Question about 1994 Nissan Pathfinder

1 Answer

Hear clicking sound from Passenger window, but won't roll up or down

Hello, can you tell me where the drivers side power window relay is located? Here's the problem, When the window swith is pressed, you can hear a click, but nothing happens. I doubt it's the relay but wanted to start with the easiest first...I would believe more that the problem is in the door because after it got slammed shut, it worked intermittently, and now, not at all. You just hear the click of the relay. Any suggestions?

Posted by on

  • 2 more comments 
  • jwsolver Jan 15, 2009

    Thank you....

  • jwsolver Mar 01, 2010

    I suspected it was the motor as well, but wanted to make sure. I
    replaced it and the window works fine now.

    Thanks for the input!

  • Anonymous Mar 26, 2014

    I hear a click when press the window button but window will not move

  • Anonymous Mar 28, 2014

    Replaced both headlights. Driver's side is fine. Passenger side does not work. I can hear a clicking noise in relay/fuse box under hood which is located near the headlight. Did relay blow out during replacement? Which relay? There are 4 relays I believe.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 69,014 Answers

The clicking is the relay, that means the relay is ok, if it didn't click it would be defective, you most likely have a faulty power window motor.

Posted on Oct 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Passenger widows can only be rolled down or up from drivers side. Front passenger can sometimes roll down window but not back up


Bad switch on passenger side. Could also be switch on drivers door not letting power go to passenger door

Nov 30, 2014 | 2008 Ford F-150

2 Answers

Hi the passenger side window rolled down one day and wouldnt roll back up so we did some checking and discovered the motor was good so we figured,and was told it probably was the master switch on the...


Need to get a wiring diagram. Buy a book and follow the wiring schematic. It should help you out majorly. Can't really work on electrical issues without one.

Mar 17, 2013 | 2000 Oldsmobile Silhouette

2 Answers

Mazda 6 passenger window won't go up!!!


It sounds like it could be the window solenoid, or the window motor. It's unlikely the switches on both doors are bad. Check the solenoids and motors...

Oct 16, 2012 | Mazda Cars & Trucks

1 Answer

04 taurus Power Windows, passanger side goes down, not up, new mo


It is most likely the switch itself. since the down works that means that there is power going to the switch. So, the up position switch is probably worn out.

Jul 23, 2009 | 2004 Ford Taurus

2 Answers

2000 Ford expedition window problem


Sounds like you need a window motor. Try hitting in center of door trim panel to see if you can get it to work if so replace motor.

Jul 05, 2009 | Ford Expedition Cars & Trucks

2 Answers

Passenger elect window won't work


It likely has a bad window regulator.

Apr 05, 2009 | 2000 Chevrolet Silverado 1500

2 Answers

Right-side power windows will not roll down


well check window switch on driver side first does it roll down from that side / does it roll down from passenger side/ next if not do you hear the motor if yes its the switch in driver door that is bad / if you don here the motor then its the regulator/motor that needs replacing/ Please rate my response thank you very much

Jan 28, 2009 | 1991 Acura Legend

3 Answers

2000 GMC Jimmy SLE driver's power window


The same thing happened to my 1999 JMC Jimmy recently. I believe the problem is that your power window motor has most likely gone out or is starting to go out. The motor will need replaced. They are pretty expensive new. I went to a junkyard and got one for around 15 dollars. When mine went bad, I had rolled my window down about three or four inches and it stuck there. I took my door panel off and tapped on the motor while holding up on the window switch and got it to go up after a few minutes. I am replacing my motor today, I'll leave an update here about the outcome when I finish the job. I hope this information helps you.

Sep 27, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
1994 Nissan Pathfinder Logo

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

69014 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...