Question about 2005 Toyota Tacoma

Open Question

2005 Toyota Tacoma replace front bumper

My son bumped a pole in a parking lot and damaged the front bumper & grill. I want to order the replacement parts & do the bumper & support bracket replacement myself. Is there a web site I can go to that shows me how to do this task and detail the part numbers for my type vehicle?

Posted by on

5 Suggested Answers

adhamsaid88
  • 58 Answers

SOURCE: 1998 Dodge Dakota engine compartment/chassis assembly dwgs.

hello , you could take a look at our products section , our look at the related links , thank you for using fixya.

Posted on Jun 26, 2008

  • 131 Answers

SOURCE: grill compatability

If it is the same year

Posted on Jul 08, 2008

  • 1 Answer

SOURCE: front grill on toyota solara

That is correct - it worked for me - now the questions is - How do I remove the old logo ?

Posted on Apr 25, 2009

  • 34 Answers

SOURCE: Toyota Sienna bumper dent

These vans have a styrofoam bumper wrapped in semi-rigid plastic. When you dented the bumper you probably dented the styrofoam as well, so depending on how deep the dent is you may not be able to bring it back to normal.

The surest way to fix the dent would be to remove the bumper by unbolting it, then taking out the styrofoam and pushing out the dent.

Posted on Aug 11, 2009

  • 1 Answer

SOURCE: 2003 parking bulb toyota tacoma

OK, I just fixed mine. The unit pulls out. You have to get a screwdiriver, wrap it with a cloth so it doesn't scratch the paint, then gently wedge the entire unit out. When it pops out, you'll see the clips that keep it in place. You might think its breaking when you pull it out, but trust me this is how you do. Just be gentle with it. After you get the unit out, simply take the socket out and replace the bulb. I did it in five minutes.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front bumper 2005 toyota scion


look up lkQ te have lot of used car parts

Sep 30, 2012 | 2005 Scion tC

1 Answer

How to remove front bumper and grill from a 2005 Toyota Sienna


I have written up all the steps on how to remove the bumper of a 2004-2007 Toyota Sienna on my step-by-step tutorial on how to replace the radiator: John Fixes Stuff How to Replace the Radiator on 2004 2007 Toyota Sienna

Dec 19, 2011 | 2006 Toyota Sienna

1 Answer

How do you change the front parking light bulb on a 2008 toyota tacoma


if you can not access or see the bulb under the hood in the corner at the fender or inside of fender you will have to remove the headlight assembly and all car makers are making changing bulbs a pain. if you do have to remove the headlight assembly then the steps per repair manual are to remove the grille,bumper cover,bumper filler.believe me there are a lot of customers that wonder why us technicians have to charge so much just to put a bulb in but we did not design the car and it is crazy what you see now days.........good luck and i hope this will help and if i can give any more details let me know......the bulb will twist to remove when you get to it.........let me know how you come out with the project.......

Jun 19, 2011 | 2008 Toyota Tacoma

1 Answer

How do I replace the parking lights on the front of a 2002 Toyota Tacoma?


1. Open the hood.
2. Remove the one screw holding the side marker housing inside the engine compartment about half inch from fender edge.
3. Pull the side marker and unplug electrical connector.
4. Remove bulb holder counterclockwise.
5. Pull bulb straight out.
6. Reinstall in reverse order.

Mar 21, 2010 | 2002 Toyota Tacoma

2 Answers

Heater fan only works on High for my 2005 Toyota Tacoma. On my son Dodge I just needed to replace a resister, is that what is needed here also?


That resistor usually doesn't go as quickly in just five years, although, it is possible. I would salso have the blower switch and wiring to it checked. Thanks, Dana

Jan 06, 2010 | 2005 Toyota Tacoma

1 Answer

Does anyone know how to replace a front 2002?


start removing the grill and bolts holding the bumper in the side of the grille or holding the grille then loosen the fender liner were it meets the bumper and at the top edge of the bumper were it meets the fender they have a 10mm. bolt holding the bumper and voila bumper is off really easy....

Dec 17, 2009 | 2004 Toyota ECHO

1 Answer

On a 1995 tacoma 4wh drive there is a brce that


Hello. I believe what your are referring to is called the Lower Tie Bar.

The Toyota replacement part number is 57104-35020; it is about $132.00 if you want to buy a new one. I hope this helps you out.

Nov 10, 2009 | 1995 Toyota Tacoma

1 Answer

Unfindable object sliding back and forth in rear of vehicle.


Look INSIDE the bumper/apron. You will find that you really did more damage than you thought.

Mar 19, 2009 | 2002 Mercury Villager

2 Answers

How to change the whole headlight assembly on a 05 Honda CRV


You have to remove the front bumper and grill etc

There are 5 bolts holding the headlight assembly in place. 2 at the top and 3 underneath.

Remove the plastic cross piece by prising out the clips and then the grille clips too then unbolt the bolts eithr side under the wheel arch. The bumper is still fastened using cips. Pull the bumper forward to unclip.

Dec 23, 2008 | 2005 Honda CR-V

Not finding what you are looking for?
2005 Toyota Tacoma Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...