Question about 1994 Ford Probe

1 Answer

CV Joint Axle Replacement

I just need instructions on how to replace my driver side cv joint axle.

Posted by on

  • Anonymous Mar 22, 2014

    i bought a used reraend with a bent axle on one side...can't you just pull the axles on my 2000 and use the gear bow out of the one I BOUGHT

  • Anonymous Mar 23, 2014

    Removing inner cv axle from transmission driver side

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 104 Answers

It's not an easy job, and a very messy one! If you have never done CV's before, I suggest you take it to a CV specialist, as they will do it quickly and cheaply in comparison to the hardship you will have to go through doing it yourself. These vehicles are common for the axles rusting into the hubs and siezing in there, and often the whole hub needs to be removed and the axle heated and pressed out. The new CV's often don't come with a tone wheel for the ABS system and you may need to swap the old tone wheel onto the new CV joint, and measure the alignment of it with the sensor when refitting.

Posted on Oct 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CV boot leaking


get a boot replacement kit remove axle from suspension and trans. clean old grease out of failed axle, stuff new grease into cv joint and put new boot on shaft close to joint. fill the boot with the rest of the tube of cv grease and install per instructions.

Nov 03, 2012 | 2003 Subaru Baja

1 Answer

How do i change a c/v joint 95 dodge spirit


its better to change the whole axle it has both cv joints and both boots and its faster to do . the cv joint cant be changed with the axle in the car you have to remove the axle so you just install the replacement axle and your done just pick up a chilton manual at any auto part store for your car it gives you step by step instructions . price the cv joint and the whole axle and see the difference hope this helps

Oct 08, 2010 | 1995 Dodge Spirit

2 Answers

Cv joint but the plastic thang that go around it


One would have to remove the half shaft to service the cv joint properly.

CV-Joints Overhaul Check the CV-boot for wear tccs7030.jpg

Removing the outer band from the CV-boot tccs7031.jpg

Removing the inner band from the CV-boot tccs7032.jpg

Removing the CV-boot from the joint housing tccs7033.jpg

Clean the CV-joint housing prior to removing boot tccs7034.jpg

Removing the CV-joint housing assembly tccs7035.jpg

Removing the CV-joint tccs7036.jpg

Inspecting the CV-joint housing tccs7037.jpg

Removing the CV-joint outer snapring tccs7038.jpg

Checking the CV-joint snapring for wear tccs7039.jpg

CV-joint snapring (typical) tccs7040.jpg

Removing the CV-joint assembly tccs7041.jpg

Removing the CV-joint inner snapring tccs7042.jpg

Installing the CV-joint assembly (typical) tccs7043.jpg

prev.gif next.gif

Oct 08, 2010 | 2004 Oldsmobile Alero

1 Answer

How to replace a CV joint 2000 Cavalier Drivers side


Buy the right CV axle. Raise right front of vehicle. Remove wheel. use a lugnut and washers to secure brake rotor so that it is not flopping and trapping rust behind. Remove axle nut. Loosen nuts from outer tie rod end stud and lower ball joint stud almost all the way off, but do not remove them completely. Seperate the studs from knuckles by striking each knuckle with a ball peen hammer. After the tie rod and lower ball joint are seperated from the spindle knuckles, pry down on lower control arm and push end of axle through hub toward transaxle until hub and spindle assembly is free from axle/CV joint. Place drain pan under transmission. Carefully place pry bar between innner CV joint and transmission and pop axle assembly loose. Install new axle in reverse of the dissassembly.

Feb 21, 2010 | 2000 Chevrolet Cavalier

1 Answer

Hyundai 2005 Elantra cv boot replacement instructions.


There are no instructions available except with the purchase of SOME boot kits. Depending on the CV joint design, you may not be able to remove the joint from the axle. However, most Hyundai CV joints can be removed from the axle by using a drift and a 2 pound hammer to knock the joint off the axle. Once you've done this, it's a simple matter of removing the old boot and installing the new one w/fresh grease and tension bands. Otherwise, you have to remove the DOJ from the other end of the axle and replace the boot that way.

Aug 24, 2009 | 2005 Hyundai Elantra

2 Answers

94 Geo Prizm CV or driveaxle?


on this type of vehichle, you have two axles in the front; one going to each side. Chances are that the boot at the axle joint was torn and that is why you are having problem. In teh past people used to replace the boot, this day and age its actually cheaper to replace the axle. So you would need to replace that side of the axle (the half shaft).

Nov 19, 2008 | 1994 Geo Prizm

Not finding what you are looking for?
1994 Ford Probe Logo

420 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...