Question about 2005 Nissan Maxima

Open Question

Need to fix 2005 nissan maxima p0780 shift code

Fix problem maybe with shifter kit

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 383 Answers

SOURCE: 2005 Nissan Maxima SE Fog light replacement

jorgeva: on the driver's side to gain access, you must remove the air cleaner assembly. At that point, you can see the back of the light which has a plastic cap. Rotate this "counter clockwise" and you can pull it back from the back of the lamp housing. From there you will see how the bulb it self is plugged in, which is obvious. Unplug it. There is a "spring "like latch retainer to hold the bulb in place. Unlatch it, remove the bulb and install the new bulb.
CAUTION!!!!!!! DO NOT TOUCH THE GLASS AREA OF THE NEW BULB! Only handle the rear section. Reassemble in the reverse order.
The right side will require the removal of the windshield washer tank.
I trust this will have answered your question. If you would, let me or FIXYA know if I have solved your problem......

Posted on Apr 18, 2009

  • 20 Answers

SOURCE: 2005 Nissan Maxima How do we change a brakelight

I believe you should pop the trunk and look where the light would be on the outside and pull the carpeting off.
well first unscrew the screws holding the carpet down then look in there.
pull out the headlight assembly and take out bulb and put new one in

Posted on Jul 06, 2009

Mechanic65
  • 142 Answers

SOURCE: How do I fix my Nissan Maxima 1991's shift gear?

Do you hear a click near shifter when ignition is on and you step on brake? if not you have a Shifter Interlock problem. you ennd to check fuses for a possible blown fuse. If it is not a fuse it could be the Switch or solonoid. If you hear the click and can not shift, can you press on shifter lock button? if not Shifter Lock is malfunctioning. It must be taken apart to diagnose what it is exactly. If you CAN push Button then it could be the shift cable itself is frozen, and needs replaceing

Posted on Oct 09, 2009

emissionwiz
  • 75822 Answers

SOURCE: replace transmission in 2005 nissan maxima

ABOUT 4-6 HOURS OF LABOR, DEPENDS ON WERE U HAVE IT DONE..

Posted on Nov 10, 2009

Testimonial: "Thank you, thought it was about 7."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Nissan maxima code po780 2005


code p 0780 refers to gear selection--shift malfunction===causes --wiring --TR( transmission range) sensor--shift solenoids ---transmission mechanical fault
take it to an accredited auto transmission specialist shop for an exact diagnosis of the fault
I seriously doubt that you have a transmission box mechanical fault so get a second opinion if a replacement transmission is suggested

Sep 09, 2016 | Nissan Maxima Cars & Trucks

1 Answer

1998 nissan frintier 5 speed standard shifter has a lot of slop can i fix it


The shift handle has a plastic bushing and metallic locks that holds it firmly and allow you shift the gears smoothly, so when this bushing or the has warned out, so the shift handle will develop a lot of slop, you may need to consider replacing it that kit.

Feb 20, 2015 | 1998 Nissan Frontier

1 Answer

Honda 2005 crv engine code P0780 what does that mean?


shift control system fault
Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shifting solenoid valve
- Shifting solenoid valve harness is open or shorted
- Shifting solenoid valve circuit poor electrical connection


Read more: http://engine-codes.com/p0780_honda.html#ixzz3EEnWkTOq

Sep 24, 2014 | Honda CRV Cars & Trucks

1 Answer

How to fix the automatic transaxle malfunction


Possible causes of OBD code P0780
- Low transmission fluid level - Dirty transmission fluid - Faulty shifting solenoid valve - Shifting solenoid valve harness or connectors - Shifting solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0780 codes is detected when no rotation change occurs between input (turbine revolution sensor) and output (revolution sensor) and shifting time is long or when shifting ends immediately or when engine revs up unusually during shifting.So check out these points and see if any are all help keep me posted

Sep 20, 2014 | 2002 Honda Accord

1 Answer

Hello i cant park my nissan maxima 1993 and i cant get out the key too wat should i do ?


SOUNDS LIKE THE INTERLOCK ON THE SHIFTER IS BROKEN,THERE SHOULD BE A RED BYPASS BOTTEN AT THE TOP OF THE SHIFTER NEAR THE (P) POINT TRY PRESSING IT DOWN AND SHIFT THE LEAVER, IF IT DON 'T WORK THEN THE SHIFTER MAY HAVE TO BE REPLACE, YOU MAY GET ONE CHEEP AT A WREAKING YARD.

Sep 03, 2011 | 1993 Nissan Maxima

1 Answer

How do I fix my Nissan Maxima 1991's shift gear?


Do you hear a click near shifter when ignition is on and you step on brake? if not you have a Shifter Interlock problem. you ennd to check fuses for a possible blown fuse. If it is not a fuse it could be the Switch or solonoid. If you hear the click and can not shift, can you press on shifter lock button? if not Shifter Lock is malfunctioning. It must be taken apart to diagnose what it is exactly. If you CAN push Button then it could be the shift cable itself is frozen, and needs replaceing

Oct 09, 2009 | 1991 Nissan Maxima

1 Answer

1996 NISSAN MAXIMA, IT IS AN AUTOMATIC, WHEN I PUSH IN THE CLUTCH IT STILL CATCHS BUT THE GEAR SHIFT DOES NOT AT ALL. I DON'T EVEN NEED TO PUSH IN THE CLUTCH TO MOVE IT. WHAT COULD THE PROBLEM BE?


I believe you mean it is a manual tranny. I believe the shift fork in the tranny is messed up or the linkage from the shifter to tranny is diconnected. In order to check the linkage pull the car up on ramps and lock the rear brakes. Find the shifter under the car and follow the linkages to the tranny. The shift fork will have to be checked at the shop.

Sep 29, 2009 | 1996 Nissan Maxima

2 Answers

Nissan maxima wont shift into park


There is a little button in front of the shifter. I pushed on this while moving the shifter back and forth. It immediately went down and I was able to put he car in park and then pulled out the key.

Jul 04, 2009 | 1993 Nissan Maxima

Not finding what you are looking for?
2005 Nissan Maxima Logo

Related Topics:

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...