Question about 1999 Honda Accord

Open Question

What causes transmission code po753 in 99 honda accord

How to fix code po753

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

mrgreenz
  • 962 Answers

SOURCE: 99 HONDA ACCORD BRAKE LIGHT (DASH) KEEPS COMING ON

You have to have your brake system checked. It is a malfunction. the brake light comes on when the computer module senses something wrong with the main brake system.. If it was the ABS it would be different.

Posted on Feb 16, 2009

  • 38 Answers

SOURCE: Automatic Transmission Slips

there are a multitude of additives that can possibly get you working for a little while, but unfortunately if it is really slipping, nothing short of a rebuild can fix the problem. The additives will only prolong the life for an indeterminable amount of time.... if at all.

Posted on May 12, 2009

messstat
  • 365 Answers

SOURCE: 2001 HONDA ACCORD CODE P0740 TRANSMISSION

Horsecrap...go to an independent transmission dealer after you call the extended warranty folks and complain!
I can count the number of Honda transmissions that go bad before 300,000 miles on one hand.
Good Luck

Posted on Jun 22, 2009

  • 3 Answers

SOURCE: reset transmission speed sensor 93 honda accord

I have been looking for help with the VSS on 88 prelude. Found this page,maybe it will help you.

.http://techauto.awardspace.com/vss.html

Posted on Aug 10, 2009

Mustgo
  • 2359 Answers

SOURCE: My 99 Honda Accord keeps stalling after warmed up

Low / uneven idle problem can cause by a lot of components.

Dirty air filter

Dirty injectors + o-rings

Vacuum leak at intake manifold and vacuum hose.

Bad Idle Air Control Motor (IAC)

Low compression (170 psi + is OK)

Start cleaning and repair these trouble spots and see is there any improvement.

====

For more advance DIY'er then you may try this.

Use a can of Berryman carburetor clean to locate the vacuum leak.


SEE SAMPLE PICTURE HERE


This is a 20-30 minutes job.

Vacuum leaks can occur in following locations.


Intake manifold AND/OR vacuum lines.


Intake manifold is not accessible unless the engine head if off.

You can still check the potential leak by spraying some Berryman near the intake manifold.

Listen for rpm increase after you introduce the Berryman (FUEL) at idle.


Do the same starting from the brake booster unit (the round unit) on the drive side fire all.

Carefully listen for increase of RPM right after to spray the Berryman to the potential vacuum spot.

Get a friend to HEAR the ROM increase or monitor for RPM on the tech.

DO NOT AIM the Berryman into any heat source.


PLEASE RATE my answer if it is useful to you.

Posted on Dec 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vsa,brake, abs linght on and D flashing when I turn on key


You need to have the vehicle scanned for fault codes and then the causes of those codes diagnosed.

You will need to have this car checked out by a professional with the right diagnostic equipment for Hondas. The Vehicle Stability Assist (VSA)***, brake and ABS warnings may just be due to a failed sensor or sensors but you need to have a proper diagnosis carried out so the causes can be identified and any failed parts replaced.

The flashing D light relates to the auto transmission and may well be a caused by a faulty sensor on the transmission or something else. The correct scanner should throw up any fault codes being generated. In the meantime if your Accord model has the engine bay filler tube and diptstick for the auto transmission , check your fluid level in the auto transmission.

***VSA..................
http://techinfo.honda.com/rjanisis/pubs/OM/RL0000/RL0000O00189A.pdf

Nov 19, 2015 | 2009 Honda Accord

1 Answer

How to fix the automatic transaxle malfunction


Possible causes of OBD code P0780
- Low transmission fluid level - Dirty transmission fluid - Faulty shifting solenoid valve - Shifting solenoid valve harness or connectors - Shifting solenoid valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0780 codes is detected when no rotation change occurs between input (turbine revolution sensor) and output (revolution sensor) and shifting time is long or when shifting ends immediately or when engine revs up unusually during shifting.So check out these points and see if any are all help keep me posted

Sep 20, 2014 | 2002 Honda Accord

1 Answer

Code P0706 2000 honda accord


P0706 Honda - Open In Transmission Range Switch Circuit

Read more: http://engine-codes.com/p0706_honda.html#ixzz3A3drXjAn

Jun 30, 2014 | 2000 Honda Accord

1 Answer

Honda accord 2001 code PO700


P0700 HONDA Description The Transmission Control Module (TCM) monitors the malfunction of sensors and actuators relating to transmission control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transmission control.

Read more: http://engine-codes.com/p0700_honda.html#ixzz21ghTELGA

Jul 25, 2012 | 2001 Honda Accord

1 Answer

2004 honda accord automatic gear jerking, what could be the likely cause and solution


Has the transmission control module been scanned for fault codes? This is an electronically controlled transmission. Do you have any flashing lights or a check engine light on by chance?

May 22, 2012 | 2004 Honda Accord

1 Answer

My mechanic just installe a rebuilt transmission into a 1999 honda accord 4cly. but he forgot to put the o-ring on the torque converter It runs good now but the check engine light is on Will this cause...


you need to have the code pulled and see if it references a transmission code,if so then you need to have the mechanic fix the problem as he missed something and it can affect the transmission being damaged.after all you paid to have a job done correctly.if the code is not transmission related you should have it fixed as it can cause a problem else where.

Mar 30, 2011 | 1999 Honda Accord

1 Answer

Honda accord 2004 drive light flashing?


this means that there is a fault with the transmission, u will need the dealer to test the TCM (transmission control module) to see what fault code is stored to determine the cause of the light.

Dec 29, 2009 | 2004 Honda Accord

2 Answers

Car help


you have a clogged apssage or a faulty solenoid. Only hands on testing can fix this

Nov 23, 2009 | 1993 Honda Accord

2 Answers

Transmission


1,200 to 1,400 to repair the tranny.

Aug 08, 2008 | 1999 Honda Accord

Not finding what you are looking for?
1999 Honda Accord Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...