002 Hyundai Sonata have a timing belt or chain


timing belt and yes the belt and tensioner needs changed every 60k and if its a 4cyl. the balance belt also needs replaced

Aug 18, 2009 | Hyundai Motor 2004 Sonata

Not finding what you are looking for?
Hyundai Motor 2004 Sonata Logo

Related Topics:

222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...