Question about Dodge Ram 2500

1 Answer

Hemi engine missfires smeel alot of gas no engine codes we hooked up to scanner and nothing shows

Posted by on

  • Anonymous Nov 11, 2008

    code comes up 500 (speed sensor) changed that fixed for a minute but came back



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Dodge Master
  • 77,169 Answers

If the engine misses there will be codes, if there are not the PCM (computer) must be defective.

Posted on Oct 21, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2015 Ram Sport Hemi has a hesitation or lugging at 1300 rpm after that its fine. it has done this since almost new. Dealer says no codes come up so it must be fine. Anyone know anything about this?

Cud hav a tsb or bullitin. Codes r not everything..need to hook it to a scanner that reads values . Go to a privateshop. Warranty is stil good by law. will show best mechanics

Aug 31, 2016 | Dodge Ram Cars & Trucks

1 Answer

Where fuel regulator is located on dodge ram 1500 hemi 5.7 2006

regulator is in the fuel tank as part of the pump system. this is a return less fuel system, as such this is were they have put the regulator.

Jan 23, 2015 | Dodge Cars & Trucks

1 Answer

How to fix missfire in cylinder one

Without testing we'd only be guessing , your best bet ,take it to a qualified repair shop that has the diagnostic skill's an testing equipment . Hooking up a professional scanner .
016 Engine Misfire Misfire Scan Data

Nov 23, 2017 | 2000 Chevrolet Venture

1 Answer

1999 jeep grand cherokee.uses alot of gas idals fuel filter.blowing black smoke.hit the gas.and it will get away from you...need help...

Can be a bad O2 sensor. Check with a scanner which shows live data the 1-1 and 2-1 (upstream) sensors. Good sensors show a rapidly fluctuating voltage from 0.2 to 0.8 V. When the sensor has a steady voltage, then its most probably bad. There is no check engine light and no fault codes set?

Jul 18, 2013 | 2000 Jeep Grand Cherokee

1 Answer

Service engine light on alot,was told it might be because of gas cap or pollution control problem. Pollution sensor.

You need to have it hooked up to a scanner or a code reader at the very least to find out what codes you have. There are many causes that make the light come on and you can't tell what why without a scanner or code reader. Some part stores will plug in and read the codes for you. AAmco advertises that they will hook your car up to a scanner for free to retrieve codes for you.

Apr 30, 2011 | Chevrolet Blazer Cars & Trucks

2 Answers

I have an 01 hyundai accent gl 4 door 1.6 dohc. timing belt broke at 106,000 miles and bent some valves. got an engine out of an 03 accent 1.6 same everything with 35,000 miles. pulled old and put in 03...

The 2 components that I would suspect would be the Coil pack and the Cam sensor.
I had a similar issue on a Sorento. Intermittent miss on one of the cylinders. The Coil pack was bad. When I replaced it, there was a burnt smell to the bad one. It sounds like things were a bit bumped around with this engine as the O2 sensor was bent. The Coil packs are very fragile.
Hope this helps. God Bless

Apr 07, 2011 | 2001 Hyundai Accent

1 Answer

Chevy suburban 5.3 2006 random missfire on all cylinders

Have you used all the gas that was previously in the tank, It sounds like you have a slight water in the gas. If you haven't used any gas since it started this, then I would drain it out and re-fill it. Also what type of plugs are you running, this will have an impact on how the engine performs. Some people use the most expensive platinum plug and the engine will only perform with the mid platinum or the OEM. I have seen a lot of cars like this and once the plugs are changed to a OEM or a little better plug, the problems go away. Good luck.

Apr 06, 2010 | 2003 Chevrolet Suburban 1500

2 Answers

I have a 2003 dodge ram 1500 hemi im having trouble with the truck at 40-50 mph alot of jerking and no power ran codes and they said misfire at all cilenders and misfire on #6 piston and air intake running...

If you have hot air going into your engine you will have a bad fire. You could try the plugs and wires to see if it helps but it sounds like you have an intake leak somewhere. To check for a leak start your truck and open the hood and listen for hissing sound. Also check your air filter and make sure that the intake pipes are tight.

Mar 02, 2010 | 2004 Dodge Ram 1500

2 Answers

Number 1 cylinder misfire

No the only thing the san would show is a missfire, you need to test the injector and make sure it is getting fuel to the cylinder

Nov 11, 2008 | 2000 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides