Question about 2000 Oldsmobile Intrigue
I opened the car the other day without useing remote. It would not turn over, so I thought the battery was dead. Jumpe the car the next day and it was fine. A week later I was at gas station and opened it with out remote, and car would not start, tryed to jump it and it would not turn over. I saw a security warning light on dash. waited about 5 min go it shut the door and it started. Yesterday opened door with remote got in and would not start with security warning light. Waited trying locking and unlocked with remote. Started in 5 mins. help
The heat doesn't work in the car after replacing fan, relay switch, any suggestions
Posted on Jan 22, 2009
The key security uses a series of specific resistors values one appears in the run position and the other in the start position of the key. These resistor values are not of standard values. Some times when a tech installs a remote start they measure the resistor values from the original ignition key and try to pair a set of resistors to match. If they are close the system will work most of the time. However, hot and cold temps may make them drift so the MCU will not accept them. Also these external resistors run through relays of the remote car starter, if the contacts get dirty this will also change the resistor values. Best place to look for answers is with a remote car starter book about defeating the key security for remote start.
Posted on Nov 04, 2008
Tips for a great answer:
Sep 26, 2013 | 2000 Oldsmobile Intrigue
Sep 20, 2011 | 1999 Oldsmobile Cutlass
Sep 02, 2011 | 2000 Oldsmobile Intrigue
Apr 26, 2010 | 1998 Oldsmobile Intrigue
Aug 20, 2009 | 1990 Chevrolet Lumina
Aug 15, 2009 | 1999 Oldsmobile Intrigue
Sep 13, 2008 | 2000 Dodge Dakota Quad Cab
215 people viewed this question
Usually answered in minutes!