Question about 1994 Saab 900

1 Answer

Reading saab 900s obd codes

I am after a scanner and code clearer for my saab. It has the OBD 2 connnector

Posted by on

  • Erik Reurts
    Erik Reurts Mar 01, 2012

    It is generic and for other cars. I am after specifics. A scan tool for my saab 900s (1994)

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Saab Master
  • 5,370 Answers

For OBD code problems check the list of help links below. Click the link below to go through its procedure.--------------Diagnostic Code P2195?http://schematicsdiagram.blogspot.in/2012/02/diagnostic-code-p2195-on-toyota-avalon.html--------------Diagnostic code P1330?http://technoanswers.blogspot.in/2012/02/diagnostic-code-p1330-on-kia-2wd.html------------Diagnostic code P0700, P1330, P1121?http://technoanswers.blogspot.in/2012/02/diagnostic-code-p0700-p1330-p1121-on.html-------------shows error code P1330?http://technoanswers.blogspot.in/2012/02/2003-kia-sorento-shows-error-code-p1330.html--------OBD code P1330?http://technoanswers.blogspot.in/2012/02/obd-code-p1330-on-2003-kia-sorento.html------------OBD code P01300?http://technoanswers.blogspot.in/2012/02/obd-code-p01300-on-toyota-rav4.html--------------OBD code P0768?http://repairhelpcenter.blogspot.com/2012/01/obd-code-p0768.html------------Evaporative Emissions System codes details?http://schematicsdiagram.blogspot.com/2011/11/evaporative-emissions-system-codes.html--------------- Engine Misfire codes?

http://schematicsdiagram.blogspot.com/2011/12/engine-misfire-codes-on-chevrolet.html

----------------


Misfire on cylinder 4?

http://schematicsdiagram.blogspot.com/2011/12/misfire-on-cylinder-4.html

--------------
ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html

------------
Diagnostic code P0010?http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-p0010.html-------------Diagnostic Code P1396?

http://howtobyme.blogspot.com/2011/11/diagnostic-code-p1396.html

--------------
Code P0452?

http://howtobyme.blogspot.com/2011/11/code-p0452.html

-------------


OBD code P0172 on Buick?

http://howtobyme.blogspot.com/2011/11/obd-code-p0172-on-buick-park-avenue.html

-------------
DTC Code P0321?

http://howtobyme.blogspot.com/2011/11/dtc-code-p0321-on-buick-park-avenue.html

------------------


Error Code P0471?

http://howtobyme.blogspot.com/2011/11/error-code-p0471-on-2007-dodge-ram-3500.html

-------------
P0304 Error code?

http://howtobyme.blogspot.com/2011/11/p0304-error-code-on-dodge-neon.html

-----------------


OBDII scan is receiving NO BUS CODE?

http://howtobyme.blogspot.com/2011/11/obdii-scan-is-receiving-no-bus-code.html

-----------
How to Clear OBD error Codes?

http://repairhelpcenter.blogspot.com/2011/11/how-to-clear-obd-error-codes-on-acura.html

----------------
Diagnosis and Testing Car Components?

http://vwrepairhelp.blogspot.com/2011/11/diagnosis-and-testing-car-components.html

--------------
Diagnostic Trouble Codes list?

Part 1.

http://repairhelpcenter.blogspot.com/2011/11/diagnostic-trouble-codes-list-for-acura_18.html

--------------
Diagnostic Trouble Codes list?

Part 2.------

http://repairhelpcenter.blogspot.com/2011/11/diagnostic-trouble-codes-list-for-acura.html

------------
OBD Code is cleared but check engine light will not RESET?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-is-cleared-but-check-engine.html

--------------
Diagnostic Code 43 and 71?

http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-43-and-71-on-1991.html

------------------
Code P0132?

http://schematicsdiagram.blogspot.com/2011/12/code-p0132-on-acura-tl.html

-------------
P0031 code?

http://schematicsdiagram.blogspot.com/2011/12/p0031-code-on-dodge-dakota.html

--------------
How to get diagnostic Code without OBD Scanner on Pre 1995 cars?

http://schematicsdiagram.blogspot.com/2011/12/how-to-get-diagnostic-code-without-obd.html

------------
OBD-II Trouble Code P0300?

http://schematicsdiagram.blogspot.com/2011/12/obd-ii-trouble-code-p0300.html

-------------
Getting diagnostic code P0016?

http://schematicsdiagram.blogspot.com/2011/12/getting-diagnostic-code-p0016.html

--------------
How to Read Codes from Check Engine Light?

