Question about 1984 Chevrolet S-10

1 Answer

1984 S10 wipers will not work.

Fuse is good, can't find any wiring breaks, wipers will not work. Is there another fuse block? Thanks

Posted by on

  • twostreams Nov 04, 2008

    I found the problem my self but maybe will help others by posting the solution in this case. One of the mounting bolts for the wiper motor has a grounding washer on it that contacts the housing. There was corrosion in this area, once cleaned it worked fine.

  • StarKeeper May 11, 2010

    have you checked the vaccuum lines that run to it?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Use a 12 volt tester an check the wires at the motor if you have power there than its probably your wiper motor

Posted on Jan 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My rear wiper for my Isuzu rodeo 2000 suddenly stop work, what could possible be the cause? I have check my fuse and the motor and those are good.

Pull the interior panels and trace the wire loom. Focus on the area where it bends with the hinges. Many vehicles are prone to wire breakage here. If you don't see obvious, broken wires, probe them with a voltmeter as they can sometimes break inside without breaking the insulation.
Once you've found any breaks, reconnect with crimp connectors and wrap with electrical tape to secure everything.
good luck.

Dec 02, 2016 | 2000 Isuzu Rodeo

1 Answer

Hi - I have 1 2008 Acura MDX and suddenly the wipers came on and won't shut off. (Stuck in intermitten mode.) Also the HIGH speed option for the wipers also isn't working - it just stays on standard speed....

Front wipers.
they all guess, do you want me to guess, too? surely not.
or test?. we can use a voltmeter to find this.
what we do is look at the schematics at
and its all clear. a simple road map;

Sticking on possibles.
the fuses are underhood. fuse 11 and 31
bad motor , internal keep alive cam switch stuck on,
will cause continuous wiper.s

so will motor colored wires green or blue hot full time
will keep motor going full time (any voltmeter, easy check)
12vdc is bad, 0v good (wipers off)
next and last is that wiper relay in hood fuse box, shorted. (pull it out see if they shut off?)
if the relay is good then its input is wrong. the control block.

the combo switch wipers on , sends a CAN buss digital commands to the MICU control block, this i turn powers up the wiper relay.
the MICU has a diagnostic port,and can be tested at the dealer
or errors.

if the relay coil pins are hot all the time, then the MICU /combo side is failing, if not, the problem is the relay ,if its output is hot all the time.
how is that?

Oct 22, 2013 | Acura MDX Cars & Trucks

1 Answer

I have 2002 ford escape and the windshield wipers wont work what could be the problem

Fuses, disconnected power, or a bad wiper motor - check the connections on the wiper motor - make sure wires are not worn and frayed so there is a good solid connection - check you fuse block the fuses should be identified in the manual or on the fuse panel door. If neither of those are the issue go to AutoZone and ask for current check on the wiper motor

Jan 13, 2013 | Ford Escape Cars & Trucks

1 Answer

Windheild wiipers stopped working, is it a fuse?? HELP

First check the fuse block and test the fuse marked wipers. If it is good disconnect the wiper motor connection and turn the wiper switch on. Using a multimeter test the hot wire to see if power is going to the wiper motor. If yes you have a bad motor. If no test between the motor connection and the fuse block.

Jan 03, 2011 | 2003 Dodge Durango

2 Answers

My windshield wipers don't work. How can I rule out the fuse?

locate the fuse (owners manual will give location) and visually inspect it if it is blown you will be able to see a break in the metal in the fuse

Dec 23, 2010 | 1999 Mercury Grand Marquis

1 Answer

Front wipers do not work

Have you check any fuse related to the wipers, in the junction block and power dist center,JB fuse 6, if the washers work the fuse is good, this will need some test light use, multi function switch on column, pin 4 on connector , dark/blue should have 12v to it,if not ,open power to switch,red/gray wire coming out is to wiper, should be power there when turned on, if not, replace the mfsw,if power, go to the wiper motor and check same wire for power, if there replace the motor, if not, open circuit to motor. GOOD LUCK, RDJRP

Dec 25, 2009 | 2000 Dodge Durango

2 Answers

2001 Ford Focus ZX3 rear window wiper and dashboard trunk release quit working at the same time. Does this suggest a cause and solution? For example, is there a common fuse or wiring element that they have...

possible, check all the fuses, also the wiring going into the rear hatch, ive repaired a couple, the wiring breaks causing the defogger and wiper and release to stop working the wiring runs next to the latch,but start with the fuses first.good luck.

Dec 16, 2009 | 1999 Ford Explorer

1 Answer

Ac and wipers dont wok and tied together

fuse block on left side of dash fuse 17 is for wiper fuse 20 a/c when they dont work test for power on these two fuses if no power look on back of fuse block feed wire may loose

Jun 25, 2009 | 1999 Chevrolet S-10 Pickup

1 Answer

2002 Buick Rendezvous - Rear Wiper, Back Up & Rear Plate Lights

look for rear wiper fuse and relay.because both circuits is tie together . look in glove compartment for the manual .it will show where all fuses and relays located.

Mar 17, 2009 | 2002 Buick Rendezvous

2 Answers

Wipers and Heather

If the fuses are ok then check your earth connections. Make sure they are clean and secure. Have you had a test meter on the wiring to these components?

Nov 27, 2008 | 1991 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

344 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides