Question about 1996 Land Rover Discovery
I'm converting my 96 disco 300tdi rear prop to a 200tdi prop and flange conversion kit because of continued rubber coupling problems due to the lift that's on my 300tdi.
Would love some advice on the flange conversion kit proceedure please. Prop change no problem, just unsure how to install flange conversion. Thanks.
SOURCE: land rover flange conversion
I have done this for a customer. Firstly you need to remove the old flange, presumably you have the flexi coupling drive. You will need a slide hammer to pull out the centre pilot shaft of the flange, then remove the flange nut and flange.
Then you need to space out the new flange using a large washer between the bearing and flange. Use a depth guage so you now how much clearnce you require.Then refit the flange and nut, refit the prop.
You dont need to change the diff, thats more expense and time lost
Hope this helps
Posted on Feb 17, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 11, 2016 | Cars & Trucks
Apr 06, 2014 | Land Rover Discovery Cars & Trucks
May 31, 2012 | 2003 Land Rover Discovery
Mar 01, 2011 | 1997 Land Rover Discovery
Apr 25, 2010 | 2004 Land Rover Discovery
Nov 05, 2009 | 1994 Land Rover Discovery
Jun 07, 2009 | 1998 Land Rover Discovery
471 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: