The interior door panels? for the most part the panels are of simple design, they sorta just 'pop' on and off, they are held on with plastic screws attached thru the metal interior of the door. start with the end closest to the outside edge of the door and with a plastic 'pop tool' (i forget the exact name for them but they are for removing headlights and skid plate bolts without damaging metal) or even a flat head screw driver with a folded shop towel over the edge to prevent damage to either panel, gently work under the panel all along the side. it should work loose in short order without much fuss, from there you can see the other panel screws and work around handles/manual window cranks.
How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html
----------
window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html
-------------
How to Remove Door Panels ?
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html
---------
How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html
-------
Vehicle door panel components?
http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html
-------
This will help.
Thanks.
Do not attempt to remove more than one pushpin at a time.
To install:
This procedure applies to both the front and rear door panels.
//
// 0)
preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i];
}
ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 30;
ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog'];
ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC';
ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data';
//]]>
var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos';
Remove the cover from behind the inside door handle by gently pulling it out to release the retaining tabs
Remove the pull cup retaining screw cover and...
... remove the retaining screw from the cup and lift the cup straight up out of the door panel
Remove the two sail panel/speaker grille retaining screws and...
... remove the panel/grille from the door
The door panel is retained to the door by 11 retaining clips
Carefully lift the door panel off of the door and...
... detach the electrical connectors from the switches and remove the panel from the vehicle
97 views
Usually answered in minutes!
×