Question about 2000 Mazda 626

Open Question

Lost my keys for my 2001 mazda 626 can i turn the immobiliser off?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 24 Answers

SOURCE: Replacing the battery to the remote for the alarm for mazda 626

you should be able to slide a small-bladed flathead screwdriver in between the 2 pieces and carefully pry the pieces apart.

Posted on Feb 05, 2009

soc21610k
  • 215 Answers

SOURCE: 2001 mazda 626 4 cyl engine turns over, but won't

See about getting a fuel pressure test. Or if your bold just go ahead and change the fuel filter. If both fail you might need a fuel pump

Posted on Jun 04, 2009

batviper
  • 120 Answers

SOURCE: 2001 Mazda 626 will not come out of park. Gear

shift cable or linkage is broke or poped off

Posted on Nov 17, 2009

Testimonial: "Finally had my very busy mechanic friend take a look last night and indeed that was the problem. Thanks so much!"

bschilz
  • 2049 Answers

SOURCE: what is the oil capacity of a mazda 626 LX

2.0L - 3.7 quarts.
2.5L - 4.2 quarts.

Posted on Nov 28, 2009

wracefans24
  • 1985 Answers

SOURCE: 2000 mazda 626 wont start,is turning over,fuel

if you have spark at the plugs you need to check fuel pressure at reed valve on fuel rail,you will need at least 55psi to fire injectors,

Posted on Dec 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I programme a new door opner?


Mazda 626

for the easy solution download the pdf file

Mar 06, 2016 | Mazda 626 Cars & Trucks

1 Answer

Shrader valve on a 2001 626 Mazda


there is no shrader valve on the 626 u need to pull the plug on the top of the filter but your problem sounds like a main relay under dash

Feb 14, 2014 | 1999 Mazda 626

1 Answer

I have lost the key to my Mazda 626, I have a spare key but this only opens the door. It does turn the car over but because of immobiliser it won't start car. Going to cost $500 to get a new key through...


Without having a spare key with the chip, its going to be expensive.
A locksmith may be able to make a roadside service call and get it done, but probably not much cheaper than the dealer.

Jan 21, 2014 | Cars & Trucks

1 Answer

Got a mazda 626 2001 motor turns over bt dosnt start the coil is good and so r the plugs and wires motor wont turn over with key either have to acr the starter


Make sure you have a spark at the plugs. Also if you can , check fuel pressure and fuel out of injectors....a little more work.

Hope this helps

Good Luck

Jun 29, 2011 | 1993 Mazda 626

1 Answer

Ignition key won't turn 2001 626 mazada


did you damage your key in some way take pressure off your steering wheel turn steering wheel some while turning key could have damaged your ignition

Nov 29, 2010 | 2001 Mazda 626

1 Answer

2001 Mazda 626 4/cyl/ The immobilzer unit problem


that is bollox,the dealer has 30 mins to recalibrate the system or it will shut down and need all he said,is he for real a mazda dealer.........or are you rich looking????? get it to another dealer,ask them to get 2 keys and recalibrate(assuming the first dealer has not caused a meltdown of the system.....)the problem you may have is they may not know about the 30 min rule...its to stop thieves from changing keys on stolen cars.......

Jun 02, 2010 | 2001 Mazda 626

1 Answer

Failed inspection - mazda 626, year 2001


Your cig lighter is only supposed to operate when your key is in the on or acsessory position. Did the tester turn the key on,or start the car?

Aug 20, 2009 | 2000 Mazda 626

1 Answer

My mazda 626 2001 starts but shuts right off


this could be caused by a variety of problems,one that comes to mind is fuel pump electronics,its pumping to start when ign key is in start position but not in the running position.Also it could be the immobiliser,then again a fuel flow meter or the coil pack.To mess around with it on the off chance of hitting it first time is doubtfull,this is a case of hands on to "feel" the problem so i would suggest you call a mobile mechanic to diagnose it for you at least .

Feb 08, 2009 | 2001 Mazda 626

1 Answer

CAR KEY


The 1st key cost more because they have to reset the cars security system to make it recognize the new key, once that is done is easy to do the 2nd key, thus less money for the second key.

Aug 06, 2008 | 1999 Mazda 626

Not finding what you are looking for?
2000 Mazda 626 Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...