Question about 2005 Ford F 350 Super Duty

3 Answers

2005 f350 blows white smoke when on the throttle hard.

When stoped and trying to get moving the truck has started to blow white smoke. not too sure what to check.

Posted by on

  • ltiwelding Oct 25, 2008

    Bosst gauge when hard on throttle will reach about 25 psi filter could be clean did not try that?

  • manzinator Oct 31, 2008

    i drove my truck for awhile didnt notice any overheating and still same problem...

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I recently had this same problem. Ford replaced both the EGR valve (first) which didn't solve it, then the EGR cooler, which did. Both were covered under the 100,000 mile warranty. A strong indicator that this is the real problem would be if you are also losing coolant, but the oil dipstick doesn't reveal water in the oil (brown color).

Posted on Nov 26, 2008

Sounds to me like a head gasket. Keep an eye on your coolant level. Also make sure your degasser bottle (where coolant goes) is clean. If your head gasket is gone, exhaust gas will overpressure the bottle and coolant will be released. It will leave a white/grey film on it.

Posted on Oct 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 123 Answers

Could possibley be a coolant leak, but no guranteed, if too much fuel is being injected for the amount of air entering, diesel fuel can cause a white smoke. I would check the air filter first. Is the boost gauge working, and if so how many PSI of boost are entering the engine?

Posted on Oct 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1996 jimmy running and moving good. stoped at a stop sighn went to take off could not hardly move. then it started smoking relly bad checked tranny fluid it was empty


oooo not good at all. can you get under your car and see if there's a big splatter of red tranny fluid under it? and if there is your seals are gone. hmmm , replacing it is an option. add fluid in after changing the filter and pray your pump has not or does not blow out do not drain any tranny fluid still in it or you most def will blow the transmission pump if you do. GOOD LUCK trannys are a expensive thing to replace and junkyards are not the place to find one

Jan 29, 2014 | Cars & Trucks

1 Answer

Blows white smokes


You have blown an engine head gasket. Seek the help of a local shop to confirm this is the problem as it is a very expensive repair.

Jul 20, 2012 | Cars & Trucks

1 Answer

1998 mustang. overheated now blowing pretty heavy white smoke.


Take it to the pros they will be able to test and evaluate how bad it is .When you start blowing white smoke its a sure sign its hurt .

Feb 05, 2012 | 1998 Ford Mustang

1 Answer

My daughter's 2003 Oldsmobile Alero was blowing white smoke from exhaust. She said that it was a bit sluggish when accelerating. I started it when I got home this evening and it blew white exhaust so I hit...


white smoke is normaly an indication of water entering the combustion chamber of your engine due to a broken head gasket. I am surprised that it stoped but I think that the probelm will come back.

Oct 12, 2010 | Oldsmobile Alero Cars & Trucks

1 Answer

I have a 2000 Chrysler Concorde and when i talk off from being stoped for a little bit it blows out it big cloud of white smoke then its gone right away... what could it be??


White smoke is possibly coolant from a bad head gasket or possibly intake gasket,depending on engine design.

When you say big cloud,I assume the vehicle is warmed up all the way and this happens a lot.

You should check to see if you have coolant in the recovery bottle under the hood,if not or it blows bubbles into it,I wouldn't use the vehicle, even to go around the corner.

It most likely needs to be torn down and repaired, after some initial tests are done.

Aug 06, 2010 | 2000 Chrysler Concorde

1 Answer

It appeared that the radiator at the top was loose. I put some brackets into the extra space so the radiator wouldn't move. This morning when I started it, it began to blow white smoke. I removed the...


dont think the bracket had anything to do with that,try and start with out bracket in am again,the white smoke maybe coolant entering the combustion chamber as it sits, this may be caused by a leaking intake gasket or a bad head gasket, also oil leaking down the valve guide or getting past the rings would cause this but the white smoke would have a tint of blue,good luck,

May 10, 2010 | 1990 Honda Accord

3 Answers

Blowing white smoke


yes and could be caused by a stoped up heater core or runing it hot

Nov 27, 2009 | 2002 Jeep Grand Cherokee

2 Answers

My truck blows white smoke


Hello!
There are two differnt reasons for black and white smoke coming from the tail pipe.
Black smoke means fuel runs rich (car getting to much gas). Check fuel pressure/air filter.
In some cases the white smoke means car is burning oil or transmittion fluid. Have tem checked/replaced.
If you can feel a smelly smoke it can be catalytic converter.
In a worsest scenario if car blowing white smoke it can be engine coolant is getting into an engine cylinder from a bad head gasket ,or a warped/cracked head. So you need to keep your eye on coolant level and check your engine for overheat. Also might be good to check your oil for traces of coolant (on a dipstick it would be a milky substance mixture of oil and coolant).
Good Luck

Dec 06, 2008 | 2006 Ford F-250 Super Duty

Not finding what you are looking for?
Cars & Trucks Logo

364 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...