Question about 1998 Ford Expedition

1 Answer

Removing door panel and repairing regulator on 98 ford expedition

Passenger window stuck in down position. I need instruction for disassembling the door panel and repairing the regulator.

Posted by on

  • Chris Colenutt Nov 15, 2008

    the drivers side window will go down but struggles to close. I am afraid to lower the window in case it won't close again, and it it turning to winter. Can I just lubricate the slides or is it a bigger problem?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 26 Answers

The panel is held on with plastic fasteners, just pop all them off by putting a screw driver between the pannel and the door and pop em, these plastic fasteners break real easy so i would go buy a few replacements before you get ready to re-install

Posted on Oct 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove passenger door panel on1998 ford expedition


Not off any track

You have a broken window regulator to replace

Try You Tube Video to see if they have door
panel removal

Dec 14, 2012 | 1998 Ford Expedition

1 Answer

Window cable broke so window does not go up and down


The window regulator cable on a Ford Expedition is part of the regulator assembly and is not serviceable separately. Therefore, if your Expedition's window regulator cable incurs damage, you'll need to replace the entire regulator. The cable moves the regulator up or down in response to the window motor. If the cable malfunctions, you won't have command of your Expedition's power window until you replace the regulator. If you have basic auto-repair skills and an hour of free time, you can replace your Expedition's window regulator. Pry the window switch bezel out of the Expedition's door panel using your trim tool. Disconnect the switch from the door harness by hand and set the switch/bezel assembly aside.

  • 2 Remove the hex head screws from the door panel using the Phillips screwdriver. Depending on the year of your Expedition, you may need to remove a trim cover from behind the inner door handle with the trim tool to expose that screw.
  • 3 Lift the door panel up and off the door by hand. If your Expedition has a courtesy light in the lower-trailing edge of the panel, disconnect that light from the door wiring harness before moving the panel away from the door.
  • 4 Push the Expedition's window to the top of the window frame by hand. Tape the glass to the top of the door with packing tape to prevent it from dropping back down.
  • 5 Remove the window regulator mounting bolts with the socket set. Unbolt the regulator from the window glass with the socket set. Pull the old regulator out of the Expedition's door by hand.
  • 6 Set the new window regulator into the Expedition's door by hand. Bolt it in place with the socket set.
  • 7 Reinstall the Expedition's door panel in reverse of how you removed it.
  • Oct 17, 2011 | 1997 Dodge Caravan

    4 Answers

    Passenger side window stuck in down position


    Volcompunker is on track.... if it is a stuck motor problem, before taking door apart, try this...it may work, works well on dodge caravans...

    NO COST and fast PROCEDURE TO FIX IT:

    1. Sit in vehicle, on seat next to problematic window
    2. Ignition key is on
    3. Door in question is opened (in case you closed it)
    4. While door is open, press and hold power window button in desired window travel, keep button pressed !!
    5. SLAM hard the door closed with one hand while other hand holds button as per #4.
    6. Watch window operate as it should.

    7. Repeat 3-6 if necessary, but usually the first try works!

    Jul 11, 2010 | 2001 Ford Expedition

    2 Answers

    My 98 Ford expedition Eb 5.4L front passenger window wont roll down by using the front passenger control switch eventhough the driver side window control switch is in the unlock position. The fuses are not...


    what happened in my 2002 Exp, because they slam the door, the wire broke off switch that power downs the window, but if not that the switch mite be screwed, or you mite have a broken in the door where it opens an closes....

    Mar 31, 2010 | 1998 Ford Expedition

    1 Answer

    2003 Expedition passenger power window...cable is frayed, window stuck 3inches down..can I replace the cable and drum which attaches to motor or do I have to buy the whole regulator..$175.00 I don't...


    sorry. u need to buy the whole regulator. if u already have the door pannel off it is easy. just find something to wedge inbetween the wglass and the weatherstripping

    Nov 10, 2009 | 2003 Ford Expedition

    1 Answer

    Window fell down in door


    window regulaotr cable broke. Need ane regulator. go to tascafordparts.com for discount price. Do not use a used one.

    Front Door Window Regulator Motor Removal and Installation
    1. Raise the front door window glass to the full up position.
    1. Remove the front door trim panel. For additional information, refer to Section 501-05 .
    1. Remove the door speaker.
    1. Position the watershield aside.
    1. sxj~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Make sure the electrical connector is positioned aside before drilling.
      To access the power window motor bolts, use a 19 mm (3/4-in) hole saw with a 8 mm (1/4-in) pilot to drill three holes at the existing drill dimples on the door.
    cc3b152.gif
    1. Disconnect the front door window regulator electrical connector.
    1. Remove the bolts and the front door window regulator motor.

    Jul 02, 2009 | 1999 Ford Expedition

    1 Answer

    Rear passenger side window stuck in down position


    1) Yes you are right to think that it is the regulator.
    2) You can repair this.

    Remove the screws that hold the door panel on.
    Remove the door panel. There are alot of clips on the door panel that just need to be pulled out with panel while removing.
    Remove debris shield.(plastic piece between door panel and door.
    The regulator will be visible at this point.
    Disconnect the electrical connector from the regulator. Separate Glass from regulator. Some use clips some use bolts to hold the glass to the regulator.
    Remove regulator attaching bolts.

    Thats it just reverse the procedure for installation.

    Aug 29, 2008 | 2006 Jeep Liberty

    1 Answer

    Front passenger window does not work


    sounds like bad regulator, pull your door panel apart and it is the part that goes onto the motor. long bow shaped thing with cable attached. pop out rivets, (I think 3 rivets) and on the upper side there are 2 nuts that have to be removed. then wiggle it around till you can get it out of the biggest hole in door. Good Luck.

    Jul 21, 2008 | 1995 Ford Crown Victoria

    1 Answer

    1999 ford expedition with a passenger, front window stuck in the down possition


    Hi,

    Initially, try to determine which fuse goes to the power window. Check and replace if necessary.

    In brief for a temporary remedy just to have the window closed: remove the triangular cover at the top front of the door behind the mirror, there should be a screw there; remove the trim around the door handle another screw, remove the cover of the courtesy light at the bottom of the door, there is another screw behind that; soon as all the screws are out, lift/push up on the door panel and pull off. This would grant you access to the mechanism controlling the window. You can try closing by manually turning the motor.

    Thereafter, pls determine if it is the motor or the switch(es) has failed. Replacements are available here.

    Incidentally, here is a nice tutorial on repairs of power windows in general.

    Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

    Good luck and kind regards.

    Thank you for using FixYa.

    May 31, 2008 | 1999 Ford Expedition

    Not finding what you are looking for?
    1998 Ford Expedition Logo

    306 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    70346 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Ron Lankford

    Level 3 Expert

    5386 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...