Question about 1991 Chevrolet S-10

1 Answer

Surpentine belt I replaced the water pump on my 1991 Chevy S-10 2.8 liter motor. In order to do this I had to remove other parts such as the A/C pump, power steering pump - Being careful to remeber where all the bolts go when I put it back together, well, I forget to take note of the surpentine belt & how it routes thru the pullys & also how to get it back on without damaging the belt.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Well first check your owners Owners manel. Also there is usual directions on were the belt goes under the hood so check there.

Posted on Oct 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ?


Where is the crank position sensor on a 95 Toyota celica gt 2.2

search.aibing.cc/Where+is+the+crank+position+sensor+on+a+95+Toyota...
P1335, No Crankshaft Position Sensor Signal - Engine Running. ... 91 1991 ToyotaCelica GTS Engine Mount Right 2.2L 4 Cyl Genuine. ... 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 . ... Powered by a 2.2-liter engine, the Celica now had ST and GT trim models. ... in 1986 and a 2.0-liter ...

Where is crank position sensor on a 1994 toyota 2.2liter 4cyl ...

www.fixya.com/cars/t26080657-crank_position_sensor_1994_toyota
31 mins ago - It is not behind pully nor in dist all videos show - Toyota Cars & Trucks question. ... Change a crankshaft position sensor on a 2000 eclipse.

toyota camry crankshaft sensor - ABMforum.com

abmforum.com/toyota-camry-crankshaft-sensor.html
toyota camry crankshaft sensor 99 camry crankshaftcamshaft position codes i got a problem with my 97 ... The car 96 toyota camry 2.2 liter 4 cyl. ... 1994 toyota camry 2.2L 257k miles Symptoms Car overheats Top radiator hose hot bottom cold ...

Toyota Camry 5SFE Engine Timing Belt, Water Pump and ...

hubpages.com > Autos > Do It Yourself Auto Repair
Jul 10, 2014 - The Toyota 5SFE motor is a four-cylinder, 2.2 liter, timing-belt-driven, double ..... Remove the lower timing belt cover with the crankshaft position sensor. ..... I've never, ever replaced the harmonic balancer on a 4cyl 5SFE.

1995 Toyota Camry LE 4 cylinder - YouTube

? 2:27
https://www.youtube.com/watch?v=7TW6hlUiHWQ
Sep 6, 2011 - Uploaded by jacasan2000

Feb 03, 2016 | Toyota Cars & Trucks

1 Answer

Is there a relay switch on a 1991 Chevy S 10 2.8 liter if you run out of gas


No. But if you hit the bottom of the tank and it starts working again, replace the pump. Old pumps don't like running out of gas.

Feb 09, 2015 | 1991 Chevrolet S-10

1 Answer

Replace water pump


Well the bad news is if you have the 3.5 liter engine, the entire engine assembly needs to be removed in order to change the water pump. If you happen to have the 3.3 liter engine you will need to remove the timing belt in order to get at it. Need to know what your engine size is before I can help any further

Oct 11, 2013 | 2008 Toyota Highlander

1 Answer

How do I replace the timing belt and water pump on my 1991 sun bird. 2.0 liter engine


Water Pump: Remove timing belt rear protective covers, Remove lower radiator hose from water pump. Remove water pump attaching bolts then the water pump and sealing ring, Clean engine block and water pump sealing surfaces, then apply a 3/32 inch of RTV sealant to sealing surfaces. While RTV sealant is still wet, install water pump. Tighten attaching bolts finger tight. Install lower radiator hose on water pump, then belt rear protective covers. Install timing belt

Jan 18, 2013 | Cars & Trucks

1 Answer

How do I get the belt off to replace water pump on 1991 chevy silverado 5.0 motor?


One most chevys in the 90's.The belt tensioners have a sqaure slot undr the idler pulley on the tensioner that a 3/8 socket extention fits neatly into . Put it on a socket wrench put the extion in to the slot and push the preload spring bascily the tensioner toward the center of the engine and the belt fall off . Make sure you know to rooting of the belt you may want to take a picture if there is no decal. Then install in reverse order with the belt going over the tensioner pulley last

Feb 21, 2012 | 1991 Chevrolet K1500

1 Answer

Need to change surpentine belt on 1991 geo tracker. I have the belt but unsure how to go about changing


Loosen steering pump
loosen alternator bracket
change belt
belt tension should be 22 LB

Jun 26, 2010 | 1991 Geo Tracker

2 Answers

Need to replace water pump on a1997 chevy lumina 3.1L V6 need insructions


3.1L And 3.4L (VIN E) Engines
  1. Disconnect the negative battery cable.
  2. Partially drain the cooling system into a suitable container.
  3. Remove the drive belt guard.
  4. Loosen the water pump pulley bolts before removing the drive belt. This should help keep the pulley from turning as the bolts are loosened.
  5. Remove the drive belt. Please see Section 1.
  6. Remove the water pump pulley bolts and remove the pulley.
  7. Remove the water pump bolts and separate the pump from the engine front cover.
To install:

b604dca.gif
Exploded view of the water pump and front cover arrangement—3.1L and 3.4L (VIN E) engines


  1. Clean all parts well. Use care when scraping gasket material from the front cover and the pump. Do not gouge aluminum parts. Clean the bolt threads well. The torque specification is low and if the bolt threads are dirty, an accurate torque is not possible and leaks are likely to develop.
  2. Using a new gasket, install the water pump to the front cover. Install the cleaned and lightly lubricated water pump bolts. Torque to 89 inch lbs. (10 Nm).
  3. Install the water pump pulley and bolts and torque to 18 ft. lbs. (25 Nm).
  4. Install the remaining components in the reverse order of the removal process. When refilling the cooling system, use the proper mix of DEX-COOL® and water. Check for leaks.

Oct 13, 2009 | 1997 Chevrolet Lumina

2 Answers

How do you change the timing belt in a 1991 chevy cavalier 2.2litre


pull front of motor off till you get to the water pump belt is right behind cover not a easy job good luck

Oct 10, 2009 | 1991 Chevrolet Cavalier

1 Answer

We need the diagram to replace the Serpetine belt on a 1991 Chevy S-10 Blazer, Automatic, 4.3 Liter engine 4 X 4


go to www.autozone.com and register for free. You will then have a full free online repair manual

Sep 09, 2009 | 1991 Chevrolet S-10

1 Answer

Leak from the water pump


  • first of all you are probably going to need a torque wrench for the crank shaft pulley bolt it has 225lbs.of torque or more.I just did one on my 1991 honda accord dx .you have to take off a/c belt ,alternator etc. on the crank pulley.(I took it to a shop and they heated the 3/4 in. bolt and used torque wrench. I broke a half inch breaker bar trying to get it offf) next use puller to take off crankshaft pulley.support motor and remove motor mount bracket. take off upper and lower timing belt covers.take off timing belt and other belt using the tensioners.take off and replace water pump CHECK ALL TIMING MARKS with #1 piston@TDC. There are about 6.

Jun 02, 2009 | 1991 Honda Accord

Not finding what you are looking for?
1991 Chevrolet S-10 Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...