Question about 2002 Ford E350

Open Question

Location of front blower resistor 95 ford e350

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mutthu273
  • 3 Answers

SOURCE: location of blower motor resistor

in china

Posted on Jun 16, 2008

emissionwiz
  • 75822 Answers

SOURCE: blower motor resistor

It is under the hood in the heater case (passenger side), the right side of the case near the firewall as you face the engine.

Posted on Sep 02, 2008

chrischronic
  • 235 Answers

SOURCE: where is the resistor for

under the dash on passenger side. take the under dash pannel off and then you should be able to see it. its put in a hole in the heater/ blower motor case and has a 4 wire connector, unplug connector and then remove resistor.the wire colors should be 2 black and blue wires 1 black and yellow and 1 black.

Posted on Jan 14, 2009

iadame
  • 676 Answers

SOURCE: can't find fuel filter on 2004 ford e350 van

Should be on inside of frame just behind the driver door. You will need the tool to pull off lines.

Posted on May 08, 2009

  • 63 Answers

SOURCE: where is the blower motor resistor located on a

On Your Truck Im Not 100% Sure But Most Are In The Heater bow Right Behind The Glove Box

Posted on Aug 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the heater resistor fuse located on 2001 E350 ford van


The heater blower fuse controls power through the resistor, Ford have a habit of fitting the resistor in the air supply tube from the motor, so it is an airflow to help keep it cool.

Jan 05, 2014 | Cars & Trucks

1 Answer

I have a 1994 Ford e350 club wagon van.When i start the vanand turn the heat on it stay on for approx mins then starts blowing cold ar. blower motor, blower motor resistor, thermastat,control switch have...


is your heater core hooked up, on most vehicles there are two hose on the left side under the hood that goes thru the fire wall if they are not there then that,s your problem bad heater core.

Sep 17, 2012 | 2002 Ford E350

2 Answers

On a 1999 Ford E350, why does the blower motor only work on high? could it be a fuse, if so where is it located?l


On the blower box on the firewall there is a small orange fiberglass piece wires going in to it. Unplug the wire, then un bolt it you will find three springs on it. Small, medium and large. Those are the resistors change tjhe speed. They must be broken or rusted. Replace the whole piece (blower switch resistor) its around $25 easy to replace

Jun 20, 2011 | 1999 Ford F350 Regular Cab

1 Answer

Front blower motor will not work in 1994 f 350 van all fuses are good no power anywhere (at switch, resistor, or blower motor in any position


check the 50 amp fuse in teh engine compartment fuse/realy box. Also check the blower motor relay that the fuse protects.
Alos, check fuse 9, 15 amp in fuse panel in truck.

Test by applying 12 volts to teh orange/red wire at teh blower motor connector. Use a 10 or 12 gauge wire with a 25 or 30 amp fuse in line.

report back

Jan 11, 2011 | 2002 Ford E350

1 Answer

What is the location number on a a/c fuse on the


If you don't have your owners manuel to find the fuse/relay location, you can go to flmowner.com and at no cost look at your owners manuel online.
If the fuse/relay is good the possibilities are the switch or the blower motor, with the blower motor being more likely.
If your blower works on high only (maybe not your case, just fyi), the problem is likely the blower motor resistor.
I hope this is helpful.

Mar 17, 2010 | 1997 Ford Econoline

2 Answers

Hi, My blower on my E350 1994 Ford is not working anymore... Where is it? Perhaps I can replace it myself. HELP !!!


i have a 2000 Ford E350 1 ton Van the heat works in front but blows cold air in rear. Would the problem be a blower heater switch and where is it? I hope I don't have to take off the whole dash.

Jan 28, 2010 | 2002 Ford E350

1 Answer

I have a 2000 ford E350 van with front and rear air. the front blower motor runs at low speed, The front blower still runs on low even when the knob is set on medium or high. I do not know where the...


it's either the blower motor switch or blower motor resister. Resistor ?Heater Blower Motor Switch Removal Remove the battery (10655) ; refer to Section 414-01 . Remove the battery tray. Remove the screws. Remove the battery tray. Disconnect the heater blower motor switch resistor connector. Remove the heater blower motor switch resistor (18591). Remove the two screws. Remove the heater blower motor switch resistor. ----------------------------------- Switches Removal Disconnect the battery ground cable. Remove the center trim panel; refer to Section 501-12 . Remove the control assembly. Remove the screws. Remove the control assembly. Remove the A/C-heater function selector switch knob. Disconnect the vacuum harness connector. Disconnect the A/C-heater function selector switch connector. Remove the A/C-heater function selector switch. Remove the screw. Remove the A/C-heater function selector switch. Remove the temperature control switch knob. Disconnect the temperature control switch connector. Remove the temperature control switch. Remove the screw. Remove the temperature control switch. Remove the heater blower motor switch knob. Disconnect the heater blower motor switch connector. Remove the heater blower motor switch (18578). Remove the screw. Remove the heater blower motor switch. ----------------------------

Mar 31, 2009 | 2007 Ford E-350 Super Duty Length XLT

1 Answer

A/c fan only works on high


You will have to replace the blower motor resistor. It is located right beside the blower motor, look to the right of motor next to the rubber hose on the side of the blower motor,it will have a four wire connector to it the wire colors are OG/BK,LB/OG,RD/OG,and BK, it will be held in by 2 screws.You will have to remove the battery and battery tray to access it.

Mar 24, 2009 | 2002 Ford E350

Not finding what you are looking for?
2002 Ford E350 Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...