Question about 1983 Dodge Ram Wagon

1 Answer

Radio installation in 1983 dodge ram van

Need instructions to remove old and install new radio.

Posted by on

  • Anonymous Mar 23, 2014

    radio stoped working need to remove and install a new radio

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 3 Answers

Remove screws from dash face, remove dash face. two 10mm bolts hold stereo in place,remove bolts, gently pull stereo out. unplug stereo. install new stereo by reversing the directions

Posted on Nov 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1983 Ram Van. Where can I get a radio wiring diagram?


1983 Dodge Ram Van Audio Wireing Chart
Car Radio Battery Constant 12v+ Wire: Red
Car Radio Accessory Switched 12v+ Wire: Red/White
Car Radio Ground Wire: Chassis
Car Radio Illumination Wire: Black/Yellow
Left Front Speaker Positive Wire (+): Green
Left Front Speaker Negative Wire (-): Black/Red
Right Front Speaker Positive Wire (+): Violet
Right Front Speaker Negative Wire (-): Black/Red
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Black/Red
Right Rear Speaker Positive Wire (+): Blue/Red
Right Rear Speaker Negative Wire (-): Black/Red

Mar 27, 2016 | Dodge Cars & Trucks

1 Answer

I just got a Insignia cd/stereo/MP3 car radio and I really need an installation manual. Lots of wires, colors, don't know what they power. Where can I get the manual? It's going in my 01 Dodge Ram


Greg,

Do yourself a HUGE favor. Drop $8 on a radio wiring harness connector. You wire it to the aftermarket radio while sitting at your kitchen table. When done, yank the factory radio and simply PLUG IN the new radio directly into the truck's wiring harness. Done! No cutting of your truck's wires, splicing, taping or hanging upside-down making connections. Plus, when it's time to sell the truck - you can pull out your radio and dump the factory radio back in the truck in no time.

Stereo Wire Harness Dodge Ram Pickup 98 99 00 01 Car Radio Wiring...

You can find these at other stores locally too. Good luck!

Nov 30, 2015 | Dodge Cars & Trucks

1 Answer

Have 1996 dodge ram 2500 van. Installed 1983 360. Have done this same swap in a 1992 dodge250 van....no problem with wiring the old ignition system and charging systwem over 1992 harness. this time the bat...


Here is the wiring diagram you asked for.

Charging System

If there are more that you need simply reply back and I can find it for you. Seems like a rather simple system so I am sure this will help.

Jan 25, 2010 | 1996 Dodge Ram 2500 Club Cab

1 Answer

Ok, I have a 1993 Dodge Ram 350 Van. Radio will come on then has signal drift. no Display, won't scan channels, can't change channels??? I.m just wondering if it is a problem with the PLL circuit. (Phase...


it is time to replace the radio and you can get wiring harness adapter over at best buy for about $20. you can also get the hardware at the same time. they are very easy to install with these parts even if you have never done this before. if you want a stock radio, i think you will find that it is 2-4 times the cost of a replacement radio.

Nov 08, 2009 | 1993 Dodge Ram 350

1 Answer

2003 dodge ram 1500 quad cab radio take out


piece of fence wire bent in a U shape and push into the two holes either side of the radio fascia

Oct 24, 2009 | 2006 Dodge Ram 1500

1 Answer

1983 dodge w150 pickup rear drum install


turn the adjuster to loosen the pads to fit the drum back on then from behind use small screwdriver to retighten but not to much

Jun 08, 2009 | 1983 Dodge Pickup

1 Answer

I need instruction on removal/installation of the wiper motor


I need more of the statement...this all I could see;sorry not enough info! I need instruction on removal/installation of the...

Apr 30, 2009 | 1983 Dodge Ram Wagon

1 Answer

How do I install a new starter in a 93 Dodge Ram van B-250 8 cyl.


Park van so that you can safely access the starter. I use ramps under front wheels and put it in park and set the parking brakes. Disconnect positive battery cable at battery, disconnect starter battery cable and ignition wires from starter solenoid (remember terminal locations as these will attach to new starter solenoid). Remove old starter. Replace with new starter. Re-attach wiring in reverse order.

Mar 26, 2009 | 1993 Dodge Ram 250

2 Answers

Car radio install


There should be an actual wire harness for radio back in there somewhere, maybe tied up or bundled up, just have to find it, then buy from stereo or automotive supply place, an adapter that will go from factory plug to your other stereo, and it will make installation much, much easier.

Aug 17, 2008 | 2008 Chevrolet Express

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...