Question about 1995 Honda Accord

1 Answer

Headlight assembly just had my '95 honda accord painted. i need to know how do i remove and replace both headlight assembly.

Posted by on

  • Anonymous Mar 30, 2009

    How do you get the front bumper off? I have the same year and everything, the first day I went out I think I went to far, took the grill out, went under the car and unbolted what I think was the lip (now) but I do know about the screws in the wheel well, those are extremely annoying. any other bolts/screws/tips I should know about? (didn't finish project, had to wrap it up because it was too cold outside)

  • yadayada
    yadayada May 11, 2010

    What color?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You will have to remove the front bumper cover to get to 2 bolts and also the grille to get another bolt off also there are are a total of 5 bolts that hold it in. be careful taking it out as you can crack the mounting brackets for the assembly just be patiece it will come out.

Posted on Dec 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

REPLACE HEADLIGHT 2008 SPRINTER


On some cases there are few hidden clips holding the assembly from under hood,that has to be released to remove headlight .

There are few troubleshooting help links showing how to replace car headlights,i suggest you to refer the links to solve these issue.

--------
Click the link below:------
How to Replace a Headlight http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight.html

------------
How to Replace a Headlight Bulb


http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-bulb.html

-----------
How to Replace a Headlight Switch http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-headlight-switch.html

----------
How to Replace a Headlight Assembly

http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-assembly.html


How to Replace a Park Light Assembly http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-park-light-assembly.html

-----------
Low beam headlights Modification? http://schematicsdiagram.blogspot.in/2012/04/low-beam-headlights-modification.html

----------
Headlight Assembly Removal On Honda Accord http://technoanswers.blogspot.in/2012/06/headlight-assembly-removal-on-honda.html --------------- Honda Headlight Assembly Removal
http://schematicsdiagram.blogspot.in/2012/06/honda-headlight-assembly-removal.html-----------
How to Replace a Headlight Door http://schematicsdiagram.blogspot.com/2011/08/how-to-replace-headlight-door.html

---------
All headlights not working? http://repairhelpcenter.blogspot.com/2012/01/all-headlights-not-working.html

----------
How to replace HID headlight bulbs for lexus 400h? http://schematicsdiagram.blogspot.com/2012/01/how-to-replace-hid-headlight-bulbs-for.html

----------
Working of Headlight switch?
------------
Both headlight bulbs blow together?
------------
Car headlight bulbs don't last long?



----------------
These will help.
Thanks.

Nov 23, 2012 | 2010 Mercedes-Benz Sprinter

2 Answers

How do i change my headlight assembly on a 2001 honda accord


HEADLIGHT REPLACEMENT

1. Remove the front bumper
2. Disconnect the connectors (A).
3. Remove the 5 mounting bolts (B), then remove the headlight assembly (C).

Fig. 21: Removing Mounting Bolts & Headlight Assembly
6_26_2012_3_27_45_pm.jpg

Jun 24, 2012 | 2001 Honda Accord

1 Answer

HOW DO YOU REMOVE THE ASSEMBLY ON THE OLDS 95 SO I CAN CHAGNE THE LIGHTS.. I REMOVED TWO SCRES IN THE FRONT BU IT DOES NOT HELP TO REMOVE THE ASSEMBLY


Step 1:
Be sure the ignition key is not in the ignition, and the headlight switch is in the "Off" position.



Step 2:
Locate and remove the two headlight assembly screws on the top rail of the headlight assembly. Use the nut driver to remove them.


Step 3:
Place a rag between the headlight assembly and the bumper to protect the paint.


Step 4:
Wrangle the assembly outward. There is a guide pin behind the assembly on the fender side that holds it in place. This needs to be popped out of its socket in order to remove the headlight assembly. Pull slightly outward from the side, then forward and away from the car.


Step 5:
Locate the correct bulb socket (high-beam/low-beam). Disconnect the wire connector using the flathead screwdriver.


Step 6:
Turn the socket 1/4-turn counterclockwise to remove the socket from the headlight assembly. Remove the old bulb.


Step 7:
Insert the new bulb into the headlight assembly, and turn clockwise to lock into place. Be careful not to touch the glass bulb of the new socket. This could degrade headlight performance.


Step 8:
Reconnect the wire connector to the bulb. Test the light before replacing the headlight assembly, then turn off the lights again.


Step 9:
Reinsert the headlight assembly, making sure to align the guide pin into the socket. Replace the screws and tighten.

Feb 12, 2011 | 1995 Oldsmobile Aurora

2 Answers

Honda accord repair manual


The closest discount auto store should have it, or Haynes.com at this link http://www.haynes.com/products/productID/194

Mar 13, 2010 | 2000 Honda Accord

1 Answer

Can't replace passenger side headlight on 4 cylinder sedan because of obstruction from what appears to be part of the emission control system (a plastic funnel assembly). Can't free the three screws...


  1. Remove the front bumper.
  2. Disconnect the connectors (A).
    1. Remove the five mounting bolts (B), then remove the headlight assembly (C).
    2. Install the headlight in the reverse order of removal.
    3. After replacement, adjust the headlights to local requirements.

Nov 07, 2009 | 1999 Honda Accord

1 Answer

Have a 2000 honda accord sedan. need to know


Pop open the left side and follow the same pattern. ;o)

Sep 15, 2009 | 2000 Honda Accord

2 Answers

Headlight replacement for 1992 Accord


You can i know its a big pain but its possible just make room and dont break anything.

Feb 08, 2009 | 1992 Honda Accord

1 Answer

How to assemble a 2000 honda accord headlamps


Its actually pretty straight forward. Disconnect the headlight. Then their are two bolt on the top the the headlight. Remove those then remove the wheel of the car. Then their are three more bolts bellow the headlight All three facing from the outside of the fender to the center of the car.

Then once you have those 5 bolts out. Pull the headlight forward and up. Their are two tabs that go into the fender.

Dec 06, 2008 | 2000 Honda Accord

1 Answer

1996 accord headlight replacement


hi you have to remove the bumper but not a big job as it is only the cover a screw under each wheel arch three clips in the middle and a set of clips and ten millimeter headed bolts yates210456

Sep 20, 2008 | 1996 Honda Accord

Not finding what you are looking for?
1995 Honda Accord Logo

662 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...