Question about Chevrolet S 10

Open Question

Gm delco radio wont turn off when my 1994 chevy s10 is turned off

When i turn off my truck radio stays on

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
blueextc3221
  • 15935 Answers

SOURCE: delco radio in 95 blazer

hold in the "clock" button until the time comes up then turn use the volume and channel controls to adjust

Posted on Jan 08, 2009

Ad
ZJLimited
  • 17970 Answers

SOURCE: GM Radio Codes

Try this:

GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you get 3 digits on your display. This is the first 3 of 6 digits you will need, so write 'em down.
2. After doing step one and writing down the code, immediately press the AM/FM button to get the last 3 of the 6 numbers you'll need, and write 'em down. (if you wait too long between steps 1 and 2 and the LOC code displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell you to press "2" for Pontiac, press 206010 and hit the # key. He'll ask you for the 6 digit code that you've written down. Enter that and press the * key. He will then give you a code, and the option to get additional 4 digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio until you get the first two numbers of the code, then press the minute set button until you've entered the last two numbers. Immediately press the AM/FM button once the correct code is entered and the code SEC or "secured" will be displayed on the display screen. Now, just turn the radio on, and your ready to roll.

There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit code so that it won't get you in a pickle again! Just repeat step 4 and you should get a display screen that reads ---. This means the code is out, and you can now program your own code. Of course, once you
receive the 4 digit code from the GM recorded message, just keep it in a safe place, because you can use that same code again and again should you have any more problems with it in the future. Good luck, and yes, it does work.

Hope help with this.

Posted on Mar 18, 2010

  • 1 Answer

SOURCE: location of ignition module on 1994 chevy s10

My '94 s-10 Doesn't have a "distributor". Down on the passenger side of the block there are 2 "coil packs" each supplying the spark to 2 cylinders. These coil packs are bolted to the Ignition module which is bolted to the block. There are 3 different sets of wires that plug into it. After going at it the hard way(under the truck) I realized that if I raised the flap in back of the wheel I could get to most of the bolts easier. Hop this helps.

Posted on Mar 19, 2010

  • 1619 Answers

SOURCE: Delco factory Radio/CD player,it gives an err msg.and ejects CD

The laser in the cd player may be dirty or has gone bad and can no longer read the disc.

Posted on Apr 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the six digitcode682695 for 2,000 Chevy astro van delco radio. How do ifind the loc code for it



re: 2000 Chevy astro van delco radio unlock code 682695.

Good luck and please flag if HELPFUL". Thanks!

How to Unlock a Delco Radio - Instructions

1) Obtain the six-digit dealer code - yours is above. ( this doesn't apply: Contact your local GM dealer. If you explain the situation, most will provide the code to you. If they are not willing to provide the code, contact other GM dealers until you find one that will help you

2) Turn the ignition key to the "ON" position, without turning the engine over. Hold the preset buttons "2" and "3" for 10 seconds. The radio will display a three-digit code. Write this number down and then quickly press the "AM/FM" button. Three more digits will be displayed. These six numbers are the serial code for your radio.

3) Call the GM assistance hotline at 800-537-5140. Follow the prompts and select the brand of your vehicle. Enter the six-digit dealer code and then enter the six-digit radio serial code. The automated system will provide you with a four-digit code to unlock your radio.

4) With the ignition on, use the "Hour" button on your radio to input the first two numbers of the four-digit code. Use the "Minute" button to input the last two digits. Press "AM/FM" to set the code. The radio is now unlocked and ready for use.

(from link: http://www.ehow.com/how_6168368_unlock-delco-radio.html / By Leonardo R. Grabkowski, eHow Contributor)

Here's a related video:

http://www.youtube.com/watch?v=XO2UuBO9llY

Nov 23, 2014 | Cars & Trucks

1 Answer

Gm delco theftlock radio wont turn on?


You have to enter the theft code which was set into the radio. The owners manual will tell you how AS LONG AS YOU HAVE THE CODE. If you don't have the code, any GM dealer will help you out and call in to get your code. They will want to make sure you own the vehicle.

Jul 22, 2012 | Cars & Trucks

2 Answers

I have a delco electronics Audyssey de-a8000 mobile audio amplifier that came out of a 90's model s10 pick up. i would love to purchase a complete wire harness but at least get the wire config for it....


The only thing i can tell you is to email Mac@WonderBarMan.com Mac@WonderBarMan.com>

He is the only person that may be able to help you out. These delco systems are old and out of date.
Good luck to you, i would be glad to email him for you but suggest you do it, so as to not make me the mediator and to achieve faster results. Thank you.

FixYa Premium Support

Please accept solution and rate 1,2,3 or 4 stars Asked. Thank you.

Aug 01, 2011 | 1990 Chevrolet S 10 4WD

1 Answer

Need a code to unlock my radio for a 97 grand prix


Follow these steps to unlock your GM Delco Radio:
1. Turn the ignition ON (The Delco radio displays "LOC" or "INOP").

A. If your radio says "INOP" then you have entered too many wrong codes. You will need to run the vehicle for one hour or turn the key into the ON position for one hour before you can proceed to Step 2.

2. Looking at the face of your GM Delco radio, hold down the preset buttons 1&4 or 2&3 for approximately 10 seconds. The radio display changes from "LOC" to a three-digit number. Write this number down.

3. Press the AM/FM button. The radio display changes to another three-digit number. Write this number to the right of the first one.

4. You now have a six-digit number, the first three digits are from STEP 2 and the last three digits are from STEP 3, you will have a number like this (612-622).

A. NOTE: Saturn and GEO vehicles will only display a four-digit number. The fourth digit will be displayed half the size of the first three digits. Example: 2193.

Hope helps (remember rated and comment this).

Sep 02, 2010 | Pontiac Grand Prix Cars & Trucks

2 Answers

Delco factory Radio/CD player,it gives an err msg.and ejects CD


The laser in the cd player may be dirty or has gone bad and can no longer read the disc.

Apr 17, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

When i try to turn my radio on it says loc hoow do i unlock it?


Does your GM car or truck Radio display LOC and does not turn on? Chevrolet, Buick, Pontiac, GMC, Cadillac, Oldsmobile vehicles used a theft system to lock the radio when power is lost. This system was used from the ealy 1990's to the early 2000's.

Instructions:
  1. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code. If the radio says INOP, you will have to leave the key in the "ON" position, or let the car run for at least 1 hour before you attempt any unlock procedure. INOP means a secondary theft lock due to too many false attempts to unlock the radio.
  2. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down.
  3. Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. You will then need to call a 1-800 phone number with these numbers to get the unlock code. There are many sites on the internet that can get it for you- for a small fee. Or, try calling your local GM Dealer and ask for them to do it. Many times they will do it for free. It only takes a minute.
  4. Once you have the unlock code, enter it by pressing the MIN button until the display shows the last 2 digits of the unlock code, then press the HR button until the first 2 numbers or shown. Then press the AM / FM button to enter the code. The radio will now display SEC, and normal function is restored.
Also, its possible that you need RESET your GM Radio; this is the procedure: While performing maintenance on your car, you may disconnect the radio from the battery in your GM vehicle. GM cars contain Delco radios that are protected by Theftlock, which locks the radio after it has been disconnected from a power source. Iit can only be reset and unlocked with a car-specific security code. Identifying the security code for your GM vehicle is the only way to reset the car radio and disable the Theftlock protection device.

Instructions:
  1. Turn on your car. Your Delco radio will show "LOC" in the LED display.
  2. Press and hold down both the second and third preset buttons. Hold these buttons down for at least six seconds.
  3. Write down the two- or three-digit code that appears in the LED display.
  4. Press the AM/FM button on the radio.
  5. Write down the next two- or three-digit code that appears in the LED display. You should be left with either a four- or six-digit number. Turn off your car.
  6. Call the Delco radio automated customer support line at 1-800-537-5140.
  7. Press "1" and then press the pound sign. The automated voice should respond "Invalid code, try again."
  8. Enter the number 139010 into your phone and then press the "*" sign.
  9. Enter the four- or six-digit number you wrote down from Steps 3 and 5, and then press the "*" button.
  10. Write down the four-digit code given by the automated voice.
  11. Turn on your car. Enter the Delco unlock code using the procedure outlined by your GM owner's manual. Normally, the unlock code is entered with the "HR" and "MN" buttons on your radio.
  12. Press the AM/FM button. If you have entered the code correctly, your LED display will read "SEC" and the radio will be unlocked.

Also can check your Does your GM car or truck Radio display LOC and does not turn on? Chevrolet, Buick, Pontiac, GMC, Cadillac, Oldsmobile vehicles used a theft system to lock the radio when power is lost. This system was used from the ealy 1990's to the early 2000's.
jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:
  1. If your radio displays the word LOC, you can retrieve a set of factory numbers in the radio that enable you to get a backup unlock code. If the radio says INOP, you will have to leave the key in the "ON" position, or let the car run for at least 1 hour before you attempt any unlock procedure. INOP means a secondary theft lock due to too many false attempts to unlock the radio.
  2. Looking at the face of your GM Delco radio, hold down the preset buttons 1 & 4 OR 2 & 3 (Depending on year and model) for approximately 10 seconds or until a set of 2 or 3 numbers comes up on the display. Write the numbers down.
  3. Next press the AM / FM button. A new set of 3 numbers will now show. Write these numbers down. You will then need to call a 1-800 phone number with these numbers to get the unlock code. There are many sites on the internet that can get it for you- for a small fee. Or, try calling your local GM Dealer and ask for them to do it. Many times they will do it for free. It only takes a minute.
  4. Once you have the unlock code, enter it by pressing the MIN button until the display shows the last 2 digits of the unlock code, then press the HR button until the first 2 numbers or shown. Then press the AM / FM button to enter the code. The radio will now display SEC, and normal function is restored.
Also, its possible that you need RESET your GM Radio; this is the procedure: While performing maintenance on your car, you may disconnect the radio from the battery in your GM vehicle. GM cars contain Delco radios that are protected by Theftlock, which locks the radio after it has been disconnected from a power source. Iit can only be reset and unlocked with a car-specific security code. Identifying the security code for your GM vehicle is the only way to reset the car radio and disable the Theftlock protection device. jQuery('.intro .thumbnail').each(function(i,e){ jQuery(e).find('img').one('error',function(){ jQuery(e).remove(); }); });
Instructions:
  1. Turn on your car. Your Delco radio will show "LOC" in the LED display.
  2. Press and hold down both the second and third preset buttons. Hold these buttons down for at least six seconds.
  3. Write down the two- or three-digit code that appears in the LED display.
  4. Press the AM/FM button on the radio.
  5. Write down the next two- or three-digit code that appears in the LED display. You should be left with either a four- or six-digit number. Turn off your car.
  6. Call the Delco radio automated customer support line at 1-800-537-5140.
  7. Press "1" and then press the pound sign. The automated voice should respond "Invalid code, try again."
  8. Enter the number 139010 into your phone and then press the "*" sign.
  9. Enter the four- or six-digit number you wrote down from Steps 3 and 5, and then press the "*" button.
  10. Write down the four-digit code given by the automated voice.
  11. Turn on your car. Enter the Delco unlock code using the procedure outlined by your GM owner's manual. Normally, the unlock code is entered with the "HR" and "MN" buttons on your radio.
  12. Press the AM/FM button. If you have entered the code correctly, your LED display will read "SEC" and the radio will be unlocked.

Also can check 1999-Pontiac-Firebird-Owners-Manual (page 163), there are several information about to lock and unlock.


Hope this help (remember comment and rated this).

Apr 06, 2010 | 1999 Pontiac Firebird

1 Answer

2003 chevy S10. some gauges & light don't work & the radio only works when you turn off truck


When these gauges start going on GM autos it is almost always a new instrument cluster. On 2002 to 2006 GM's we replace 5-10 per week. (We have over 220,000 vehicles in our fleet)

Jul 04, 2009 | 2000 Chevrolet S-10

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...