Question about 1991 Buick Park Avenue

1 Answer

Why do my headlights turn off when I try to turn on the high beams in my 91 buick park avenue?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Its probably a short in the stearing column, youll have to take the stearing column apart to check this

Posted on Feb 07, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

omaromid
  • 332 Answers

SOURCE: 2007 buick allure headlights will not turn

As you described the problem the solution is to replace the headlight bulbs, they have two elements one for normal lighting or low beam and one for high beams. the elements for the low beams are continuously used and are subject to burn sooner.

Posted on Feb 15, 2010

  • 299 Answers

SOURCE: the high beam switch won't stay on for a 2000

Needs new dimmer switch.

Posted on Jun 17, 2009

  • 256 Answers

SOURCE: 1994 buick century headlights not working

Go through all your fuses, Dim lights run on a separate fuse.

Posted on May 07, 2009

  • 7353 Answers

SOURCE: 1999 buick park avenue low-beam headlight out

Some of these, the headlight housing comes out, usually 2 thumbscrews that are easily removed to access the housing. Tools usually are not needed,

Posted on Nov 24, 2009

  • 44 Answers

SOURCE: 1991 Park Avenue: Where is the fuel filter on a 91 Buick...

Hi

First off the fuel filter is usually located in the under body, under the rear passenger door. Best tools to use. I recommend two open end wrenches of the correct size. Always turn counterclockwise when loosening.

If the filter has been under there for a well, you might want to use some liquid wrench or WD 40. Saturate the bolts really good about 48 hours before repairs, on a 19 year old car, you'll probably be glad you did. No special procedure, it's self explanatory, installation is the reverse of removal.

For safety make sure you first relive the pressure in the fuel system before disconnecting the fuel line. Under the hood, on the fuel rail assembly, and behind the port that holds the fuel pressure regulator in place, is the metal valve stem that acts as the fuel system pressure relief valve. Take the valve cap cover off and push the pin in to relieve the fuel pressure. Maybe having a plastic bottle to catch the gas that will escape would be a good idea.

Always safety first. Hope this helps.

Posted on May 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High beams not working on 1991 buick park avenue only have dim lights that are working


I couldn't find any information on a headlight relay for your car, so it must be a fuse. I would also check the headlight bulbs, although it would be unusual that both of them burned out at the same time.

Jan 07, 2011 | 1991 Buick Park Avenue

1 Answer

What do you check if high beam lights do not come on buick park avenue 1998


you may find that your high & low beam lights might have different fuses,you need to check the fuse box under the hood to see if there are any blown fuses......hope this helps.....cheers

Jul 23, 2010 | 1998 Buick Park Avenue

1 Answer

Checked my fuses, checked all the fuses, checked the relays


No if that were the case you would have no parking lights. Headlight switch is bad.
Good luck, dont forget to rate.

Jan 05, 2010 | 1991 Buick Park Avenue

2 Answers

1999 buick park avenue low-beam headlight out


there are two little brackets you have to pull on to release the bulb housing they are on the top/rear of the housing assembly

Nov 24, 2009 | 1999 Buick Park Avenue

1 Answer

1999 buick park avenue passenger low-beam out / bulb inaccessible


There are 2 screws that hold the head lamp assembly.Remove the screws and pull the headlamp out.You should be able to remove the low beam bulb out.Check and make sure it works before you put it back together.Good luck.

Nov 24, 2009 | 1999 Buick Park Avenue

1 Answer

BOTH LOW BEAMS QUIT WORKING BUT HIGH BEAMS STILL WORK.


try replaceing the headlight relay switch or the headlight multi function switch.

Jul 04, 2009 | 1991 Buick Park Avenue

Not finding what you are looking for?
1991 Buick Park Avenue Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...