Question about 2000 Toyota Land Cruiser

2 Answers

Dash light on 2000 Toyota Land Cruiser

The light on the dash when the truck is in "D" for drive does not go on. the other lights work when the transmisison is in any other position.
can this be replaced by reaching underneath or is this a labor intensive matter?

Posted by on

  • JaneTrades Oct 29, 2008

    Thanks for the solution. I hope when I actually look for the screws on the instrument panel that it is as easy as it sounds. If it is I will upgrade my comment to FixYa!

  • Anonymous Mar 25, 2014

    how can I replace the bulb

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 5,568 Answers

I confess instantly to being clueless :-( on this one. Some indicators use a 'shadow' arrangement that requires only one light source and the transmission setting is shown via a window that allows light to pass through to the position marking. Yours apparently uses individual LEDs or small lamps; it is is the former, it's an unusual failure, if it's a lamp, I have no idea how to access them. Sorry -   

Posted on Oct 22, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, i've read your problem regarding the light indicating the "D" position of the gear. it maybe the bulb itself, it maybe blown off. You could do it yourself by taking of the 2 lead screws attaching the main cluster of your odometer panel, then at its back you'll find small gray or black cap cover that holds the bulb. Look for the exact position of the "D" slot to see the blown bulb and have it replace by a new one. I hope this one helped. Have a good day... Riderkits_Toyota LC90

Posted on Oct 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Landcruiser amazon 2000 diesel 4.2 was driving today and all of a sudden the vehicle was in D for drive and was showing first gear on the dash, and wouldnt drive over 20mph and wouldn't change


the tcm. (trans control module) has detected a fault in the transmission. it won't change because its in limp home mode.
the vss sensor may have failed. let the dealer or transmission shop run a scan tool on it.

Oct 19, 2014 | 2000 Toyota Land Cruiser

1 Answer

Hazard lights not working, fuse checks out OK


if you have directional lights and no 4ways you need a( signal stat ) some are round some are square you will find it most likely under the dash board turn on the directional listen to ware the sound is cumming from you will find 2 of them 1 for directional the other for 4 way

Apr 24, 2011 | 2000 Toyota Land Cruiser

2 Answers

I have a Land Cruiser 2000 model HZJ105L diesel.


check glow plugs and timer...Make sure you have voltage at the glow plugs...

Sep 14, 2009 | 2000 Toyota Land Cruiser

1 Answer

2000 Land Cruiser Parking Brake alarm will not turn off.


check the parking brake switch if it is engaging and disengaging when you pull the the parking brake.

Apr 29, 2009 | 2000 Toyota Land Cruiser

1 Answer

Differetial locks for 94 land cruiser


91-97 Land Cruisers had a factory option for front and rear locking differentials. This is a seperate switch and is usually located to the left of US model Land Cruisers. The center dash button locks your transfer case differential changing your Land Cruiser from all wheel drive to four wheel drive depending if you have ABS or not this button either says ECT or Center Dif Lock. If you do not have the Front/Rear locking differential option then your Land Cruiser has open Front and Rear. Hope this answers your question.

Jan 19, 2009 | 1994 Toyota Land Cruiser

1 Answer

T-BELT light in dash of 78/79 cruiser ute


ok well its not behind dash untill later model i think from memory it should be in engine bay some where look around not sure but i know its not behind dash it may be on gear box as this only comes on when klm reach 100,000 and 200,000 and so fourth good luck

Sep 16, 2008 | 2000 Toyota Land Cruiser

1 Answer

T-BELT light in dash of 78/79 cruiser ute


You need to remove the dash and swop this screw into the other hole. tbelt1.jpg


Also the light should come on at 100,000km, this could indicate that your speedo has been clocked.

Sep 16, 2008 | 2000 Toyota Land Cruiser

1 Answer

Haed lights


All 4 lights is HIGH beam. The 2 that come on in 'LOW' are the low beams.

Sep 03, 2008 | 1990 Toyota Land Cruiser

1 Answer

2000 toyota land cruiser door power lock


This is normal if I'm reading this right. The door locks are supposed to pop up when you turn off the key when in "child proof" mode. The reading lamp is wired to prevent low battery conditions by only operating when the engine is running. Did you just get the car?

Jul 29, 2008 | 2000 Toyota Land Cruiser

Not finding what you are looking for?
2000 Toyota Land Cruiser Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...