Question about 1998 Mitsubishi Montero

1 Answer

Radio i have a problem with my pioneer radio in the mitstibishi. i checked one day the back of the radio and i took out the radio but i did not touch no wire and then i put it back in place than the sound jus turned off. like u can put it on the highest and not a word comes by from the cd or radio. so i checked all of the wire on the speakers and there is no shorten in them so wat happend?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check the connections on all the pins, If it is a plug and play adaptor, check your fuses, but most likely the speaker connections are slightly loose, which is causing the lack of sound. I find when removing stereos if the wires are shorter they disconnect, but stay in the housing.

Posted on Oct 22, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2007 chevy tahoe touch screen radio does not respond to touch. took it to dealer and they found no issues, it worked when i got it back but only for two days. is there a reset for the radio?

Recommend you look on a Chevy forum for this question as 99% of the time someone else has had the same issue and found a fix.


Oct 30, 2013 | 2007 Chevrolet Tahoe

2 Answers

No power to radio pontiac grand am 2004

Do you know how to do automotive electrical testing ? Following wiring diagrams , checking B+ voltage at different points along the circuit . Did you use a interface module with the aftermarket radio ? The GM radio is hooked to the class 2 serial data network . Your best bet , take it to a qualified installer .

Apr 04, 2017 | 2004 Pontiac Grand Am

1 Answer

Ever since I took out my battery and put it back in the radio hasn't work. None of the buttons work except the volume when a cd is in but nothing else works. It's a pioneer radio deh p7500mp.

Looks like it's the same thing that happens when I remove the power cord from my home hi-fi system... when I reconnect it it goes crazy on display mode till I reset the clock. In your case, the obvious difference is that it may have lost the clock time and memory presets.. see if retiming the clock and reprograming the tunner presets does the trick.. also check the memory fuse...usually the one on a pink wire.

Sep 28, 2012 | Cars & Trucks

1 Answer

1999 lincoln continental alt sense fuse keeps popping

it is a dead ground somewhere...if it started when radio was installed then thats where i would look again,could be something that was overlooked...good luck.

Aug 16, 2012 | 1999 Lincoln Continental

1 Answer

Radio for 2002 Bentley Arnage T

Be sure to check fuses. You may have a blown fuse. If have the owner's manual, check for fuse block diagram and check for one listed as radio. If fuse is at fault, may have loose wire that caused it to blow.

Aug 12, 2012 | Bentley Arnage Cars & Trucks

1 Answer

All my fuses blew at the same time

there is a live wire touching the car body somewhere! check it out quickly as I witnessed an electrical fire on a ford transit 2 days ago with the same fault.

look around the exhaust and back of the radio check all the wires you can see for signs of melting.

Hope this helps

Jan 15, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

No sound from new stereo

check the speakers in the rear deck, in the rear hatch or trunk, often the two wires that come out of the speaker touch if that happens it will short out the speaker drivers in the radio most times no permanant damage will occur. separate the wires so they do not touch,or touch the metal speker base, that may not be the problem but its a start..

Oct 16, 2009 | Hyundai Motor 1998 Accent

1 Answer

Installing cd player in truck and nothing works on it

You probably blew a fuse in the back of the radio, or in the fuse box. Check both to be sure. And remember, always disconnect the battery before you do something with the wiring harness.

Jun 12, 2009 | 1990 Ford F150

1 Answer

Replacing factory radio

I am not sure what kind OEM radio yu got? sometimes the factory radio is floating ground, you must becareful, do not touch any wireto your car body.

First check the speake wire, use a 9v battery touch the speaker wire + and -to find out which is which and then one by one connect to your OEM radio and turn on and find out if it is a correct side or front and back.

hope this can help you a little bit.

Jul 02, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

74115 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7188 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides