Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Before you make any other moves, I would try having the transmission flushed and refilled and filters changed and if that doesn't work, you may have burned out the modulator so you may have to shop around for another transmission or have that one rebuilt, whichever would be feasibly financial for you.
Posted on Dec 25, 2008
have ur shift linkage bushings replaced....most likely thse are torn or completely broken .. this is common on these models..also on some vw's of the same years
Posted on Apr 10, 2009
Unfortunately there is no solution to this except to take it back to Iveco for reprogramming.
I am led to believe from my locksmith that there are two types of transponders generally put into cars and vans.
The first is a simple chip wtih a code which matches a code in the car / Van
The second is a chip which has a set of codes. They are read in order and the car / van remembers which one was used last. If you use the wrong code in the sequence then the car / van will ignore it and not let you start the engine.
The Iveco is unfortunately in the second group. If, like me, you snap your key, you can superglue a new key to the old and it works fine. The chip doesn't need to be "too" close to the barrel. Yes, it looks ugly, but it's much cheaper!
Posted on Apr 19, 2009
It appears you have a Forward Clutch FAILURE. Replace the trans after you get it diagnosed and verified by a professional technician. By the way, do you have a Check Engine light? If so, what is the diagnostic code? The dealership can scan the system and find any codes which may have been stored in the TCM (Transmission Control Module). If there were any 'Incorrect Gear Ratio" codes, it's most probably the trans itself.
Posted on May 28, 2009
Tips for a great answer:
May 04, 2017 | Cars & Trucks
Apr 14, 2017 | Cars & Trucks
Mar 04, 2014 | 1997 Mercury Villager
May 31, 2011 | Nissan Minivan Cars & Trucks
Mar 31, 2011 | Ford Windstar Cars & Trucks
Aug 14, 2010 | Chevrolet G20 Cars & Trucks
Mar 01, 2010 | 2003 Ford Windstar
Mar 15, 2009 | 2000 Chevrolet Tracker
179 people viewed this question
Usually answered in minutes!