Question about 1997 Pontiac Sunfire

1 Answer

1997 Sunfire Back rightside window busted need to know how to get inside panel and wnidow crank off. Thanks Lewis McAlexander lmcalex@ms.metrocast.net

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

You need to get a door and door panel removal tool. Once you have removed the crank there is a couple of screws on the door arm rest..remove them and using the door panel removal tool..remove the door panel. you may have to lift up on the panel to remove it...

Posted on Nov 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove a manual window winder from a 1997 mitsubishi magna sedan


There is a spring clip (kinda like a c-clip) underneath the crank handle, holding it fast to the stub shaft it sits on. There is a special hand tool made for window crank handle removal-a couple of dollars should buy one. But you can also use a rag to get the handle off. Slip the rag underneath the edge of the crank handle, get it between the handle and the door panel, and saw the rag back and forth under the handle. The rag will catch the ends of the c-clip and push them back so the handle can be removed. You may have to slip the rag around the handle till you catch the ends of the spring clip.

Nov 14, 2012 | 1997 Mitsubishi Magna

1 Answer

How do you take off the window crank handle to get the inside door panel off.


Please see my tip at http://www.fixya.com/cars/r6065762-removing_door_panels . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Use a paper clip to form a small hook--see picture at above post.

Dec 07, 2010 | 1999 Pontiac Sunfire

1 Answer

Diagram serpentine belt pontiac sunfire 1997 2.2


My apologies for the delayed response.
I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.
I do not know if you still need this information, but I am answering it either way.
CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks.

http://www.2carpros.com/car_repair_information/year/1997/make/pontiac/model/sunfire/1997_pontiac_sunfire_drive_belt_routing_diagram.htm

Dec 26, 2009 | 1997 Pontiac Sunfire

1 Answer

Manual window crank spining but window will not go up


There is a retaining pin or spring on the back side of the handle. Some handles have a ring molding that can be pushed back to revel the securing pin. You need to push the pin or spring to release the handle.

May 07, 2009 | 2001 Hyundai Elantra

1 Answer

Need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter


Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger

May 06, 2009 | Pontiac Sunfire Cars & Trucks

1 Answer

I need the belt diagram for a 1997 pontiac sunfire 2.2L for the drive belt(serpentine)


My apologies for the delayed response.
I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.
I do not know if you still need this information, but I am answering it anyway.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks.
-

http://www.2carpros.com/car_repair_information/year/1997/make/pontiac/model/sunfire/1997_pontiac_sunfire_drive_belt_routing_diagram.htm

Mar 15, 2009 | 1997 Pontiac Sunfire

1 Answer

Inside door panel removal


u need a window crank remover tool get at ny parts store

Feb 25, 2009 | 2001 Pontiac Sunfire

2 Answers

1997 Sunfire Stalling Out


has nothing to do with baterry i am a mechanic from cochrane i would check fuel pressure or spark when it dies may be a crank sensor or ignition module

Jan 11, 2009 | 1997 Pontiac Sunfire

1 Answer

My 1997 sunfire wont start. the engine will turn over.


its a sunfire , have a buddy sit in your car and you go to the back have him turn the key to the on position... not the run position and listen for a buzz or whiiirrrrrring sounds, do this several times if no noise chances are your fuel pump is dead, a common chev problem, if it has no noise you can try giving it a few good whacks where the fuel pump is located at the tank and try again more often than not this will get your fuel pump buzzing again and then you will know if your problem is at least in the front or the back..
yadidimean
Thanks Shawn

Jan 05, 2009 | 1997 Pontiac Sunfire

Not finding what you are looking for?
1997 Pontiac Sunfire Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...