Question about 2001 Mitsubishi Eclipse

1 Answer

Entering the radio code

Changed the battery and the radio is dead. I have the code and not sure how to enter it. I need step by step instruction please.

Posted by on

  • mooseracing3 Dec 16, 2008

    i put in the wrong code now its locked

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The 1-4 buttons on your station preset are used to input the numbers. The one is the first number, the 2 is the second number, etc. Once you have the entered the 4 digit code, you have to push the tape button. If the code is correct, your normal display show.

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Radio not working showing word SECURE


look inside your book owner manual
somewhere it supposed to have the code and a way to enter the code ,
or a manual of the radio !
somewhere in those books the code is printed like a ink pad label !
when you change the battery you need to inter the code each time,
open the radio with the number pad enter the code
you must do step by step like the manual of the radio say !!!!!
or the car dealer could help you
if you dont have the code the radio is useless

Nov 27, 2015 | 2003 Nissan Primera

1 Answer

My radio in my 2004 dts will not turn on after battery went dead


You need to gete the radio security code and enter it in. Just call or drop by the dealer and theye can give you the code or enter it. Should be free but your dealer may vary. When you changed the battery and lost power the radio goes into a secure mode just in case it was stolen. The code should be about 4 digets long so its not a big thing to enter. its keyed to your vin number so the d ealer may want to see that as well as your registtration and maybe a drivers licence depending on how paranoid they are.

Aug 16, 2012 | 2004 Cadillac Deville

2 Answers

Ihello,i own a 1999 volvo S70,my radio says off,i press the wrong code 3x,can you help me please


put a battery charger on the battery,turn key to on postion[engine not running] turn radio to on and let it sit there like that for about 5 hours or untill radio say code then enter right code. if battery goes dead during this you have to dtart over

Aug 27, 2010 | 1999 Volvo S70

1 Answer

Dead battery lost code to radio.how do i redo the


Procedure:

01. Turn the ignition ON (The radio displays LOC)

02. Hold down the Radio Presets 2 and 3 buttons for six seconds

03. The radio display changes from LOC to a three-digit number. Write this number down. Don’t take forever, fifteen seconds max before the next step.

04. Press the AM/FM button

05. The radio display changes to another three-digit number. Write this number to the right of the first one.

06. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05

07. Call 1 800 537 5140

08. Press 1 then # (pound). You’ll hear “Invalid Code, try again”

09. Press 139010 then # (pound). You will be asked to enter your four or six digit code followed by * (start)

10. Enter the number from STEP 6 then * (star)

11. Listen to the four-digit number and write it down. It will be repeated twice

12. Turn the ignition ON (The radio displays LOC)

13. Use the MN and HR buttons to enter the code from STEP 11

14. Press the AM/FM button. The radio display changes to SEC Your radio is now “un-locked” and usable. The Theft-Deterrent feature is STILL active! If you want to disable it, use the instruction on page 3-27 in your Y2K Owner’s manual. Use the code from STEP 11 instead of your personal code.


This tip originated from LOTZAHP

Jul 21, 2010 | 1996 GMC Jimmy

3 Answers

I have a 2000 eclipse had a dead battery and now radio is saying


You need to call Dealer or stop at one to get proper code for your radio.You can check owners manual for reprogramming instructions.If not there I would suggest googling it.

Oct 03, 2009 | 2000 Mitsubishi Eclipse

2 Answers

Theft deterrent


call 1888mitsu2001, choose option #4, then hit * (star). give the operator the last 8 numbers in your vin and they will provide the radio code for FREE!

DO NOT PAY FOR THE CODE ONLINE OR GO TO THE DEALER (they will also charge you).

Jun 18, 2009 | 2001 Mitsubishi Eclipse

1 Answer

How to change an alternator in 1983 honda accord


If your radio is coded, make sure you have the code and know how to re-enter the code in the radio.
  • Remove both battery cables and secure them away from the battery terminals.
  • Detach the E, F and N plug from the the alternator.
  • Slacken the alternator mounting bolts and move the alternator forward towards the engine.
  • Remove the drive belt.
  • Now undo all the mounting bolts and lift the alternator clear of the vehicle.
Re-fitting is just the reversal of the removal.

Nov 23, 2008 | 1983 Honda Accord

1 Answer

Radio locked


I had the same problem with my 1999 Sonoma. try this:
(You must be in your truck with a cell phone handy)

01. Turn the ignition ON (The radio displays LOC)

02. Hold down the Radio Presets 2 and 3 buttons for six seconds

03. The radio display changes from LOC to a three-digit number. Write this number down. Don’t take forever, fifteen seconds max before the next step.

04. Press the AM/FM button

05. The radio display changes to another three-digit number. Write this number to the right of the first one.

06. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05

07. Call 1 800 537 5140

08. Press 1 then # (pound). You’ll hear “Invalid Code, try again”

09. Press 139010 then # (pound). You will be asked to enter your four or six digit code followed by * (start)

10. Enter the number from STEP 6 then * (star)

11. Listen to the four-digit number and write it down. It will be repeated twice

12. Turn the ignition ON (The radio displays LOC)

13. Use the MN and HR buttons to enter the code from STEP 11

14. Press the AM/FM button. The radio display changes to SEC Your radio is now “un-locked” and usable. The Theft-Deterrent feature is STILL active! If you want to disable it, use the instruction in your Owner’s manual. Use the code from STEP 11 instead of your personal code.

Hope it helps.

Sep 10, 2008 | 2000 Chevrolet S-10

2 Answers

I have a 1999 chevy lumina LTZ and i change the battery after that my cd player locked asking me a code so can u please help me how to unlock the code. Thank you


Search the net for "Delco unlock codes" OR "Delco security codes" you should easily find a set of instructions telling you to get a code from your radio and then call an 800 number. Follow these instructions. This will give you the factory unlock code for your stereo. Worked for me and for heaven sakes don't pay anybody for this information - it's free.

Aug 04, 2008 | 1997 Chevrolet Lumina

3 Answers

Lock code for radio cassette


After failing to enter the correct code in 3 successive tries, you must leave the key in the "ignition on" position with the radio on. This will allow you 3 more tries to reset the 5 digit code.
If you enter an erroneous digit, you must complete the 5 digit code, even though it is wrong. You have 2 more attempts to enter the correct code.
Charlie

Jun 25, 2008 | 1994 BMW 3 Series

Not finding what you are looking for?
2001 Mitsubishi Eclipse Logo

717 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...