http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html

-------------
Diagnostic Code P0540 continues to return and the MIL light is on?

http://schematicsdiagram.blogspot.com/2011/12/diagnostic-code-p0540-continue-to.html

-----------
DTC Trouble Code P0401?

http://schematicsdiagram.blogspot.com/2012/01/dtc-trouble-code-p0401.html

-----------------
Car misfires and error code P0306 and P0303 is shown?

http://technoanswers.blogspot.com/2012/01/car-misfires-and-error-code-p0306-and.html

-------------
Diagnostic code P0463?

http://technoanswers.blogspot.com/2012/01/diagnostic-code-p0463-on-ford-f250.html

-------------
Check engine light with codes P2195 and P2197?

http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html

------------
Diagnostic error code P0121,P0505,P1000,P2101,P2104, P2110,P2135,P2106?

http://technoanswers.blogspot.in/2012/01/diagnostic-error-code.html

--------------
P0174, P0037 and P2197?

http://technoanswers.blogspot.in/2012/02/p0174-p0037-and-p2197-on-toyota-rav4.html

-----------
P0352 Obd code?

http://technoanswers.blogspot.in/2012/02/p0352-obd-code-on-toyota-rav4.html

-------------
Error code p0402?

http://technoanswers.blogspot.in/2012/02/error-code-p0402-on-ford-escape.html

---------
Obd Code P0763?

http://technoanswers.blogspot.in/2012/02/obd-code-p0763-on-lexus.html

-------
OBD code P0301, P0430 and P0174?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-p0301p0430-and-p0174.html

---------
OBD code P0500?http://schematicsdiagram.blogspot.in/2012/02/obd-code-p0500-on-lexus-rx-300.html
-----------This will help.Thanks.

Posted on Feb 26, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 341 Answers

SOURCE: Looking for OBD I Code Reader for 1995 SAAB 900SE v6

www.ToolSource.com

Posted on Oct 23, 2008

  • 135 Answers

SOURCE: Radio code for 1997 saab 900s

I'm afraid if you don't have the code, you will have to take it to a local dealer or specialist radio store to have it re-coded.

Fortunately, it's not expensive.

Posted on Feb 24, 2009

landsend
  • 1066 Answers

SOURCE: How do you read the oil level correctly on

All dipsticks have an upper and lower mark ..the top mark is the full mark and the lower mark is the add oil mark. Check it with the engine off on level ground.  Also after the motor running at take a few minutes for the oil to return to the oil pan to get an accurate reading.  
Do not overfill.

Posted on Mar 23, 2009

  • 30 Answers

SOURCE: don't knwo whr obd connector is found on 1996 saab 900 s

is it a 16v saab with engine code B202 if so it is a three pin connector in the right hand side fuse box. that where auto data is showing it anyway. 

Posted on Mar 30, 2009

mx5turbo92
  • 545 Answers

SOURCE: remove/replace shock absorber assembly 900s 1995 saab

  1. Slightly loosen hub center nut when all four wheels are on ground.
  2. Raise and support vehicle, then remove five wheel bolts and wheel.
  3. Remove hub center nut, then the wheel sensor,
  4. Press back brake piston using slip-joint pliers,
  5. Remove caliper from steering swivel member, then suspend in wheel housing with cable tie.
  6. Remove brake disc and back plate, then slightly loosen tie rod end nut.
  7. Press out tie rod end nut using puller tool or equivalent.
  8. Remove nut and tie rod end bolt, then the anti-roll bar to swinging arm nut.
  9. Remove outer ball joint nut.
  10. Press ball joint out of steering swivel member using puller tool or equivalent, installed on spring link.
  11. Remove nut and discard. This self-locking nut must not be reused.
  12. Remove three upper mounting nuts for MacPherson strut, then the strut.
  13. Clamp MacPherson strut in vice.
  14. Compress spring using spring compressor or equivalents.
  15. Hold piston rod and remove nut using MacPherson strut socket tool 89 96 662, or equivalent. This is a self-locking nut and must not be reused.
  16. Remove mounting and top spring seat, then the coil spring, gaiter and compression stop.
  17. Unscrew damper using wrench tool No. 89 96 670, or equivalent, then remove damper from strut.
  18. Reverse procedure to install, noting the following:
    1. Screw damper in place using wrench tool No. 89 96 670, or equivalent.
    2. Lower end of coil spring should abut against stop in bottom of spring cup.
    3. Position MacPherson strut on vehicle and install three retaining nuts on top mounting. Tighten nuts alternately, according to specifications.
    4. Always use new hub center nut with self-locking threads.

