Fitting a Tow Bar

2002 Hyundai Santa Fe 2 7L coolant temp sensor location Google Search//2002 Hyundai Santa Fe 2 7L coolant temp sensor location Google Search Here are 2 locations with pictures. I found them thru Google in 2 minutes. You should be able to do something with them.

Take a look at this picture. There should be a slot or square "hole" in the arm of the tensioner....I will also attach a link so you can see how and where this is at.

Refer to engine fitting manual for details.

for this and all future questions


http://cgi.ebay.com/ebaymotors/2003-HYUNDAI-SANTA-FE-OWNERS-MANUAL-_W0QQcmdZViewItemQQhashZitem4154f3c5e4QQitemZ280598136292QQptZMotorsQ5fManualsQ5fLiterature

Here is the site.
http://www.pdfee.com/2002-hyundai-santa-fe-gl.html

hi from uk the rear brake calipers pistons have to be rotated and pushed backwards into the calipers fully so as to enable new pads to be fitted there is special tool for this to make job easy and if you check E BAY garage/tools and equipment pages there are numerous types and different prices dependant on makers ? however you can improvise/make a tool using a a 1/2 inch square drive socket and t/bar +short extension look at piton and you will see it has slots ? cut away an old socket to provide teeth to fit these slots ? then you can both push and rotate c/wise the piston back into caliper or you can buy the tool ? from motor supermarket if you have time ? hope this helps

well there are two ways to solve this. you can either A let uhaul install one. not that pricey and pretty good or B buy one and use the instruction

here is a site for a front tow bar
http://www.google.com/products?hl=en&q=tow+bar+for+a+hyundia+santa+fe&um=1&ie=UTF-8&sa=X&oi=product_result_group&resnum=4&ct=title


here is one for a trailer hitch
http://www.google.com/products?q=trailer+hitch+for+a+hyundia+santa+fe&btnG=Search+Products&hl=en&show=dd




good luck

Jason

no fmm signal and am static more than usual antenna is disconnected

If its an auto trans ,a trailer! A standard, you will need to buy the propper harness. This would enclude wiring the lights in too! Frankster016