Question about 1992 Acura Integra Hatchback

1 Answer

1991 Acura Integra will not drive in reverse

I can drive my car forwardo, but when I attempt to go in reverse, it makes a really loud noise but will not go backwards. Is this a transmission problem?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 42 Answers

I have the same problem in my 1991 Integra LS Sedan Automatic, when i put it in reverse it makes a grinding noise and won't engage...i've been told the "reverse fork" or something is probably bent which can be common from rocking a car from "D" to "R" to get unstuck from mud or snow and to fix this the tranny needs to be taken apart and fixed, or if any cheaper then replace the transmission. Could also do an auto to manual trans conversion, but those are the only options. Fixing the specific reverse problem would be cheaper than rebuilding the whole trans which a lot of ppl say is the solution

Posted on Nov 03, 2008

  • aprilg57 May 14, 2011

    My daughters 1999 Acura developed this "grinding when reverse is selected" problem last night. We dropped it at a shop that specializes in Honda and Acure. He says he has no idea what would cause this problem. Has anybody had any experience and know the fix for this problem?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1991 Acura integra, screw that holds the rotor cap repeatedly backs out, even with lock-tite


replace the distributor. Hate to say it, but there's really nothing else you can do. Lock-tight don't work? yeah, you're screwed. (pun intended).

Jan 24, 2013 | 1991 Acura Integra Hatchback

1 Answer

How do you change the alternator on a 1991 acura integra


From my own experience, you have to remove the driver's side drive axle just to have enough clearance to remove the alternator. Then after you do that, remove the lower bracket for the alternator. THEN you can unbolt the upper bolt and take the offending beast out. Installation is the reverse of above. Have fun, could take anywhere from 4 hours to a whole day.

Oct 06, 2012 | 1991 Acura Integra Hatchback

1 Answer

My 1991 acura integra wont make any noises at all and nothing works when turning the ignition


do you have ignition lights coming on could be broken earth strap or starter motor, flat battery

Feb 11, 2011 | 1991 Acura Integra Hatchback

1 Answer

My 1991 acura integra will not make any noises when turning the ignition and no lights turn on and the doors and windows and seatbelts are power and none of them work. checked the battery but its good and...


You need to check all of your fuses both in the car and underneath the engine.

Make sure the ignition fuse is not broken and that none are missing.

The fuse box is underneath the steering column against the wall. The fuse bracket will show you which fuse does what.

Inside the car it is mounted onto the frame above where the wheel is.

Pop open the box and check them all.

Feb 11, 2011 | 1991 Acura Integra Hatchback

1 Answer

Install radio manual acura integra 91


http://www.modifiedlife.com/1991-acura-integra-car-stereo-radio-wiring-diagram/

May 16, 2010 | 1991 Acura Integra Hatchback

1 Answer

Loud engine noise


What kinds of noise?  Whine or roar?  Try to explain it the best you can.  Where is the noise coming from, front/back?

May 26, 2009 | 1995 Acura Integra Coupe

1 Answer

When I begin to reverse, there is a loud prolonged noise that stops when the car is no longer in motion(While in reverse). Can you please tell me what might be causing this?


If the sound comes from the rear axle it can be the brake shoes that need replacing. If its from the front of the car the tranny (auto or stick shift) can be faulty

May 18, 2009 | 1995 Acura Integra Coupe

2 Answers

Honda Acura Integra GS 1991 wiring diagram...


In my experience by far Ebay Motors is your best source for a specific model like this.

Feb 23, 2009 | 1991 Acura Integra Hatchback

Not finding what you are looking for?
1992 Acura Integra Hatchback Logo

804 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...