Question about 1995 Dodge Intrepid

1 Answer

1995 dodge intrepid

I have 1995 dodge intrepid and the gauges dont come on and it starts jerking going dowwn the highway like you put the brakes on

Posted by on

  • joshflicking Jan 27, 2009

    when the gauges work it runs fine but when they dont it runs real ruff

  • noodle4848 Feb 27, 2009

    when i go 70 or 80 my car starts to **** why is that

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The ignition switch is faulty if the gauges and dash lights will not come on, change the fuses first. Transmission fluid and filter change needed. Differential gear oil change also needed.

Posted on Nov 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1997 dodge intrepid 3.3 litre start even after I replaced 20 amp eng cntrl fuse?


Hello William , It could be one of many things. Was it running ok immediately prior to it failing?

Feb 02, 2015 | Dodge Cars & Trucks

1 Answer

My 1995 dodge intrepid won't go past third gear


Put lucas 1 or 2 botle.,remove extra.

Jun 10, 2013 | Cars & Trucks

1 Answer

Need to know how to replace brake booster in 1995 dodge intrepid


The brake booster should located directly behind the brake master cylinder. if it is you need to remove the brake master cylinder, do not remove any brake lines, there will be a vacuum line going into the booster, either from the front or the side, it's easy to spot, it's fairly large compared to other lines on you car. under the dash where the brake pedal is, you will need to remove the brake rod form the pedal tiself, as it will most likel be a solid part of the brake booster itself from the factory, then unbolt the booster from the firewall, 4 mounting bolts usually, all 4 might be in the engine compartment or 2 inside the car, 2 in the engine compartment. Before you start go to Auto Zone and look at a replacement booster, it will help you see what you're going to do when you start on you repair.

Oct 06, 2010 | 1995 Dodge Intrepid

1 Answer

Need a wiring diagram for brake lights on a 1995 dodge intrepid ,the two main lights are inop,the center light is ok


Check for 2 brake light switches on the brake pedal some vehicles run different switches for the 2 lights. look for power in to both and out of both when you press the pedal.

Oct 24, 2009 | 1995 Dodge Intrepid

2 Answers

Short in the wiring.


search for broken or bare wires, check for loose connections

Sep 27, 2009 | 1996 Dodge Intrepid

2 Answers

I have a 1996 dodge intrepid and the car shaking when the speed is between 35 & 55 mph; and this shaking increase if I try to stop the car. Someone told me than maybe was a traffic continous bottom or...


To me that sounds like more of a tire problem than anything, Have there been any traffic emergecys lately maybe locked up brakes or something, i would take it to a tire shop and have them balance and align my tires.

May 07, 2009 | 1995 Dodge Intrepid

1 Answer

1999 Dodge Intrepid engine jerks, cuts off when slows down/stops


Amattison:

Make sure you are using an original key. I made a copy of my key, and the copy will not work. It will start, but then shut off. Appearantly there is a chip or something in the original.

Feb 02, 2009 | 1999 Dodge Intrepid

1 Answer

2004 Dodge Intrepid picks up speed very slowly...sometimes


you need your throttle positioning sensor replaced and set.

Oct 14, 2008 | 2004 Dodge Intrepid

Not finding what you are looking for?
1995 Dodge Intrepid Logo

Related Topics:

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...