Question about 2002 Pontiac Grand Am

1 Answer

The turn signals arnt working

  • they only work part of the time. someone told us it could be a flasher....could this be right?

Posted by on

  • 2 more comments 
  • Anonymous Oct 22, 2008


  • edean923 Oct 22, 2008

    when my turn signals decide not to work, I get them to work by turning on and off the emergency flashers. Does this "fix" yours as well? and where is there a signal relay? I heard from somebody you have to replace the entire lever, and that there is not a relay. Any ideas?

  • Anonymous Oct 27, 2008

    same thing happened, the part is $25 it is called the hazzard flasher module and it is attached to your hazzard button right above your radio. take off that trim and you have access to it. I paid $90 to fix it at a garage and learned what it was after. i say a 20 minute fix tops

  • ocnbtrfly25 Mar 05, 2009

    I had the same problem- turn signals only worked part of the time and the hazard lights would come on when I pushed the button but the clicking noise wouldn't stop regardless of if I had the button pushed or not. My mechanic thought it was the hazard button and replaced but turns out it was one of the wires behind the steering wheel or in the steering wheel and he put in a new wire and the hand shifty things that control the lights and the windshield wipers and I have not heard the noise sense!



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 92 Answers

It may be a flasher or the signal(multifunction) switch.

Posted on Oct 22, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Jeep Cherokee sport 1999 I put on a new turn

a fuse or a relay switch can do that

Sep 17, 2014 | Cars & Trucks

2 Answers

Turn right signal on and the flashers come on, sporadically

The combo turn signal/lights/cruise stalk (and anything else on there) is probably bad or rapidly headed that way. Not a cheap fix.

Mar 05, 2009 | 1993 Buick LeSabre

1 Answer

91 toyota corolla left turn signal stays lit up al the time. Right turn signal working okay. Bulbs for left ok. where is the turn signal flasher located for this model or is it not the flasher,s problem....

If the right side signals are working properly and you can hear the signal flasher clicking when the right side signals are selected, the flasher is not the problem. Its more likely you have a short to ground in the left side wiring somewhere.

Feb 21, 2009 | 1990 Toyota Tercel

2 Answers

Directional signals screwed up, but my 4 way flashers work.

For this modle and year the turn signal flasher should be mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located under the instrument panel in the module block, on the right side.
Hope this helps,

Feb 13, 2009 | 1995 Buick Regal

2 Answers

Turn signal flasher cant find it in car

I found it today.
It's way up under the dash to the right (looking from below) of the steering column. Mine was hidden by a bundle of wires. It is attached to the bottom a white part. (Maybe the fusebox.} You have to push hard towards the rear of the car and it will slide off.. I disconnected it from the socket first, it is held on by a clip.

'94 Concorde, same thing only different.

Jan 14, 2009 | 1997 Dodge Intrepid

3 Answers

Turn signals

replaced turn signal flashers and muti switch turn signal still won't work Why?

Nov 08, 2008 | 2000 Jeep Grand Cherokee

2 Answers

Where do I install the electronic flasher relay for the turn signals?

If the turn lights come on and don't flash, like mine did, I found the flasher behind the ashtray.If you can't reach it,there are only 4 screws holding the bracket (1/4 in.nut driver) that holds the ashtray.

Oct 27, 2008 | 1993 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8825 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides