Question about 2003 Mitsubishi Lancer

1 Answer

No heat from Heater 2003 Lancer

I cannot feel any heat coming from heater. HELP

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Check the heat selector is too tight, then look under the driver side on the right to check the white heat selector is jam. You can see a black cable connected to it. Turn the heat selecter knob and check see whether it move freely. good luck.

Posted on Oct 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The knob for the heat turns but do not switch over to heat


The cable that flips the heater valve has become bent and will always bind until it is replaced. If twist the knob back and forth gently you can work the knob over to the heat side . The bad news , it is easy to turn the heat off , but it will be tricky to finesse the the heater back on again.

Nov 07, 2010 | 2003 Mitsubishi Lancer

1 Answer

Heat not working


Try locating the heater hoses. Start with the vehicle cool and turn it on and wait till the engine temperature reaches the correct temperature. This should send fluid through the heater hoses. Feel the heater hoses for a change in temperature. If there is no change in heat after a while the problem is in your thermostat. If one heater hose is hot while the other is not than the problem is in the heater block. If both hoses are heating up then the problem is probably in the climate control knobs or wiring that controls the blend doors or may even be the blend doors are broke and are not opening correctly to allow heat into the vents. This could also be a problem if the ac does not get cool either.

Oct 23, 2010 | 2003 Mitsubishi Lancer

2 Answers

AC/Heater control valve :Lancer 2003 Misubishi


The sliding switch on the console is stuck in the cold position and the knob is pulled off. Use pliers to jiggle the switch as best you can. Feel under the center console and you probably will find the cable that is hooked up to the flapper. You'll know because when you jiggle the cold/heater switch at the upper console, the cable will move slightly. At the hookup of the cable to the flapper down under the console (passenger side) try to work the flapper loose to the open (or close) position. At the same time work the sliding switch (with pliers). The flapper will come loose and function properly. Try not to knock of the AC button like I did in the process. It flew off some where under the passenger seat. I'll find it sometime before summer. Ha.

Apr 21, 2010 | 2003 Mitsubishi Lancer

3 Answers

I have no heat in my 2003 Mitsubishi Lancer. When


The cable that pulls the cool/heat switch on the a/c gets weak and it doesnt allow the dial to switch over to heat. You can see that cable and the way its supposed to work on the right side of the gas pedal over it. I usually just use my foot to push that switch over to heat and reach with and pull on it with my right hand to cool.

Jan 08, 2010 | 2003 Mitsubishi Lancer

1 Answer

No heat is there a fuse 2003 f250 is there a fuse for heater


i don't know realy if there is a fuse (though i doubt it) but issues with heatting may be this will help.

If the carpet under the heater core is damp, or if antifreeze vapor or steam is coming through the vents, the heater core is leaking.
Remove it and install a new unit (most radiator shops will not repair a leaking heater core.
If the air coming out of the heater vents isn't hot, the problem could stem from any of the following causes:
  • The thermostat is stuck open, previnting the engine coolant from warming enough to carry heat to the heater core. Replace the thermostat.
  • There is a blockage in the system, Preventing the flow of coolant through heater core. Feel both heater hoses the firewall. They should be hot.if one of them is cold, there is an obstruction in one of the hoses or in the heater core,or the heater control valve is shut. Detach the hoses and back flush the heater core with a water hose. If the heater core is clear but circulation is impeded, remove the two hoses and flush them out with a water hose.
  • If flushing fails to remove the blockage from the heater core, the coremust replaced.

Nov 27, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Heater not working (no heat)


If u have issues with heatting may be this will help.

1- If the carpet under the heater core is damp, or if antifreeze vapor or steam is coming through the vents, the heater core is leaking.Remove it and install a new unit (most radiator shops will not repair a leaking heater core.

1 - If the air coming out of the heater vents isn't hot, the problem could stem from any of the following causes:
  • The thermostat is stuck open, previnting the engine coolant from warming enough to carry heat to the heater core. Replace the thermostat.
  • There is a blockage in the system, Preventing the flow of coolant through heater core. Feel both heater hoses the firewall. They should be hot.if one of them is cold, there is an obstruction in one of the hoses or in the heater core,or the heater control valve is shut. Detach the hoses and back flush the heater core with a water hose. If the heater core is clear but circulation is impeded, remove the two hoses and flush them out with a water hose.
  • If flushing fails to remove the blockage from the heater core, the coremust replaced.

Nov 19, 2009 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Need to replace heater core in 2003 CE lancer. require assistance with removal procedure/method


very large job by the look of it, can download workshop manual from pdftown.com
degas air cond, drop coolant, remove dash, reomve front seats, remove console, remove heater and evaporator case assembly then get to replace heater core.
as i said big job.

Jun 21, 2009 | 2002 Mitsubishi Lancer

1 Answer

2003 lancer oz No heat at idle


make sure the coolant level is all the way full

Feb 05, 2009 | 2003 Mitsubishi Lancer

2 Answers

2003 Toyota Echo heat not working. Fan, but no heat.


There is a valve on one of the heater hoses that allows heated water to flow through the heater core when you select heat. With heat selected and car warmed up check to see if both of the hoses feel warm. If not then water is not flowing through heater core and valve may need replaced or heater core is stopped up.

Dec 23, 2008 | 2003 Toyota ECHO

Not finding what you are looking for?
2003 Mitsubishi Lancer Logo

Related Topics:

834 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...