Posted on Jun 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

E46 320i 2002 model cranks but will not start.pump pressure is ok at 3.2b plugs have spark what could be the problem


I would first check for error codes using an OBD-II scanner tool- then research the Diagnostic Troubleshoot Code(s) to point you in the direction of the problem. Most common error is when DIYers read the scanner tool and automatically assume scanner codes pulled will pinpoint the exact problem. Scanner tools vary in scope. The bottom line, use the tool as a starting reference point, but you will have to test the component to make sure it is the one that is malfunctioning. You can read more about OBD-II codes at the following URLs:

OBD II Trouble Codes Home


OBD Frequently Asked Questions Scan Tool Center

Feb 13, 2017 | Cars & Trucks

1 Answer

How to read obd code suzuki aerio


There should be two OBD ports on this vehicle, one under the steering wheel the other is located by the computer unit under the hood. Attach an OBD reader or OBD II Reader (available to be borrowed from most car part stores) and read the code.

Sep 08, 2014 | 2004 Suzuki Aerio

1 Answer

The check engine light is on my 1995 Saab 900s. I can not find a techician with the correct scanner.How can I turn off the light?


There are three ways to reset a check engine light.

1. Disconnect the battery, wait approximately 30 minutes, reconnect the battery. This resets the cars computer which also reset the check engine light. On newer OBD (on-board diagnostic) compliant vehicles this usually does not work. See step 2.

2. Reset using an OBD II reader. When you hook an OBD II code reader up to your vehicle, you can reset the computer using the code reader.

3. Fixing the problem. Generally the check engine light comes on for a reason. Usually it is emission related (sensors, gas cap) or electrical (faulty wiring). In this case the way to reset the check engine light is to fix the problem

Oct 12, 2011 | 1995 Saab 900

2 Answers

Do i need a scanner to get codes out of 1995 monte carlo or can i do it with a code key or paper clip it has ob 1


1995 was a change over year some of the cars had obd I connectors and some had the obd II as far as i know you will need some type of code reader if you have the new style connector even though the system is still obd I commiucation . If it is the old style connnector you can jump it with a paper clip and read the codes from the flashing engine light , Just so you know you can have your car scaned for codes from most local parts stores for free.. but do not think this is a diagnose of the problem and let them just sell you a part .

Mar 04, 2011 | 1995 Chevrolet Monte Carlo

1 Answer

What does p0140 code mean n what culd i do about it


O2 sensor. There are troubleshooting procedures here: http://www.obd-codes.com/p0140
Procedures require the use of a good OBD II scanner.
If you have the money, you can try replacing the sensor to see if it clears the code. It's easy to replace.

Sep 03, 2010 | 1998 Saab 900

2 Answers

1999 saab 95 speedometer not working, abs and check engin light comes on


You will need to have your car's ECM (Computer) read by a OBD II scanner to determine what Trouble Code your ECM is giving so a mechanic can properly diagnose the problem. You can go to your local AutoZone store and they can pull the codes out of your ECM for no charge.

Jun 04, 2010 | 1999 Saab 9-5

2 Answers

What does code 1-p0650 mean?


P0650 Malfunction Indicator Lamp (MIL) Control Circuit Malfunction

Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.

Possible Causes:
  • Harness or connectors (MIL circuit is open or shorted.)
  • MIL bulb may be faulty
  • May 10, 2009 | Hyundai Accent Cars & Trucks

    3 Answers

    OBD 1 and 2 will not communicate with PCM.


    a blown fuse will also cause the obd to not communicate

    Nov 12, 2008 | 1994 Pontiac Bonneville

    2 Answers

    1995 900s OBD1 OBD2 ?


    1995 is OBD 1. Saab became OBD 2 compliant in 1996. The error message may represent a communication problem between the device and the on board electonics, although this most often is manifested by failure of the reader to provide any message. Check your diagnostic port on the back side where the wires enter it. You will need to remove the two screws that secure it to the underside of the lower dash panel beneath the steering wheel to do this. Make sure that none of the pins have been pushed through the back side or have been loosened within the port. If it looks suspicious, try holding the wires securely into the port when connecting to the scanner. It may help to have an assistant who can experiment with various positions pushing against the backs of the pins while you try to get a secure connection. If this is not the problem, the scanner you purchased my employ the wrong communication standard for Saab cars, which is ISO 9141. There are three others out there in common use.

    Sep 07, 2008 | 1995 Saab 900

    Not finding what you are looking for?
    1994 Saab 900 Logo

    1,805 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Saab Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    rgbypoet

    Level 2 Expert

    166 Answers

    Are you a Saab Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...