Hi there: check this for...
Model ESCORT ZX2
Engine L4 2.0L 1989cc 121ci GAS FI N 3
Hope this helps; also keep in mind that your feedback
is important and
I`ll appreciate your time and consideration if you leave some
testimonial comment about this answer.
Thank you for using FixYa, have a nice day.
SOURCE: ford 2002 taurus
look on the back of the sleeve the serpentine belt came in...it should have multiple diagrams showing the setup you just have to choose the one for your engine. to replace unbolt the back of the alternator remove the belt and work backwards to install belt.
you have to pull on the belt to get give from the tensioner unless you have the required tool... it makes it A LOT easier but nothing a little elbow grease cannot handle
SOURCE: 02 Ford Expedition need diagram change serpentine belt
log itno autozone.com
they have free tech solutions and diagrams...........
SOURCE: 2002 ford tarus serpentine belt diagram
My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/taurus/2002_ford_taurus_drive_belt_routing_diagram.htm
SOURCE: serpentine belt diagram
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/escape/2002_ford_escape_drive_belt_routing_diagram.htm
SOURCE: i need timing belt digrams for a 94 ford probe gt ...
Align the engine timing marks as follows, then install the belt.
Once the belt is routed, as shown below, install the indicated pulley last, then pull the pin out of the hydrualic-tensioner.
Below is the master help link
provided to go through belt routing diagram:---Timing belt, drive belt,
serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all
types of car models?
Click the link below: ----
http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.
60 views
Usually answered in minutes!
×