Question about 1999 Chevrolet S-10 Pickup

2 Answers

1999 Chevy S10

I need A diagram on how to remove the heater core.

Posted by on

  • sister_bearr May 11, 2010

    can u send me a diagram

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Drop steering colum,remove upper vent cover,speaker grills to acsess screws remove dash completely,remove right front wheel well (just drop it down)then remove the 2 bolts on fire wall behind the rt side exaust manifold.cut hole in the a/c box for access of upper bolt,remove nut off stud next to heater hoses,remove heater box,take apart,install new core

Posted on Nov 09, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Just pull the dash back a little by undoing all the bolts and screws, its going to be a tight fit find someone with small hands.

Posted on Oct 24, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: heater core

At this link to the Ohio Public Library System

enter the generic library card number

123456789

select:

Public Library of Cincinnati and Hamilton County

scroll down and select:

Auto Repair and Reference Center

then you can select the year, make, model, engine, etc.. of your vehicle and access the full repair manuals, wire diagrams, service bulletins, specifications, etc as you need them

TONS of great repair info for LOTS of vehicles

Posted on Oct 26, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Heater core replacement 98 chevy S10 2.2L engine


Tyrone, Check the attached links,instruction and guides, the last link has some very good info. and pics. on S10 heater core replacement. Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Heater core replacement 2000 S10 4 3L slideshow picture
How to Change Heater Core on 1994 Chevy 10 Blazer GMC Jimmy Oldsmobile...
98 GMC Jimmy Heater Core Replacement Video Diary
Heater core replacement procedure 99 S10


Jun 16, 2016 | Cars & Trucks

1 Answer

Need a diagram for replacing heater core on 1969 f-250 defrost heater


You have an easy one. Follow the heater hose to the firewall. Remove them. remove the bolts holding the core in place and pull out the core. Reinstall. Newer ones, you have to remove the entire dash.

Nov 07, 2015 | Cars & Trucks

1 Answer

Need to back flush heater core on 1999 dodge stratus where is hoses located


Regarding this types of problem,i suggest you to go through this help links.Click the link below to go through the procedure and troubleshoot the problem :----HOW TO REPLACE AN UPPER RADIATOR HOSE

http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-upper-radiator-hose.html

-------------
HOW TO REPLACE A LOWER RADIATOR HOSEhttp://schematicsdiagram.blogspot.com/2011/07/how-to-replace-lower-radiator-hose.html
----------How to Flush Heater Core?http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html
------------

For heater core replacing procedure. I suggest you to go through this related help links.Its all complete step by step procedure: ----How to replace heater core for All car models?

Click the link below: ---

http://technoanswers.blogspot.com/2011/11/how-to-replace-heater-core-for-all-car.html

--------------
How to Flush Heater Core?

http://schematicsdiagram.blogspot.com/2011/12/how-to-flush-heater-core.html

---------------
How to Remove Heater Core ?

http://howtobyme.blogspot.com/2011/12/how-to-remove-heater-core-on-2008-honda.html
Heater Core Replacement?

http://howtobyme.blogspot.com/2011/12/honda-heater-core-replacement.html

------------
To replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on.html------

How to replace heater core?http://technoanswers.blogspot.in/2012/02/how-to-replace-heater-core-on_10.html
How to replace heater core on Buick Regal?

http://howtobyme.blogspot.in/2012/02/how-to-replace-heater-core-on-buick.html
----------This will help.Thanks.

Feb 16, 2012 | 1999 Dodge Stratus

1 Answer

Need to replace heater core? how do i remove old one and replace new one?


Here are the instructions with a diagram. If you need to enlarge the diagram save it to your picture files and then enlarge it there.

1. Disconnect battery ground cable, then drain cooling system. See: Engine, Cooling and Exhaust\Cooling System\Service and Repair

2. Disconnect heater hoses from heater core. Plug heater hoses and core fittings to prevent coolant spillage.


3. Remove bolt located below windshield wiper motor, attaching left end of plenum to dash panel.


4. Remove nut attaching upper left corner of evaporator or heater case to dash panel.
5. Disconnect vacuum control system supply hose from vacuum source, then push grommet and hose into passenger compartment.

6. Remove all instrument panel retaining screws and pull instrument panel back as far as possible without disconnecting any wire harnesses.
7. Loosen right door sill plate and remove side cowl trim panel.

8. Disengage temperature control cable housing from bracket on top of plenum. Disconnect cable from temperature blend door crank arm.

9. On models w/Automatic Temperature Control (ATC) , remove cross body brace and disconnect wiring harness from temperature blend door actuator and disconnect ATC sensor tube from evaporator case connector.
10. Disconnect vacuum harness at vacuum connector near floor air distribution duct.

11. Disconnect white vacuum hose from outside recirculating air door vacuum motor.
12. Remove two hush panels.

13. Remove one plastic push fastener retaining floor air distribution duct to left end of plenum. Remove left screw and loosen right screw on rear face of plenum. Remove floor air distribution duct.

14. Remove two screws from rear side of floor air distribution duct to plenum. To remove right screw, it may be necessary to remove the two screws attaching lower panel door vacuum motor to mounting bracket.

15. Remove push fastener attaching floor air distribution duct to left end of plenum, then remove floor air distribution duct.
16. Remove two nuts located along lower flange of plenum.
17. Carefully move plenum rearward, so that heater core tubes and plenum case upper stud clear openings in dash panel, then remove plenum from vehicle by rotating upper portion of the plenum forward, down and out from under instrument panel. It may be necessary to carefully pull lower edge of instrument panel rearward while plenum is being removed from behind instrument panel.
18. Remove retaining screws from heater core cover, then the cover from plenum assembly.

19. Remove retaining screw from heater core inlet and outlet tube bracket.


Heater core removal and installation diagram.




emissionwiz_78.jpg

20. Pull heater core and seal assembly from plenum assembly.
21. Reverse procedure to install.

Jan 06, 2011 | 1993 Mercury Grand Marquis

1 Answer

Im looking for a diagram of heater core replacement procedure for a 1993 chevy s10 truck


Haynes manual has exactly what you need and is only $20(approx) and has many, many, many more diagrams.

http://www.haynes.com/products/productID/243

Sep 26, 2010 | Chevrolet S 10 Cars & Trucks

1 Answer

Diagram need to remove heater core


I need a diagram to dismantle a heater core for a 93 volkswagon

Aug 24, 2010 | 1995 Volkswagen Jetta

1 Answer

Diagram on how to replace heater core in 99 expedition


Removal & Installation 1997-2002 To Remove:
NOTE: Heater core must be vacuum leak tested before it is remove from vehicle if a heater core leak is suspected.
  1. Drain engine coolant.
  2. Remove instrument panel.
  3. For 5.4L (4V), if quipped, remove junction splash shield.
  4. For 5.4L (4V), if quipped, disconnect starter relay cable. ford-03-00-3579.gif

  5. For 5.4L (4V), if quipped, remove junction block bracket.
  6. Clamp inlet and outlet heater hoses.
  7. Disconnect heater hose from heater core by gently pressing it toward heater core.
  8. Remove A/C plenum demister adapter.
  9. Disconnect vacuum line.
  10. Remove 13 plenum chamber top screws.
  11. Remove blend door assembly from case.
  12. Remove heater core.
To Install:
NOTE: If needed, clean and lubricate coolant hoses with plain water.
ford-10-00-3098.gif

  1. Install heater core.
  2. Install blend door assembly to case.
  3. Install 13 plenum chamber top screws.
  4. Connect vacuum line.
  5. Install A/C plenum demister adapter.
  6. Connect heater hose to heater core.
  7. Release all clamps from inlet and outlet heater hoses.
  8. For 5.4L (4V), if quipped, install junction block bracket.
  9. For 5.4L (4V), if quipped, connect starter relay cable.
  10. For 5.4L (4V), if quipped, install junction splash shield.
  11. Install instrument panel.
  12. Refill engine coolant.
prev.gif next.gif

Aug 21, 2010 | Ford Expedition Cars & Trucks

Not finding what you are looking for?
1999 Chevrolet S-10 Pickup Logo

447 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...