Question about 1999 Pontiac Montana

1 Answer

Replace water pump

My water pump has pressed on pully. how do i get the pully off?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 426 Answers

You will need to take it to some one that has a hydraulic press and nessecary adaptors as you have to put it on the same way.Pressed on and pressed off

Posted on Oct 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MY WATER PUMP PULLY RATTLESIN IDEL WHEN IGIVE ITGAS


replace the water pump as the bearing is failing

Mar 31, 2015 | Cars & Trucks

1 Answer

How to replace water pump on a 2001 caravan


3.0 timing belt driven, if a 3.3 or 3.8 serpentine belt driven,darin cooling system,remove serp belt,remove water pump pully & pry motor over to left while feeding the pully past the rt frame rail,unbolt water pump then reverse what you took off.

Oct 04, 2014 | 2001 Dodge Caravan

1 Answer

Well, do i remove the power steering pump or pull the pully to remove the water pump and if the pump, is access from underneath ??


you have to remove your power steering pump to replace your water pump you remove one bolt from the top and one from underneth by going threw holes in power steering pump pully

Sep 17, 2011 | 1995 Oldsmobile 88

1 Answer

Whaere is the water pump located


The water pump is on the top right hand side of the engine if you standing on the passenger side looking at the front of the engine. Keep in mind that the water pump only goes back on one way, so make sure that you have it clocked right or the bolts wont line back up. Remove the water pump pully first before you take the belt off. This makes it easier to break the pully bolts loose and then remove the water pump bolts. Then after, put the pully back on and then the belt and then tighten the pully bolts, the belt will help hod the pully for you.


360dreamworx_44.gif
360dreamworx_45.gif
360dreamworx_46.gif

Aug 08, 2011 | 2003 Buick Rendezvous

1 Answer

Can I replace the pully without replacing the water pump?


Yes if it has 4 - 10 milimeter bolts you can change the belt pulley not the actual water pump pulley it is a pressed in part of the water pump

Jul 07, 2010 | 1998 Buick LeSabre

4 Answers

I have a high pitched noise which appears to be coming from front right engine compartment (as you are looking at the engine) which sounds kind of like a belt that is squealing. It is intermittent. Just...


Could be several things. WHICH ENGINE?.. 4 cylinder (has three belts, power steering/water pump, alternator & A/C compressor, one tensioner pully A/C compressor), The V6 2.7 (has only one belt, 1 Idler pully and 1 tensioner pully), the V6 3.5 has two belts - A/C/alternator, and power steering - there are two tensioner pullys). Noises can be caused by the belt(s) themselves, pullys, bearings, pully bearings, water pump shaft bearings (or belts/pullys rubbing up against something). Let's not forget that there is also belt(s) behind the Timing Belt cover as well as pullys and bearings associated with the timing system. You could start by removing one accy drive belt at a time (alternator, water pump, compressor, power steering, etc) to see whether or not the noise goes away in each case. If after each case, you discover the noise is still there, it's probably behind the timing belt cover (idler/tensioner pully, water pump shaft bearing, crankshaft bearing, etc.). Good Luck

Jun 29, 2009 | 2004 Hyundai Santa Fe

3 Answers

Replacement of timing belt for 2004 Hyundai Elantra


yes it is and u may need vavle and valve guides

Jun 28, 2009 | 2004 Hyundai Elantra

1 Answer

The pully on my water pump is lose


The pulley on the water pump is separate from the pump on both the 6 and V-8 engines (you didn't specify which engine was in your truck).
If the pulley is wobbling around and grinding, the bearings have failed on the pump. The fact that it has not leaked is not unheard of. REPLACE THE PUMP! Continued operation will cause the impeller (the side of the pump which moves the water) to chew up the housing. Not to mention leaving you stranded.

Apr 06, 2009 | 1998 Dodge Durango

2 Answers

The belt that runs the water pump on 1995 Auora


Looks like the belt got hot??? You mean there are shreds of belt material all over the place? If so you have a locked pully somepalce. Replacing the belt is easy, find the diagram of the belt system under your hood. Find the pully that is the tensionor pully. Fine the correct wrench, remove tension, slip of belt from one pulley. remove belt completely, then, since you have shredded belt material, spin each pulley and see which one isn't turning easily. All the pullies will spin easily execpt for the crank. If you have one that's not, well, that one is shot. Needs to be replaced. And if may not just be the pully, might be the accesory which the pulley sits on. Example, water pump, altenator, etc....

Nov 23, 2008 | 1995 Oldsmobile Aurora

1 Answer

Replace water pump for a 1988 pontiac grand am


The pullies have to be pressed off. If you have an AutoZone close by, they can take them off for you.
Do Not hammer the pullies onto the waterpump! Place the pullies face down on your bench or hard surface and tap the pump into the pullies using a punch on the shaft only!

Jun 18, 2008 | 1988 Pontiac Grand Am

Not finding what you are looking for?
1999 Pontiac Montana Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...