Question about 2003 Ford Mustang

Open Question

Lock nut size 2003 mustang bering spindle - 2003 Ford Mustang

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
polarcycle
  • 1392 Answers

SOURCE: torque specs for front spindle (nut hold brake drum in place)

Tighten till the wheel bearing is tight. No one really uses a specification for that, do it by feel. when the nut is tight, and there is no play in the bearing. Should be about 15-20 ft/lbs, with about .001-.003 end play if you need exact numbers though.

Posted on May 30, 2009

Ad
  • 184 Answers

SOURCE: How do I put the front right rotor back on the

Make sure you remove all the rust from the spindle and rotor. Make sure the bearing races are all flush. Use a rubber mallet,not a hammer
to properly seat the rotor. Good luck.

Posted on Apr 01, 2010

Testimonial: "Very helpful answer "

Mustang_Guru
  • 85 Answers

SOURCE: how to remove lock nut on front bering

You just need a good socket and a very large breaker bar! The factory torque is 221-295 foot pounds! Ford also recommends replacing the nuts after servicing as they are one time use! They run about $12 (Oreilly) and you dont have to get them from a dealer. Best wishes!


mustang_guru_11.jpg

Posted on Jan 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What size socket do i need to fit axle nut on a 2007 dodge caliber?


I told you already 22mm. It was a guess, but it was right!!

http://www.oreillyauto.com/site/c/search/Spindle!s!Axle+Nut/01232/C0362.oap?year=2007&make=Dodge&model=Caliber&vi=1433273

Dodge Caliber 2007, Front Spindle Nut by DormanĀ®. Thread Size: M22-1.5. Packaging Quantity: 5. Packaging Type: Box. Dorman's Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the...Direct replacement for a proper fit every timeHigh quality steel construction more details on -
https://www.carid.com/2007-dodge-caliber-driveline-axles/dorman-spindle-nut-31531756.html


axle nut on 2007 dodge caliber Google Search

Jan 22, 2017 | Dodge Caliber Cars & Trucks

1 Answer

2002 Avalon spindle nut removal


To replace the spindle lock nut:
  • Raise the vehicle and support it on jackstands.
  • Remove the wheel and the wheel cover.
  • Remove the spindle dust cap.
  • Pull the cotter pin.
  • Unscrew the spindle lock nut. If the nut is a multiple-piece type, make sure you remove all of the pieces.
  • Reverse these procedures to complete the installation.
  • Torque or adjust the nut according to the manufacturer's specifications

May 09, 2012 | 2002 Toyota Avalon

1 Answer

How to remove lock nut on front bering


You just need a good socket and a very large breaker bar! The factory torque is 221-295 foot pounds! Ford also recommends replacing the nuts after servicing as they are one time use! They run about $12 (Oreilly) and you dont have to get them from a dealer. Best wishes!


mustang_guru_11.jpg

Jan 14, 2011 | 2003 Ford Mustang

1 Answer

How to change a 2003 mini cooper wheel bearing


Remove the wheel then remove the brake caliper and rotor, remove nut from lower balljoint split balljoint and control apart,remove the cv nut from axle then pull spindle back and slide cv shaft out of spindle,next on the rear of the spindle remove the bolts that hold bearing to spindle then use a hammer to tap bearing out of spindle here a picture to help you locate the bolts on the spindle and to see what it looks like,984d3b5.jpg

Oct 04, 2010 | 2003 Mini Cooper

1 Answer

How do I put the front right rotor back on the spindle after a wheel bering replacement? I can't get it on far enough to get the spindle nut on. 2003 F250 2WD


Make sure you remove all the rust from the spindle and rotor. Make sure the bearing races are all flush. Use a rubber mallet,not a hammer
to properly seat the rotor. Good luck.

Apr 01, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

I have 66 mustang 4 lug front spindles,was wondering if a 70 cougar spindles 5 lug would bolt in or do i need the granada swap?


I think they will work.
If they wont its only because of the ball joint pin size is different.
What I mean by the balljoint pin, is the tapered pin that has the threaded tip for the nut.
The way to check is to measure the pin size and compare them to the ones you have.
If they are not the same it may be possible to find balljoints with the proper size pin that will fit the mustang control and A arms. (somtimes a pain in ****).
With that all said, the other part of the conversion, Im sure you know,is the master cylinder and the proportioning valve for disk brakes.
you can also use a manual adjustable proportioning valve if you did not want to use one made for disk brakes.

Nov 05, 2009 | 1966 Ford Mustang

1 Answer

Front wheel berings 2003 silverrado 1500 4 wheel drive describe procedure to change out


reomve tire securing the vehicle with tire hanging at it's lowest possition, remove the brake caliper & brake disc , remove nut lock on axle also axle nut , mark and remove strut bolts and push strut out remove ball joint lower bolt and use a fork ( tooling) seperate from hub slide hub off of axle , reverse steps to replace .

Aug 22, 2009 | 2003 Chevrolet Silverado 2500HD

1 Answer

Torque specs for front spindle (nut hold brake drum in place)


Tighten till the wheel bearing is tight. No one really uses a specification for that, do it by feel. when the nut is tight, and there is no play in the bearing. Should be about 15-20 ft/lbs, with about .001-.003 end play if you need exact numbers though.

May 29, 2009 | 1965 Ford Mustang

Not finding what you are looking for?
2003 Ford Mustang Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...