Question about 2006 Lexus Es 330

1 Answer

Maintenance light How do I turn off the maintenance light on my car? I got an oil change (not from the dealer) and they did not reset the maintenance light.

Posted by on

  • Storm VanFlein-Hage
    Storm VanFlein-Hage May 11, 2010

    what type of car, does it have a computer, like with compass and the settings? Where is it telling you that maintenance is needed, where is the light?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 47 Answers

1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car.
2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting).
3. Turn the key to OFF.
4. Place your finger back on the odometer button, press and hold. At the same time, turn the key back to "On".
5. Hold the odometer button in until the MAINT REQD light goes out...should take about 8-10 seconds.

Posted on Jan 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

2 Answers

My maintenance required light came on and stays on. since maintenance required is such a broad subject, i was wondering how i can determine what may be causing this problem is it possible that it's the...


normally if its going to be an O2 sensor,, the check engine light would come on, not the maintenance light, I don't know if your car has 2 different ones, My 2000 civic does though,, normally a maint light comes on if its time for an oil change , etc... rest the light,, heres how you do that you use the button that resets your trip odometer to reset the maintenance light.

with the key in the ignition but not turned on, hold the trip reset button in with one hand. then, while holding the button in, turn the ignition key to the ON position so that the lights on the dash come on.

continue to hold the reset button in and watch the maintenance light. it will take about 15 seconds for the light to go out

when the light goes out, turn the ignition key OFF and then release the trip reset button.

your light will be reset and come on in about another 5000 miles to remind you of the next service

Sep 08, 2011 | 2004 Honda Civic

3 Answers

The 'Maintenance Required' light flashes on my


this is just your maintence minder. the reset procedure should be in your owners manual. the vehicle calculates when its due for an oil change and turns the light on but it should be reset every oil change if its on or not. you can can your local acura/honda dealer and they can explain how to reset

Nov 02, 2009 | 2001 Acura MDX

3 Answers

How do you reset change oil light on mitsubishi outlander


Turn the key off.

Press the "Info" button on the left of the dash cluster until your maintenance miles/months screen is displayed.

Press and hold the "info" button until the maintenance screen begins flashing.

Release the "info" button and then push and hold it it for one second.

Your Maintenance intervals should reset to +6 months and +7500 miles since the last interval amount.

Note that if you have not reset it for more than one interval, you may need to do it more than once. If you have not done it for many intervals, you may need to have it reset with the scantool at a dealer, as I have run into a handful of vehicles that the oil change reminder locked up after 3-4 "intervals" were skipped/not reset.


Sep 11, 2009 | 2007 Mitsubishi Outlander XLS

2 Answers

Maintence required on red


Maintenance Required is a light that comes on after a predetermined number of miles. For example, if the maintenance schedule Honda set for the car calls for an oil change at 3000 miles, a new fan belt at 6000 miles, and another oil change at 9000 miles, then the maintenance required light will come on every 3000 miles and stay on until it is reset by the dealer. Some people, especially those that do their own regular maintenance but don't have a way to reset the light themselves, find this an annoyance. But others find it useful and take their cars in to the dealer every time the light comes on, and they rest assured that all of the regular maintenance is always done on time.

What this light does NOT do however is signal that there is anything immanently wrong with your car. It is not a "Check Engine" light (that's the one you should worry about if it ever comes on), but merely a reminder for you to do preventative maintenance. That doesn't mean you should *ignore* it, per se, as you want to make sure you have your car on some kind of maintenance schedule, even if yours is not as strict as Honda's. But there is no need to panic.

Aug 25, 2009 | 1992 Honda Accord

1 Answer

Maintance light blinks 11 times when car is on


Maintenance required indicator reminds you that it is time to take your vehicle in for scheduled maintenance.It is tell you that you need to get an oil change and all of you fluids to be checked and serviced. After the recommended time or mileage period the light will come on telling you it is time for your car to be serviced for whatever problems there might be. The dealer will reset the indicator after completeing the scheduled maintenance. You can reset the indicator yourself by Turning off the engine. press and hold the select/reset button in the instrument panell, then turn the ignition swithch ON(II). Hold the button for about ten seconds, until the indicator resets. If this doesn't stop the maintenance light from coming on then you need to take it to a honda dealer.

Jul 16, 2009 | 1998 Honda Accord

3 Answers

How can the maintenance required light be reset following an oil change?


Here's how you reset your oil maintenance light.

To reset the light,
Turn the ignition on
Make sure the odometer displays "ODO"
1.Turn the key off
2.Press and hold down the same button you use to get to "ODO"
3.Turn the key back to ON ( while still holding down the button)
4.Hold the button in until all the flashing lines on the odometer go away and the bunch of "000000" shows up and the maint reset light will turn off.
Your'e done.

If this doesn't work, you would have to try it on "trip A" instead of "ODO".

Jun 02, 2009 | 2006 Toyota Camry

2 Answers

How to reset 2006 toyota sequoia after change oil


Previous Post dead wrong...

Turn ignition to "ON" position. Make sure odometer is on trip setting not on total vehicle mileage setting.

Turn ignition OFF

Push and hold odometer button while turning ignition to "ON" position. HOld for about 4-5 seconds until maintenance light goes off. Turn ignition OFF. Start up vehicle. There should be no more maintanence light.

Apr 18, 2009 | Toyota Sequoia Cars & Trucks

1 Answer

Chevrolet Express 1500 Maintenance 1 & 2


when you do a oil change you need to reset or light will come . to do this you turn on key hit gas pedal 3 times really fast

Oct 19, 2008 | 2007 Chevrolet Express Passenger

Not finding what you are looking for?
Cars & Trucks Logo

557 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...