Question about 2007 Mitsubishi Eclipse Spyder GT Convertible

Open Question

Seat Belt "beeper"

Is there a way to permanently disable the seat belt "not fastened" alert?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 338 Answers

SOURCE: Seat belt indicator won't stop buzzing

have you tried unplugging the 2 prong plug under the seat(its right under the seat belt buckle)? i have a 98 mitsubishi eclipse and i simply unplugged it and it disabled the buzzer. if that doesn't work, you can connect the 2 wires (on the harness side) either by bridging the 2 terminals with a jumper wire or you can cut the plug off and just twist the 2 wires together.

Posted on Oct 15, 2008

  • 333 Answers

SOURCE: fix a stuck back seat seat belt 2006 mitsubishi

Most often the cause for the rear belts getting stuck is not an actual bad belt mechanism, but the belt simply getting folded over and retracted that way.

Try pulling the belt out as far as you can and inspect for the belt being folded. If this is the case, slowly work it back and forth trying to unfold it. It will take a while sometimes.

Posted on Sep 10, 2009

  • 74 Answers

SOURCE: when parked on forward slope rain water collects

your top is leaking,check the weather strip seals to see if any are torn or missing-be careful because mitsubishi does not carry all parts for spyder tops anymore-good luck

Posted on Dec 18, 2009

  • 22306 Answers


wiggle the wires under the seat

Posted on Jan 12, 2010

  • 78 Answers

SOURCE: 05 Mits Endeavor, passenger side weight sensor

take a look at

They're working in Airbag-Simulators, Occupancy Sensor-Simulators and Seat Belt-Sensors.



Posted on Aug 17, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


check and test seat belt circuit some times debris can damage wiring under and at side of seat --seat belt clip lock can go faulty

Oct 31, 2016 | Seat Cars & Trucks

1 Answer

I have an audi a3 tdi sport 2003 the seat belt won't pull over enough for it to buckle in to get it fastened any idea on how to fix it

I think the seat belt have a twist and it went into the seat belt housing. Pull the seat belt all the way out hard and un do the twist and let it go back into the seat belt housing. This should fix this problem

Mar 27, 2015 | Audi A3 Cars & Trucks

1 Answer

How to disable seat belt warning beeps?

First... You should have your passengers wear the seat belts but if you insist you can find the wire going to the seat belt buckle and unplug it under the seat.

Jan 14, 2014 | 2006 Toyota Prius

1 Answer

The sensors which fit below the passenger seat are missing. I want to know the name of these sensors.

seat belt sensor or air bag sensor, some cars measure weight in the seat on the passenger side and if it is below a certain amount it disables the passenger air bag, a safety for little kids, other sensor for seat belts, if there is any weight and no seat belt is fastened it will turn the seat belt warning light on in the dash.

Oct 12, 2012 | Toyota Previa Cars & Trucks

4 Answers

My seat belt alarm keeps dinging even though my seat belt is secured/fastened. how do I make it stop?

Check under both seats and make sure the wire harness is plugged in all the way. Some times shoving stuff under the seat unplugs wiring harness; seat belt sensor, occupant weight senor for air bags, heated seats & power seats (could be more than one wiring harness. Look inside belt buckle fastener; is it crusty with anything (food, crumbs, coin change)? Blow it out with a portable can of air. Make sure both the male/female parts of belt are clean, non-rusted/corroded & non-damaged to make good electrical connection when belted in; this turns off your belt warning light and bell. Check all wiring from the belt buckle release a the way down to under the seat; both sides...both seats They both seats could be interlinked into system; when one fails (bad connection) the other seat sensor fails also.

Jan 11, 2012 | 2000 Ford Mustang

1 Answer

Seat belt lights come on when driving down the road

sensor on the seat belt fastener bad. Wiggle it to make it go off with the seat belt locked in place or change the sensor.

Dec 26, 2011 | 2006 Chrysler PT Cruiser

Not finding what you are looking for?
2007 Mitsubishi Eclipse Spyder GT Convertible Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

77947 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8832 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides