Question about 2003 Toyota MR2 Spyder

Open Question

Toyota MR2 Spyder Starter - 2003 Toyota MR2 Spyder

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1861 Answers

SOURCE: can not find starter in my 1988 Toyota Mr2

Look under the vehicle, between the engine & the transmission. You can't see it from on top.

Posted on Oct 14, 2008

Ad
  • 1 Answer

SOURCE: 2003 MR2 will not idle

I had the same problem. My check engine light was on. Took it to the dealer and they checked the code. It was the throttle control motor failure. The good news is I got the wiring wet and that seem to be the problem. They reset the check engine light and it runs fine now. Bad news is if I had to get the motor replaced they said it would be about $1300.00 I hope things work out for you.

Posted on Oct 18, 2008

  • 341 Answers

SOURCE: 2003 toyota mr2 spyder 5 speed transmission grinding noise

Here is what is going on. When you push in the clutch pedal you remove the connection between the engine and the transmission. At this time all the parts in the transmission stop rotating.Since the only parts in the transmission that can rotate without moving the car are the input parts we can safely assume that the noise can only be from there.This can be a transmission input bearing. Worn Synchro mechanism (allows the transmission to shift without grinding the gears)Low fluid in the tranny. Or a bad clutch component. Top off or change the fluid. If it still makes the noise you need to take it to a tranny shop.

Posted on Nov 30, 2008

  • 2 Answers

SOURCE: toyota mr2 spyder repair manual

I got mine from a company called www.electronicmanuals. i think, you can buy it as a download or on a C.D.

Posted on Mar 25, 2009

ewashmidas
  • 362 Answers

SOURCE: check engine light flash then steady

Your vehicle’s computer system has self-testing capability. When the computer senses that there is a problem with one of the components or sensors it stores the correspondent trouble code(s) in its memory and lights up the "Check Engine" or "Service Engine Soon" light to tell you that there is a problem and you need to diagnosed and repaired it. The list of possible codes number in the hundreds. The code itself doesn't tell exactly what component is defective - it only indicates where to look, or what engine parameter is out of normal range. You or a technician will have to perform further testing to pinpoint cause and the proper repair. If the light is flashing there is a severe failure of the emission-control system that is causing the engine to misfire to the point that the catalytic converter is damaged each time the Check Engine Light flashes. Even if you reset the light, if the underlying problem is not addressed it will come back on.

Posted on Apr 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the ecu located in 2000 Toyota MR2 Spyder?


Hint: Sometimes when you go to the dealer and look at the part, they can show you on the screen the diagram where it goes!

Oct 07, 2012 | 2000 Toyota MR2 Spyder

1 Answer

2000 Toyota MR2 Spyder Pipe (from muffler) connected to 2 flex pipes is sheared off at connection to flex pipe. need schematic and how can this be repaired


Replace the entire section before and after the flex. Be sure to look into excessive engine movement, that may have caused this failure. Welds will fail again, quickly.

Sep 03, 2010 | 2000 Toyota MR2 Spyder

2 Answers

Manual for a toyota mr2


Here are electrical and Repair manual
http://www.cannell.co.uk/Workshop_Manual_Toyota/MR2_1991_REPAIRMANUAL.PDF http://www.cannell.co.uk/Workshop_Manual_Toyota/MR2_ELECTRICALWIRINGDIAGRAMS.PDF

Jun 22, 2010 | 2004 Toyota MR2

1 Answer

2002 toyota mr2 firing order


should be 1342 but some vehicles use 1243

Jun 12, 2010 | 2002 Toyota MR2 Spyder

1 Answer

My mr2 won't start. no accessory lights on.


The positive which is normally red goes to the starter solenoid. The negative or ground (black wire) bolt to the engine and body.

Jul 02, 2009 | 2002 Toyota MR2 Spyder

3 Answers

Mr2 transmission


use only OEM Toyota trans fluid. If there is one lesson I learned with my MR2, its that Toyotas own trans fluid is the best. Yes, its a few dollars more, use it anyway.

As for your top, there is a product called Amazing Roll off. Its for boat canvases and its simply the best thing i've ever used. try it, you wont be disappointed.

Jun 19, 2009 | 2003 Toyota MR2 Spyder

1 Answer

Toyota mr2 spyder repair manual


I got mine from a company called www.electronicmanuals. i think, you can buy it as a download or on a C.D.

Mar 21, 2009 | 2000 Toyota MR2 Spyder

Not finding what you are looking for?
2003 Toyota MR2 Spyder Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...