Question about 2004 Mazda MPV

Open Question

Mazda mpv sliding doors won't open - 2004 Mazda MPV

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4 Answers

SOURCE: mazda 2003 MPV door locks

I just fixed this same problem. It happened to me 3 different times in a month so I got good at it. Before you dive into removing your door try this. Pull the door handle and release it letting it snap back several times. The problem is a half open door latch that won't let the door unlock. Do this as aggressively as you can to attempt to get the latch to return to its original position. Check the door lock between flicks.

Ok, if that didn't work, here is how to remove the door.
1. Remove the screw behind the door latch, you will have to pop the plastic cover off first.
2. Remove the rubber insert in the door handle
3. Remove the screw that is now visible
4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van.
5. Remove the clips that attach to the lock and to the window controls (these can be a pain)
5. (Optional) Remove the bracket that held the window/lock control module

At this point your door is basically free, it is only held in place with plastic clips that can be easily forced off. If your door were open you would simple pull the bottom of the door out (hinged at the window) and lift it off. But since we can't pull because the door is closed we have to force it out.

From here it is pretty simple. Move the seat all the way back and tip the seat way back. Lift the door panel straight up. You will be breaking 2 plastic clips from the rear part but once you do it just pulls out. This is not that easy because the space is limited but just keep pulling and force the rear end of the door panel past the b-pillar. Once you do this it is free.

Have fun and try to keep the black gook from getting everywhere.

Oh, to fix the door lock just oil/grease it and manually move the mechanism several times.

Posted on Nov 11, 2008

Ad
  • 4 Answers

SOURCE: Removing Door Panel for MPV with door Stuck

I think the 04 should be very similar to the 03. Here is my fix for the 03

I just fixed this same problem. It happened to me 3 different times in a month so I got good at it. Before you dive into removing your door try this. Pull the door handle and release it letting it snap back several times. The problem is a half open door latch that won't let the door unlock. Do this as aggressively as you can to attempt to get the latch to return to its original position. Check the door lock between flicks.

Ok, if that didn't work, here is how to remove the door.
1. Remove the screw behind the door latch, you will have to pop the plastic cover off first.
2. Remove the rubber insert in the door handle
3. Remove the screw that is now visible
4. Now remove the window/lock control module, the back is free but the front has a plastic lip so lift the back up and pull towards the back of the van.
5. Remove the clips that attach to the lock and to the window controls (these can be a pain)
5. (Optional) Remove the bracket that held the window/lock control module

At this point your door is basically free, it is only held in place with plastic clips that can be easily forced off. If your door were open you would simple pull the bottom of the door out (hinged at the window) and lift it off. But since we can't pull because the door is closed we have to force it out.

From here it is pretty simple. Move the seat all the way back and tip the seat way back. Lift the door panel straight up. You will be breaking 2 plastic clips from the rear part but once you do it just pulls out. This is not that easy because the space is limited but just keep pulling and force the rear end of the door panel past the b-pillar. Once you do this it is free.

Have fun and try to keep the black gook from getting everywhere.

Oh, to fix the door lock just oil/grease it and manually move the mechanism several times.

Posted on Nov 21, 2008

stuarttx
  • 15 Answers

SOURCE: program remote control for mazda mpv 2002

Courtesy of: forums.mazdaworld.org

Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done

Posted on Feb 21, 2009

  • 740 Answers

SOURCE: 2004 mazda mpv sliding door will not unlock from

sounds like the lock rod fell off. Take the door pannel off and reatach it

Posted on Mar 24, 2010

  • 1 Answer

SOURCE: mazda mpv 2000 front passenger door is jammed

Your latch assembly may be frozen, or the door actuator faulty (a common problem on this vehicle).

Check out the following forum posts:

The basic problem:

http://forum.mpvclub.com/viewtopic.php?t=24351&highlight=door+actuator

Photos of the latch assembly:

http://forum.mpvclub.com/viewtopic.php?t=16431&highlight=panel+door+locked

How to disassemble the door panel (if you can open the door!):

http://www.mpvclub.com/diy.php?id=8

Posted on Oct 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2003 Mazda mpv back sliding doors (both sides) won't automatically open when I press the button.they will close when I hit the close button but that's it. Any suggestions would be greatly appreciated....


