Question about 1998 Chevrolet Blazer

2 Answers

Replace the front turn signal light bulb

How do you replace the front turn signal light bulb on a 1998 Chevy Blazer

Posted by on

  • 1 more comment 
  • asivak Dec 24, 2008

    I have a problem to replace the bulb on left (driver's side) front turn signal on Toyota Camry'96 4 cyl. I anscrewed the lense assembly (just one screw), but wiring is to short to pull enough for reaching the socket.

    Please adwise.

    Thanks!

  • Anonymous Jan 02, 2009

    1999 Lexus ES300 Replace left front turn signal bulb

  • Anonymous Jan 14, 2009

    uplander 2007, front signal turn light bulb, driver side need to be changed.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 92 Answers

You have to go under the front of the car. very easy to fix.

Posted on Dec 15, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

You should have two tongues holding the main headlamp assembly, they are towards the inside of the engine compartement, slide them off upwards and wiggle the assembly and should come off, once off you'll have access to you signal light, hope it helps

Posted on Dec 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1998 Chevy Blazer and the left turn signals flash real fast. I took out all of the bulbs and it works normal(from the inside). I put one bulbs in and it blinks fast again. Help!!


The plug itself is bad. You can get them at autoparts stores. Look at it first, it may only need a minor adjustment of the tabs that make contact with the bulb.

Oct 04, 2014 | 1998 Chevrolet Blazer

1 Answer

Light bulb for turn signal under mirror 2006 chevy


not bulb led light part of mirror dealer, some auto stores or online parts

Jan 21, 2010 | 2006 Chevrolet Trailblazer

1 Answer

Driver side signal light


Change the bulb from the back. Just lay down and look up. Squeeze the nylon clip, and turn the socket counter clockwise, and it'll pop out.

Jul 06, 2009 | 1998 Chevrolet Blazer

1 Answer

Turning signals not working


The way the system works is:
The fuse supplies 12 volts to the flasher unit then leaves the flasher and goes to the turn-signal switch in the steering column.
When you set the turn-signal switch to turn right or left, the switch sends that 12 volts to the front and rear bulbs. The voltage goes through the bulb, lighting the bulb and goes to ground.
If any of these components are not good than the lights will not work.
Check the fuse and make sure it is good, the fuse will be located under the hood at the fuse center.
Let me know if you have a test light and we can proceed from there.
Regards,

May 09, 2009 | 2001 Chevrolet Blazer

1 Answer

I have a 98 Chevy Blazer, the left front turn signal blinks really fast. What should i do?


This usually means that you have a bulb burnt out. Check the left rear

Mar 03, 2009 | 1998 Chevrolet Blazer

2 Answers

1998 CHEVY BLAZER SOUNDS LIKE TURN SIGNAL IS ON BUT NOT


We had the same problem. Hubby replaced the multiswitch and that fixed it

Dec 16, 2008 | 1998 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

7,281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...