Question about 2003 Mitsubishi Lancer

2 Answers

2003 Mitsubishi Lancer

How to change the spark plugs of my 2003 lancer (not turbo)? Thanks in advance.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 11 Answers

So u have a CH/CG lancer

you would need to remove the two 10mm bolts from the coil packs and leads and then stick the smaller version of spark plug socket in remove them, bear in mind if u have a mivec motor the spark plugs MUST be Platinum :)

Posted on Jan 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Necesito una pieza que lleva debajo del cigueñal, se llama sensor cranche

Posted on Sep 16, 2009

1 Suggested Answer

  • 958 Answers

SOURCE: 2003 Mitsubishi Lancer

basic rules.

1 remove the cable.
2. use the right size socket and insert it to the plug.
3. loosen the plug and clean or replace.
4. tighten it back.
5. do it one at a time. it would be confusing to install the wires back if you pull them at the same time.

tnx 4 using fixya and tnx 4 asking,

drcool

Posted on Oct 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 lancer crank not start new plug new coil new crank sensor no spark


Does this model have an ignition module? If so, they can be tested at most parts stores.

Feb 13, 2015 | 2003 Mitsubishi Lancer

1 Answer

Firing order


2003 Mitsubishi Lancer 2.0 liter SOHC L4
and
2003 Mitsubishi Lancer Evolution 2.0 liter DOHC Turbo L4

aebcb80.gif

Hope helps.

Jul 31, 2010 | 2002 Mitsubishi Lancer

1 Answer

My lancer has engine hesitation, when i hit the


good day Sir, try to check the fuel filter and maybe the spark plugs i hope this tips will help you.

Jul 05, 2010 | 2003 Mitsubishi Lancer

3 Answers

2002 Mitsubishi Lancer won't run. No spark out of


YOUR CAR ONLY HAS COIL PACKS. CHECK VOLTAGE AT HARNNESS, IF OK REMOVE COIL PACK FROM SPARK PLUG REMOVE BOOT CHECK FOR VOLTAGE THERE, IF NONE POSS. COIL PACK.

Nov 04, 2009 | 2002 Mitsubishi Lancer

1 Answer

My 2003 Mitsubishi Lancer Jerks and sometimes loses power. What can it be?


This could be just a problem with the ignition. Check if all the plugs are getting sparks by pulling one at a time the hi tension wire that covers the spark plugs while the engine is running. Check also the rubber plug, the hi tension wire itself. If all checks out you may want to inspect the ignition coil and the fuel filter if it needs replacing.

Aug 15, 2009 | 2003 Mitsubishi Lancer

2 Answers

Mitsubishi Lancer OZ Rally 2003 hesitates while driving


before anything i had the problem and this is the way i solved it ... the lancer has 2 ignition coils in 2 cylinders what you do is take the iginition coil out of the cylinder that is misfiring and change it to another cylinder and put the car on the odb reader again it should change location of misfire .. then that would tell you that its the ignition coil thats bad i ended up getting my coil at the dealer for $110 ebay has some aftermarket pairs for $100 so you can get 2 now for the price i paid for 1 that will solve the problem guaranteed owne d a lancer for 5 years know the ups and downs to them

dirtyjerz908 at GMail.com hit me up

Feb 16, 2009 | 2003 Mitsubishi Lancer

1 Answer

Mitsubishi spark


NGK Laser Platinum- they are a little on the expensive side but its well worth the money. Good Luck

Dec 20, 2008 | 2003 Mitsubishi Lancer

1 Answer

2003 Mitsubishi Lancer


basic rules.

1 remove the cable.
2. use the right size socket and insert it to the plug.
3. loosen the plug and clean or replace.
4. tighten it back.
5. do it one at a time. it would be confusing to install the wires back if you pull them at the same time.

tnx 4 using fixya and tnx 4 asking,

drcool

Oct 21, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
2003 Mitsubishi Lancer Logo

965 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...