Got kids? Juice gets spilled along those tracks and with cheerios and mcdonalds fries they get gunked up good. Check the tracks and under the floor too.

Feb 25, 2015 | 2003 Mazda MPV

1 Answer

How do you replace mazda mpv rear door handle


remove inner panel look for hidden screws panel may have pop out clips so pull at panel gently should be 2 10 mm nuts that hold it in pop up clip pull out handle rod etc.

Feb 15, 2015 | Mazda MPV Cars & Trucks

1 Answer

How to remove sliding door inside panel of Mazda MPV


1. Work with slider in open position. It helps if you are on a slight incline so that door stays in fully-open position and won't slam shut on your fingers.
2. Remove inner handles and door panel:
a) Inner handle. Remove the inner handle first. You can't see it too easily but a wire clip about the same thickness as a large paper clip holds the handle to its shaft. It's shaped like an upside down "U" so it needs to be pushed straight up. Press the panel outward around the handle and you can just see the clip. Use a small thin screwdriver to locate the bottom tips of the clip and push it up. You may have to alternate from side to side but it will pop off. Grab it with a pair of needlenose pliers if you have to. The door handle willl now slide off - just pull it towards you.
b) Power window switch. Remove power window button by squeezing hidden tabs along the sides of the button. Again, you may have to push the panel outward a little and pry the switch to see the tabs. Wiggle it a little and the button will release. Pull it out and unplug the wiring harness.
c) Door panel. There are several plastic buttons which hold the panel on at the bottom and up the sides. Use a plastic putty knife to get behind panel and pop it out of the holes.
3. Once all trim fasteners are released, grab the door panel at the bottom and pull straight up to release it at the top. You may have to give it a quick upward tug to get it to release. Push the power window button wires through the mounting hole. Look at the panel buttons to make sure that all of them came off with the panel. If not, remove the remaining ones from the door and put them in their respective slots on the door panel. (Trying to re-attach the panel without the buttons installed on the panel will be frustrating.)
4. Outer handle removal.
a) Unclip the handle lock button / bar by turning the small tab and pulling the bar out of its slot. Hard to describe here but you'll figure it out once you see it.
b) Remove three bolts which hold the handle on the door. Note that one bolt is accessible from the outside of the door along the front jamb.
Replace handle and reverse the steps above.

Notes: Check the locking mechanism and make sure the door opens and closes before you reassemble the panel. Remember to orient the inner handle the right way before you re-attach its spring clip. (I've attached it upside down and it won't work!!!) . Also, be sure to feed the power window wiring harness back through the mounting hole before putting the panel back on.

Nov 06, 2012 | 2000 Mazda MPV

1 Answer

1992 Mazda mpv . Won't hold charge . Engine won't


The first thing to do is have the battery tested, just because you charged it doesn't mean it will stay charged if the cells are sulfated up or shorted.

Oct 02, 2012 | Cars & Trucks

1 Answer

Door won't close


Check to see if anything is restricting it from closing inside of the crevice where the wheel travels and locks. Sometimes debris from trees, dirt or rocks can clog it up.

Feb 22, 2012 | 2003 Mazda MPV

1 Answer

How do you remove the glove box from 2001 mazda mpv


I have a 2002 MPV, they say that you are to slide it to the left and pull the right pin out, then slide to the right and it will come out. I must have a 2001 assembly, this wasn't even remotely possible. After tinkering for a while I realized that the left side on the bottom has a "c" clip; just open the glove compt. door and give a good pull on the bottom left side, the whole thing will pop right out. Once you pull it out there will be a long horizontal clip in the back there, open that up (there's a release on the left) and your cabin air filter is hiding out in there. :)

Jan 25, 2012 | 2001 Mazda MPV

1 Answer

Rear door handle broken. Mazda mpv 2001. lock works fine.


The relay rod inside the door has broken (not likely), one of the retaining clips that hold it in place are broken (most likely) or the tab on the door handle assembly is broken (again not likely). to gain access you will have to remove the door panel. You did not say whether the handle you are having a problem with is the interior or exterior but to remove the door panel you will need to have the door open, you might want to purchase a Haynes or Chilton manual for your car to get the proper instruction if you have never removed one before.

Dec 12, 2011 | Toyota Cars & Trucks

Not finding what you are looking for?
2004 Mazda MPV Logo

Related Topics:

2,135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...