When I purchsed the can only 4 months ago the Infotanment panel was not working at all, now the door locks on the door are dead. When idoling at a stop sign the car alarm goes off. The hazard only work when the alarm goes off. Any Ideas?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Panel is easy to remove with just 2 screws (#30 bit) in the door handle. You must first remove the cover from the handle used to close the door when getting in the car and the screws are there. The rest of the panel are snap-ins.
If only the one door lock is not working, the actuator has probally gone bad. An electrical problem may exist, but is not what I would go after first. Check for power and ground signals at the actuator(will have to remove the inner door panel) if you have power and ground, replace the actuator
you need to spend some time triing the best you can to get the top of the door panel open a bit to see what is broken inside, most likely a clip.The other thing to try is a slim jim to get the door open then repair the door lock.